• 제목/요약/키워드: Tube Specimen

검색결과 260건 처리시간 0.03초

미만성 침윤성 폐질환의 외과적 폐생검 (Surgical Lung Biopsy for Diffuse Infiltrative Lung Disease)

  • 이장훈;권진태;이정철
    • Journal of Chest Surgery
    • /
    • 제39권11호
    • /
    • pp.844-849
    • /
    • 2006
  • 배경: 미만성 침윤성 폐질환의 확진을 위해서는 외과적 폐생검이 필요하다. 개흉 폐생검과 흉강경 폐생검 방법을 비교하고 외과적 폐생검이 미만성 간질성 폐질환의 진단에 미치는 영향을 알아보고자 하였다. 대상 및 방법: 2000년 3월부터 2005년 12월까지 영남대학교의료원 흉부외과에서 폐생검을 시행한 환자를 후향적 조사를 하였다. 외과적 폐생검 후 조직학적 진단과 치료방침의 변화를 분석하고 소개흉술을 실시한 군(OLB)과 비디오 흉강경수술을 실시한 군(TLB)으로 나누어 비교 분석하였다. 결과: 전체 환자는 36명이었고 기침이 가장 많은 술 전 증상이었다. OLB군과 TLB군 사이에 수술시간, 마취시간, 재원기간, 흉관거치 기간, 채취한 조직의 용적, 합병증 발생률에는 유의한 차이가 없었다. 전 예에서 술 후 조직학적 진단이 가능하였다. 술 후 33%에서 치료 방침의 변화가 있었고 두 군 간유의한 차이는 없었다. 술 후 사망은 1예가 있었고 술 전 호흡부전이 있었던 환자에서 발생하였다. 결론: 외과적 폐생검은 미만성 침윤성 폐질환을 확진할 수 있는 진단방법이고 술 후 치료 방침의 결정에 많은 도움을 준다. 흉강경 폐생검은 개흉 폐생검에 비해 덜 침습적이고 동일한 조직학적 진단율을 보이므로 외과적 폐생검의 기본 수술술기라 할 수 있다.

일정광량 방식의 광자주사현미경 제작 (Fabrication of the photon scanning tunneling microscope with constant intensity mode)

  • 김지택;최완해;조재홍;장수;김달현;구자용;정승태
    • 한국광학회지
    • /
    • 제10권3호
    • /
    • pp.195-200
    • /
    • 1999
  • 가열인장(heating and pulling)방법을 이용하여 개구부 직경이 약 100nm 이하인 광섬유 탐침을 제작하였으며, 이를 이용하여 일정광량 방식의 광자주사현미경을 제작하였다. 광섬유 탐침을 물체에 미세하게 접근시켜서 물체면을 주사하기 위하여 원통형 PZT(piezoelectric transducer)를 x-y-z의 3부분으로 나누어 z축의 미세접근 및 1.43$\mu\textrm{m}$ $\times$ 1.76$\mu\textrm{m}$의 면적을 x-y축으로 주사할 수 있는 3차원 PZT 주사기를 제작하였다. 그리고 광섬유 탐침에서 검출되는 에바네슨트라의 광량이 항상 일정하도록 전자적인 되먹임 회로에 의한 광섬유 탐침이 1$\lambda$ ($\lambda$ 는 입사파장임) 이하의 근접장 영역에서 물체로부터의 높이가 일정하도록 하였다. 그리고 이렇게 제작된 일정광량 모드의 광자주사 현미경을 이용하여 정상파 형태의 에바네슨트파를 측정하였다.

