• Journal of Animal Science and Technology
• /
• v.51 no.5
• /
• pp.369-378
• /
• 2009

Protein fractionation was evaluated from whole crop silages of rye (RS), wheat (WS), triticale (TS), oat (OS), barley (BS), and rice straw silage (RSS), and in vitro trial was carried out to examine the effect of silage and extraction of soluble protein on fermentation characteristics, total gas production and degradation. Soluble protein of silages was extracted with borate-phosphate buffer, and fermentation characteristics, gas production and degradation of silages were estimated by incubating anaerobically the mixed solution of strained rumen fluid and artificial saliva (1:1, v/v) containing dried and ground silages placed in nylon bag at $39^{\circ}C$ up to 48h. Soluble protein (SP) content was lowest for RSS as 2.11% in total CP compared to those for other silages. Highest A fraction (NPN) was observed from RS (74.33% of total CP) while those from TS and RSS were relatively low (48%). B2 fraction was relatively higher for RS, RSS and WS than for TS and BS. $B_3$ fraction was lowest in WS among silages. C fraction (27.07) in RSS was higher than in other silages (1.40~9.93%). pH in incubation solution was increased (P<0.01~P<0.001) for extracted silages up to 12h but decreased (P<0.01) at 48h for non-extracted ones. Contents of ammonia-N (P<0.001) and total VFA (P<0.01~P<0.001) were higher for non-extracted silages than for extracted ones. Acetate proportion was increased (P<0.001) in buffer extracted silages while those of propionate and butyrate were decreased (P<0.001) up to 24h incubation. Increased (P<0.001) total gas production was obtained from non-extracted silages up to 12h while gas production was increased (P<0.01) in extracted ones thereafter. In vitro degradation of dry matter and CP was increased (P<0.001) in non-extracted silages but that of neutral detergent fiber was increased (P<0.001) in extracted ones without difference among silages. Difference in mean values of degradability for each silage prior to- and post extraction with borate buffer, however, was not found among silages. It may be concluded that high NPN content of silages may reduce the protein availability in silages and borate buffer soluble components in silages can stimulate the early stage of fermentation.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.16 no.2
• /
• pp.57-77
• /
• 2003

Objectives: The aim of this study was to investigate the depigmentation effects of Barley, Unpolished rice, Job's-tear. Metbods: We investigated that the extracts of Barley, Unpolished rice, Job's-tear inhibit activity of tyrosinase, the enzyme which convert ts 3-(3,4-dihydroxyphenyl) alanine to dopachrom in the biosynthetic process of melanin, the UV absorbance of the extracts in the UV-A region and UV-B region was measured by UV scanning, the effect of extracts on cell viability and melanin production in cultured B16 mouse melanoma cells were measured, and cytoprotective effects of extracts on PC12 cells injured by hydrogen peroxide measured by MTT assay. Results: The extracts of Barley, Unpolished rice, Job's-tear inhibited activity of tyrosinase in low density. The Barley, Job's-tear extracts not only showed inhibitory effects on melanin production in cultured B16 mouse melanoma cells, but also exhibited cytoprotective effects on PC12 cells injured by hydrogen peroxide in low density. Unpolished rice extract showed inhibitory effect on melanin production in cultured B16 mouse melanoma cells, but did not showed cytoprotective effect Barley, Unpolished rice, Job's-tear extracts did not showed an absorbance effect in the UV-A region and UV-8 region. Conclusions: These results suggest that Barley, Unpolished rice, Job's-tear inhibit melanin biosynthesis which is involved in hyperpigmentation and could be used as a whitening agent.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.2909-2912
• /
• 2009

The amines studied in this study are less reactive toward ethyl propiolate (3) in MeCN than in H$_2$O although they are 7 to 9 pK$_a$ units more basic in the aprotic solvent. The reactivity of morpholine and deuterated morpholine toward 3 is found to be identical, indicating that proton transfer occurs after rate-determining step (RDS). The fact that kinetic isotope effect is absent excludes a stepwise mechanism in which proton transfer occurs in RDS as well as a concerted mechanism in which nucleophilic attack and proton transfer occur concertedly through a 4-membered cyclic transition state (TS). Thus, the reactions have been concluded to proceed through a stepwise mechanism in which proton transfer occurs after RDS. Brønsted-type plots are linear with small ${\beta}_{nuc}$ values, i.e., ${\beta}_{nuc}$ = 0.29 in H$_2$O and ${\beta}_{nuc}$ = 0.51 in MeCN, indicating that bond formation is not advanced significantly in RDS. The small ${\beta}_{nuc}$ value also supports the conclusion drawn from the study of kinetic isotope effect.