  • PDF

인체의 위 조직 시료에서 자기공명영상장치를 이용한 확산계수 측정에 대한 기초 연구 (Ex Vivo MR Diffusion Coefficient Measurement of Human Gastric Tissue)

  • 문치웅;최기승;;;양영일;장희경;은충기
    • 대한의용생체공학회:의공학회지
    • /
    • 제27권5호
    • /
    • pp.203-209
    • /
    • 2006
  • The aim of this study is to investigate the feasibility of ex vivo MR diffusion tensor imaging technique in order to observe the diffusion-contrast characteristics of human gastric tissues. On normal and pathologic gastric tissues, which have been fixed in a polycarbonate plastic tube filled with 10% formalin solution, laboratory made 3D diffusion tensor Turbo FLASH pulse sequence was used to obtain high resolution MR images with voxel size of $0.5{\times}0.5{\times}0.5mm^3\;using\;64{\times}32{\times}32mm^3$ field of view in conjunction with an acquisition matrix of $128{\times}64{\times}64$. Diffusion weighted- gradient pulses were employed with b values of 0 and $600s/mm^2$ in 6 orientations. The sequence was implemented on a clinical 3.0-T MRI scanner(Siemens, Erlangen, Germany) with a home-made quadrature-typed birdcage Tx/Rx rf coil for small specimen. Diffusion tensor values in each pixel were calculated using linear algebra and singular value decomposition(SVD) algorithm. Apparent diffusion coefficient(ADC) and fractional anisotropy(FA) map were also obtained from diffusion tensor data to compare pixel intensities between normal and abnormal gastric tissues. The processing software was developed by authors using Visual C++(Microsoft, WA, U.S.A.) and mathematical/statistical library of GNUwin32(Free Software Foundation). This study shows that 3D diffusion tensor Turbo FLASH sequence is useful to resolve fine micro-structures of gastric tissue and both ADC and FA values in normal gastric tissue are higher than those in abnormal tissue. Authors expect that this study also represents another possibility of gastric carcinoma detection by visualizing diffusion characteristics of proton spins in the gastric tissues.

방사선과 촬영실 장비의 세균오염도 측정 (A Study Regarding Measurements of Bacterial Contamination Levels in Radiology Room Equipment)

  • 최은진;송현제;동경래;김창복;류재광;곽종길
    • 방사선산업학회지
    • /
    • 제11권1호
    • /
    • pp.1-6
    • /
    • 2017
  • Reported some level of bacteria in areas that are well made contact in Radiology imaging room evaluate the importance of cleanliness in the hospital management of equipment to check for the presence of pathogenic bacteria. Gwang-ju and Jeol-la city and medium-sized hospitals in the material with a cotton swab and rub evenly Radiology selection cassette, a handle, Apron of the imaging apparatus having the most contact with patients from July 2016 to August 2016 as a target in place and special studios 6, and saline solution will placed in a test tube containing. The swab sample was diluted 1,000 times, you can see the bacteria and the intestinal bacterial selective medium Trypticase Soy Agar (TSA), Muller-Hinton Agar (MHA), Eosin-Methylene Blue (EMB), ENDO(BD, NJ, USA) then incubated smear to. In the incubator (incubator, SANYO, Japan) was observed after incubation of bacteria and counting the total number of bacteria also Colonies (colony) suspected intestinal bacteria were isolated and cultured on KIA medium (BD, NJ, USA). As a result, it was found that this came Gram positive Coccus A hospital handle the F hospital, from the C Gram positive Coccus cassette and handle the F hospital. The striking yellow coloring Staphylococcus aureus 110 agar (STA 110) in the medium sample, but it is suspected staphylococcal Coccus to the final identification in the laboratory is not a single specimen of the two samples from Gram positive Coccus biochemical identification Identification Kit is an API could not, it was thought to be non-Staphylococcus aureus was cultured on blood agar suggesting that (BAP) blood of dance. Dynamic tests were conducted biochemical API kit of the two samples were identified from Gram positive Coccus bacteria Escherichia coli (E. coli) is F hospital cassette was confirmed Eenterobacter cloaca in A hospital possession. Did not aggregate O-26, O-111, O-157 and the serum test was conducted in the laboratory from the E. coli F cassette hospital.

고강도 철근용 충전형 기계적 이음장치 개발 연구 (Development of Filler Type Mechanical Splice for High Strength Re-bar)

  • 이성수;전호민
    • 한국산학기술학회논문지
    • /
    • 제19권12호
    • /
    • pp.686-693
    • /
    • 2018
  • 철근 콘크리트 구조물에 다양한 종류의 철근 이음 방법이 개발되고 이를 현장에서 적용하여 왔다. 지난 여러 연구들에 따르면 철근의 직경이 굵어지고 철근의 강도가 커질 경우, 원가 효율 면에서 기계적 이음이 겹침이음보다 상대적으로 우수한 것으로 나타났다. 본 연구에서는 철근 콘크리트 구조물의 고강도 철근(SD600)에 대한 에폭시 충전형 기계적 이음장치를 제시하고 실험을 실시하였다. 이형 철근을 원형 튜브형 강재로 된 커플러에 삽입하고 고강도 에폭시 충전재를 커플러 안으로 주입하면 커플러 안에서 충전재가 경화되면서 이음 장치가 구성된다. 에폭시의 압축강도, 커플러의 길이, 철근의 지름 등에 따른 에폭시 충전형 기계적 이음장치에 대한 일방향 인장시험을 수행하였으며, 실험체의 파괴하중 및 파괴 양상을 관찰하였다. 실험 결과, 실험체의 실제 파괴하중은 에폭시 충전재의 예상 파단 내력의 약 2배 이상으로 나타나 강재 커플러의 구속으로 인하여 경화 에폭시 충전재의 파괴하중이 크게 증가했다는 것을 확인하였다.

Synthesis of barium-doped PVC/Bi2WO6 composites for X-ray radiation shielding

  • Gholamzadeh, Leila;Sharghi, Hamed;Aminian, Mohsen Khajeh
    • Nuclear Engineering and Technology
    • /
    • 제54권1호
    • /
    • pp.318-325
    • /
    • 2022
  • In this study, composites containing undoped and barium-doped Bi2WO6:Ba2+were investigated for their shielding against diagnostic X-ray. At first, Bi2WO6 and barium-doped Bi2WO6 were synthesized with different weight percentages of barium oxide through a hydrothermal process. The as-synthesized nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and Raman spectroscopy (RS). After that, some shields were generated with undoped and barium-doped Bi2WO6:Ba2+ nanostructure particles incorporated into polyvinyl chloride (PVC) polymer with different thicknesses and 15% weight of the nanostructure. Finally, the prepared samples were exposed to an X-ray tube at 40, 80, and 120 kV voltages, 10 mAs and, 44.5 cm SID (i.e. the distance from the X-ray beam source to the specimen). Linear and mass attenuation coefficients were also calculated for different samples. The results indicated that, among the samples, the one with 7.5 mmol barium-doped Bi2WO6 had the most attenuation at the voltage of 40kV, and the attenuation coefficients would increase with an increase in the amount of barium. The samples with 15 and 17.5 mmol barium-doped Bi2WO6 had higher attenuation than the others at 80 and 120 kV. Moreover, the half-value layer (HVL), tenth-value layer (TVL) and 0.25 mm lead equivalent thickness were calculated for all the samples. The lowest HVL value was for the sample with 7.5 mmol barium-doped Bi2WO6. As the result clearly show, an increment in the barium-doping content leads to a decrease in both HVL and TVL. In every three voltages, 0.25 mm lead equivalent thickness of the barium-doped composites (7.5 mmol and 15 mmol) had less than the other composites. The lowest value of 0.25 mm lead equivalent thickness was 7.5 barium-doped in 40 kV voltage and 15 mmol barium-doped in 80 kV and 120 kV voltages. These results were obtained only for 15% weight of the nanostructure.

헤테로코어 광섬유를 이용한 콘크리트 응력 측정용 매립형 센서모듈의 개발 (Development of Embedded Type Sensor Module for Measuring Stress of Concrete Using Hetero-core Optical Fiber)