• Journal of Animal Environmental Science
• /
• v.17 no.1
• /
• pp.49-54
• /
• 2011

Animal manure is produced annually 43.7 million tonnes in Korea. Among them, about 85.6 % are used as compost or liquid fertilizer to the agricultural land. The animal manure can be effectively utilized by mixing with organic byproducts that result in generation of biogas from anaerobic co-digestion process. This study aimed to optimize the content of total solid materials (TS) and determine the effect of organic byproduct on the co-digestion process. Prior to the byproduct treatments, determination of proper content of TS was conducted by controlling at 5 or 10 %. For the byproduct treatments, swine manure without adding the byproduct was used for control treatment, and swine manure mixed with either corn silage or kitchen waste was used for other treatments. Volume of biomethane ($CH_4$) generated from digested materials was quantified before and after byproduct treatments. In result, a 1.4-fold higher biomethane, about 0.556 L/$L{\cdot}d$, was produced when the content of TS was controlled at 10 %, compared at 5 %, about 0.389 L/$L{\cdot}d$. When the swine manure was mixed with the corn silage or kitchen waste, a two-fold higher biomethane was produced, about 1.theand 1.0heL/$L{\cdot}d$, respectively, compared to the control treatment. Biogas production from organic dry matter (odm) was a3, 362eand 2h6 L/kg odm${\cdot}$d for control, corn silage, and kitchen waste treatment, respectively. The lower biogas production in the treatment of kitchen waste than that of corn silage is associated with its relatively high odm contents. The methane concentration during the whole process ranged from 40 at the beginning to 70 % at the end of process for both the control and kitchen waste treatments, and ranged from 52 to 70 % for the corn silage treatment. Hydrogen sulfide ($H_2S$) concentration ranged between 350 and 500 ppm. All the integrated results indicate that addition of organic byproduct into animal manure can double the generation of biogas from anaerobic fermentation process.

• Journal of Ginseng Research
• /
• v.25 no.4
• /
• pp.150-155
• /
• 2001

This study examined effects of the active ingredients from ginseng on paraquat(PQ) toxitity. Mice were given PQ(25mg/kg, ip) and then they were given total saponins (TS; 5mg/kg, orally), protopanaxadiol (PD; 5mg/kg, orally) and protopanaxatriol(PT; 5mg/kg, orally) per day for periods of 1,3 & 7 days. We measured the activities of superoxide dismutase (SOD), electrophoretic isozyme band, catalase (CAT) were compared in the liver of mouse that dose with PQ and/or TS, PD and PT. The activities of SOD, CAT were generally higher in PQ+PD group than others groups. Especially the activity of SOD was the highest in PQ+PD group than others groups. SOD isozyme separated into three bands by electrophoresis. One band was located to near the anode side and two bands were cathode side. As the results of treated with KCN, we were confiremed that the Cu, Zn-SOD was located to near the anode side but the Mn-SOD were cathode side. Our results suggested that an antioxidant effect of ginseng saponins elevated a protection ability to an oxidative damage by direct action of SOD, CAT and reinforced the synthetic ability of endogenous antioxidant material in living organism. Particularly, PD was a effective antioxidant compared with others.

• Journal of Nutrition and Health
• /
• v.35 no.9
• /
• pp.943-951
• /
• 2002

This study was designed to investigate the effects of iron supplementation and nutrition education on the iron status and anemia of high school girls. The subjects resided in Ulsan city in Korea and were already diagnosed as having anemia or iron deficiency. Over a period of three months, one iron tablet (80 mg Fe as ferrous sulfate/day) was administered to the iron deficient subjects and two tablets (160 mg Fe as ferrous sulfate/day) were administered to the anemia subjects. The average height and weight of anemia subjects were 161.24 $\pm$ 4.50 cm and 50.87 $\pm$ 5.86 kg, respectively. The average BMI (kg/$m^2$ )was 19.58 $\pm$ 2.03 and the PIBW(percent ideal body weight) were 92.52 $\pm$ 9.84%. Except for vitamin A and vitamin C intakes, the intake levels of all other nutrients were below the RDA. Total calorie intakes of anemia subjects were 73.5% of RDA. The iron intakes of subjects from food were 69. 1% of RDA and the Ca intakes were 59.1% of RDA. The basal hemoglobin(Hb) concentration of anemia subjects averaged 10.77 $\pm$ 1.33 g/dl, and this increased significantly (p < 0.001) to 12.12 $\pm$ 1.08 g/dl, after iron supplementation. The basal ferritin, and transferrin saturations ｛TS (%)｝of anemia subjects were 12.51 $\pm$ 15.19 ng/$m\ell$ and 8.43 $\pm$ 7.56%, respectively, and these significantly increased to 20.59 $\pm$ 22.39 ng/$m\ell$ and 15.56 $\pm$ 12.87%, respectively. The level of total iron binding protein (TIBC) significantly decreased from the initial 486.80 $\pm$ 70.16 $\mu\textrm{g}$/dl to 417.86 $\pm$ 67.73 $\mu\textrm{g}$/dl (p < 0.001) after iron supplementation. For the iron deficiency subjects, the ferritin, iron and TS(%) levels were increased significantly (p < 0.001) and the TIBC levels were significantly (p <0.001) decreased after iron supplementation. Anemia symptoms such as 'Feeling blue (p<0.05)', 'Decreased ability to concentrate (p<0.001)' and 'Poor memory (p<0.05)' improved significantly after iron supplementation in the anemia subjects. The number of tablets administered was positively correlated with changes in serum hemoglobin (t=0.194, p< 0.01), serum ferritin (t=0.181, p<0.01), TS(%) (t=0.141, p<0.05), and hematocrit (t=0.254, p<0.01), and was negatively correlated with changes in TIBC (t=-0.143. p<0.05) and red cell distribution width (RDW, t=-0.140, p<0.05). In conclusion, daily iron supplementation was effective in improving the iron status and reducing symptoms of anemia in high school girls. (Korean J Nutrition 35 (9) : 943~951,2002)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1301-1307
• /
• 2011

Electrosurgical knee wand (EKW) is a high-frequency thermocautery instrument and is often used for coagulation, ablation, excision, and extirpation of knee ligaments and tissues. In order to maximize the success rate, ease, and safety of knee surgery using EKW and radiofrequency ablation, it is necessary to ensure that the EKW selectively approaches the lesion with utmost accuracy and safety. The key feature of this instrument is its excellent maneuverability. Hence, the authors constructed a tensile spring model based on a shape memory alloy (SMA), which exhibits the shape memory effect. This model can be used in knee surgery as it is considered the most biocompatible femorotibial surgical actuator. The changes in external temperature with current and the thermoelectric characteristics of the SMA were investigated. The relationship between the restoring force and the typical stroke (TS) in response to the conditions in the SMA tensile spring design were evaluated. In conclusion, as the diameter of the SMA tensile spring decreased, the maximum temperature increased. The strain in the actuator caused a stable and proportional increase in the force and induced current for up to 15s, but this increase became very unstable after 30s. Moreover, the relationship between the current and the TS was more stable than that between the current and the restoring force.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.12 no.2
• /
• pp.117-123
• /
• 2006

To mass-product useful biopolymer films, chitosan/gelatin blend films were prepared by solution casting method. Effect of mixing ratio, tensile strength(TS), elongation(${\Delta}E$) at break, total color difference(E), water vapor permeability(WVP) and oxygen permeability(OP) on chitosan/gelatin blend films properties were investigated. TS, ${\Delta}E$, E, WVP and OP values of chitosan/gelatin blend films were 43.43-38.30 MPa, 9.02-15.09%, 1.28-3.81, $0.8420-0.9673ng{\cdot}m/m^2{\cdot}s{\cdot}Pa$ and $1.5472{\times}10^{-7}-1.5424{\times}10^{-7}mL{\cdot}{\mu}m/m^2{\cdot}s{\cdot}Pa$, respectively. TS of the blend films decreased, while E and E of the blend films increased with increasing chitosan content. WVP and OP of the blend films did not show any significant relationship with mixing ratio and thickness of the blend films. OP of the blend films were lower than those of low density polyethylene and oriented polypropylene.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.10
• /
• pp.651-655
• /
• 2012

This study aimed to investigate the effect of an inorganic conditioner composed of natural inorganic materials on the dewaterbility of sewage sludge and compare the performance with those of conventional organic polymeric conditioners. A dosage of 2.0 mg inorganic conditioner/g sludge TS decreased time to filter test (TTF), specific resistance to filtration (SRF), water content of dewatered sludge cake, turbidity from 146 to 41 sec, from $8.3{\times}10^{14}$ to $2.4{\times}10^{14}$ m/kg, from 82.1 to 77.1%, from 112 to 61.1 NTU, respectively, which was compatible to the conventional cation organic polymer. An inorganic conditioner would be used in sewage sludge treatment as a suitable alternative conditioner. Regression analysis showed a strong relationship among TTF, SRF, and water content.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.2
• /
• pp.56-59
• /
• 2011

The characterization of the chemical mechanical polishing (CMP) process for undensified phophosilicate glass (PSG) film is reported using design of experiments (DOE). DOE has been used by experimenters to understand the relationship between the input variables and responses of interest in a simple and efficient way, and it typically is beneficial for determining the appropriatesize of experiments with multiple process variables and making statistical inferences for the responses of interest. The equipment controllable parameters used to operate the machine consist of the down force of the wafer carrier, pressure on the back side wafer, table and spindle speeds (SS), slurry flow (SF) rate, pad condition, etc. None of these are independent ofeach other and, thus, the interaction between the parameters also needs to be understoodfor improved process characterization in CMP. In this study, we selected the five controllable equipment parameters the most recommendedby process engineers, viz. the down force (DF), back pressure (BP), table speed (TS), SS, and SF, for the characterization of the CMP process with respect to the material removal rate and film uniformity in percentage terms. The polished material is undensified PSG which is widely used for the plananization of multi-layered metal interconnects. By statistical modeling and the analysis of the metrology data acquired from a series of $2^{5-1}$ fractional factorial designs with two center points, we showed that the DF, BP and TS have the greatest effect on both the removal rate and film uniformity, as expected. It is revealed that the film uniformity of the polished PSG film contains two and three-way interactions. Therefore, one can easily infer that process control based on a better understanding of the process is the key to success in current semiconductor manufacturing, in which the size of the wafer is approaching 300 mm and is scheduled to continuously increase up to 450 mm in or slightly after 2012.