  • 양희원;이환우
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권2호
    • /
    • pp.68-75
    • /
    • 2022
  • 본 연구에서는 PSC 구조물의 프리스트레스를 직접적으로 평가하기 위해 헤테로코어 광섬유를 활용하여 콘크리트의 변형량 계측을 기반으로 하는 새로운 센서모듈을 제안하고 성능실험을 수행하였다. 헤테로코어 광섬유는 전송로의 특정 부분이 구부러지면 광 손실이 발생하며, 곡률의 크기에 따라 광 손실량이 선형적으로 변한다. 센서모듈의 계측 성능과 광섬유의 적용성을 확인하기 위해 센서모듈에 변형을 발생시키며 광섬유를 통과하는 빛을 전력으로 변환하여 측정하였다. 센서모듈을 매립시킨 지름 15cm, 높이 35cm의 원주형 콘크리트 공시체에 최대 변형량 0.5mm을 0.12mm/min의 속도로 발생시키는 동안 광섬유를 통과한 빛은 변형과의 관계에서 0.9333의 선형성을 가지는 것을 확인할 수 있었다. 이번 실험의 결과를 통해 헤테로코어형 광섬유를 활용한 센서모듈을 구조물에 매립하여 콘크리트 압축변형량 계측을 통해 PSC 구조물의 프리스트레스를 직접적으로 평가하는 것이 가능할 것으로 판단되며, 앞으로 진행될 PSC 부분 거더 모델 실험에 적용할 쉬스관 일체형 센서모듈 개발에 유용한 자료로 활용될 수 있을 것으로 판단된다.

Simulation of the effect of inclusions length and angle on the failure behavior of concrete structure under 3D compressive test: Experimental test and numerical simulation

  • Mohammad Saeed, Amini;Vahab, Sarfarazi;Kaveh, Asgari;Xiao, Wang;Mojtaba Moheb, Hoori
    • Steel and Composite Structures
    • /
    • 제46권1호
    • /
    • pp.53-73
    • /
    • 2023
  • Man-made structure materials like concrete usually contain inclusions. These inclusions affect the mechanical properties of concrete. In this investigation, the influence of inclusion length and inclination angle on three-dimensional failure mechanism of concrete under uniaxial compression were performed using experimental test and numerical simulation. Approach of acoustic emission were jointly used to analyze the damage and fracture process. Besides, by combining the stress-strain behavior, quantitative determination of the thresholds of crack stress were done. concrete specimens with dimensions of 120 mm × 150 mm × 100 mm were provided. One and two holes filled by gypsum are incorporated in concrete samples. To build the inclusion, firstly cylinder steel tube was pre-inserting into the concrete and removing them after the initial hardening of the specimen. Secondly, the gypsum was poured into the holes. Tensile strengths of concrete and gypsum were 2.45 MPa and 1.5 MPa, respectively. The angle bertween inclusions and axial loadind ary from 0 to 90 with increases of 30. The length of inclusion vary from 25 mm to 100 mm with increases of 25 mm. Diameter of the hole was 20 mm. Entirely 20 various models were examined under uniaxial test. Simultaneous with experimental tests, numerical simulation (Particle flow code in two dimension) were carried out on the numerical models containing the inclusions. The numerical model were calibrated firstly by experimental outputs and then failure behavior of models containing inclusions have been investigated. The angle bertween inclusions and axial loadind vary from 0 to 90 with increases of 15. The length of inclusion vary from 25 mm to 100 mm with increases of 25 mm. Entirely 32 various models were examined under uniaxial test. Loading rate was 0.05 mm/sec. The results indicated that when inclusion has occupied 100% of sample thickness, two tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. When inclusion has occupied 75% of sample thickness, four tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. When inclusions have occupied 50% and 25% of sample thickness, four tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. Also the inclusion was failed by one tensile crack. The compressive strength of samples decease with the decreases of the inclusions length, and inclusion angle had some effects on that. Failure of concrete is mostly due to the tensile crack. The behavior of crack, was affected by the inclusion length and inclusion number.

경피적 폐생검의 진단성적 및 합병증 (The Diagnostic Yield and Complications of Percutaneous Needle Aspiration Biopsy for the Intrathoracic Lesions)

  • 장승훈;김철현;고원중;유철규;김영환;한성구;심영수
    • Tuberculosis and Respiratory Diseases
    • /
    • 제43권6호
    • /
    • pp.916-924
    • /
    • 1996
  • 연구배경: 경피적 폐생검은 흉부 병소의 진단을 얻기위해 흔히 이용되는 검사 방법으로써, 축적된 경험, 검칩의 개발, 영상 유도 방법의 개선으로 진단 성적이 높아지고 있으며, 기존의 논문들이 28 - 98%의 진단 성적을 보고하며 시술에 의한 합병증은 그 정도가 가벼워서 비교적 안전하게 시행될 수 있다고 알려져 있다. 저자들은 서울대학병원에서 1년 동안 시행된 경피적 폐생검 결과를 검토하여 그의 진단 성적과 합병증의 빈도와 정도를 조사하고 진단 성적에 영향을 미치는 요인들을 평가하고자 본 연구를 시작하였다. 방법: 1994 년 1월부터 1994년 12월까지, 흉부병소를 가진 236명의 환자에게 시행된 287 회의 경피적 폐생검 결과를 검토하여 양성 및 악성 질환에 대한 진단 성적과 합병증의 발생 빈도를 조사하였다. 병소는 21- 23 G Chiba needle로 흡인하였고, 필요시 19 - 20 G Biopsy gun으로 생검을 실시 하여 미생물학적 검사, 세포진 검사, 병리 조직학적 검사를 시행하였다. 그 결과 및 합병증의 발생 빈도는 병록지만을 참고하여 산출되었다. 병변의 형태와 크기에 따른 진단 성적은 chi square 방법으로 통계 처리하여 비교하였다(P<0.05). 결과: 병변의 위치는 우상엽 26.3%, 우중엽 6.4%, 우하엽 21.2%, 좌상엽 16.8%, 좌하엽 10.6%, 2엽 이상의 부위에 병변이 있었던 경우가 17.4%, 종격동 1.3% 였다. 병변의 형태는 경화성 병변이 19.9%, 결절 또는 종괴성 병변이 80.1% 였다. 236명 중 양성 질환자는 74명, 악성질환자는 142명, 경피적 폐생검을 포함한 어떤 검사로도 진단이 밝혀지지 않은 환자는 22명 이었고, 2명은 폐암과 폐결핵을 같이 가지고 있었다. 236 명을 대상으로 총 287 회의 경피적 폐생검이 시행되었는데, 이것으로 확진된 경우가 양성 질환자의 경우 46명으로 62.2%, 악성 질환자의 경우 117명으로 82.4%의 진단 성적을 보였다. 경피적 폐생검을 1차로 시행하여 진단에 이르지 못한 경우 2차, 3차 재 시술 함으로써 양성 질환의 경우 44.6%, 60.8%, 62.2%로, 악성 질환의 경우 73.9%, 8 1.7%, 82.4%로 진단 성적을 높일 수 있었다. 악성 질환자 43 명과 양성 질환자 9명에서 개흉술을 실시하였는데 개흉술과 경피적 폐생검의 병리학적 검사 결과가 일치하였던 경우는 악성과 양성에서 각각 25 명과 4명 으로 58.1% 와 44.4 %의 일치율을 보였다. 또한 약성 질환자 4명과 양성 질환자 2명은 개흉술 후 악성과 양성의 진단이 바뀌었다. 287례의 시행 중 합병증은 각혈 3 례, 경미한 혈담 55 례, 기흉 36례, 발열 3례로 빈도는 각각 1.0%, 19.2%, 12.5%, 1.0 % 였다. 합병증 발생시 각혈과 혈당은 모두 치료를 요하지 않았고, 기흉은 8례에서 흉관 또는 픽테일 카테터를 삽입하였으며, 발열은 모두 48 시간 내에 자연 소실되었다. 병변의 형태와 크기에 따른 진단 성적의 차이는 없었다. 결론: 경피적 폐생검은 진단 성적이 비교적 높고 합병증의 정도가 낮아 흉부 영소의 진단에 유용하지만 병리 조직학적 진단의 정확도는 개선이 필요하다고 생각된다.

  • PDF

연골피막편 이식후 기관 결손부위의 재생에 관한 실험적 연구(제 1 보) (Tracheal Reconstruction with Perichondrial Graft - An Experimental Study in Rabbits -)

  • 이원상;서장수;이성은;홍원표;박찬일
    • 대한기관식도과학회:학술대회논문집
    • /
    • 대한기관식도과학회 1982년도 제16차 학술대회연제순서 및 초록
    • /
    • pp.10.3-11
    • /
    • 1982
  • 근래에 기도 협착의 발생빈도는 수술요법의 괄목할만한 진전과 Low pressure cuff가 개발된 후 현저히 감소하고 있으나 호흡부전으로 Ventilator를 사용하는 경우와 심한 상기도 감염이나 손상이 있을 때 또는 장기간 삽관을 함으로서 발생하는 기관 협착증은 아직도 이비인후과 영역에 있어서 난제라고 하겠다. 이러한 기도 협착증의 치료로는 기계적으로 확장을 하거나 협착 부위를 수술적으로 제거하고 조직을 이식하는 여러 방법들이 있어서 그적응증에 따라 각각 사용되어 오고 있으나 아직까지도 만족할만한 결과를 얻지 못하는 때가 많은 실정이다. 1959년 Lester가 우연히 늑골의 잔존 연골피막으로부터 신생 연골이 재생된 것을 발견한 이후 Skoog(1972), Sohn(1974), Ohlsen(1975)등은 동물 실험을 통하여 연골 피막으로 부터의 연골 재생에 관하여 다각적인 보고를 하였다. 임상적으로 이개, 비중격, 늑골 및 피부편등 여러 가지 다양한 조직들이 기관의 결손 또는 협착 부위의 재생에 사용되어 왔으나 기관의 정상적인 지지 조직의 연골이며 또한 연골피막이 연골의 재생을 가능케 한다는 점에 입각하여 기관의 재건에 연골피막의 사용가능성을 알아 보고저 다음의 실험을 하였다, 가토의 이개연골에서 연골피막을 취한후 인위적으로 만든 가토의 기관 결손부위에 이식한 다음 2주부터 8주경과 할때 까지의 재생 변화를 관찰하여 다음과 같은 결론을 얻었다. (결론) 1) 기관결손 부위의 재생은 대조군에서는 결손부위에 섬유질 및 혈관으로 구성되었으나 이식군에서는 비후된 연골피막과 섬유질로 구성되었다. 2) 점막의 재생은 대조군과 이식한군 모두에서 2주경과 표본부터 정상점막으로 완전히 재생 되었다. 3) 이식 부위의 변화를 보면 2주-모세혈관의 확장과 염증반응을 동반하며 섬유조직의 증식시작이 관찰되었다. 4주-점차 모세혈관의 확장이 감소하며 염증반응의 감소가 있으며 점막하층의 섬유조직의 증식이 있고 1개의 표본에서 연골피막내에 미숙연골 세포군이 존재. 6주-경도의 모세혈관의 확장과 만성염증반응이 존재하며 점막하층의 섬유조직화가 존재하였으며 2개의 표본에서 연골피막내에 연골 세포군 및 골화현상이 존재하였다. 8주-경미한 모세혈관의 확장이 존재하였으나 염증반응은 소실되었고 점막하층에 심한 섬유화를 동반하였다. 표본 2개에서 연골 피막내에 연골 세포군의 존재가 관찰되었다. 4 ) 이식방법을 달리한 경우에도 연골 및 점막의 재생에는 유의한 차이를 발견할 수 없었다. 5) 연골피막 이식부위에서 미숙연골 세포군과 endo-chondrial ossification을 관찰할 수 있었으나 대조군에서는 결손부위의 섬유화만이 관찰되었다. 이상의 결과로 볼때 연골피막은 기관결손부위의 재진에 적합한 조직이라할 수 있었다. 그러나 40 례의 표본중 5례의 표본에서만 연골의 세포군을 관찰할 수 있어 이로 미루어 볼때 연골피막으로 부터 신생 연골이 재생된다 확인하기는 불충분하다고 생각되며 앞으로의 추시가 요망된다 하겠다.

  • PDF