• 한국주조공학회지
• /
• 제14권5호
• /
• pp.412-418
• /
• 1994

Efficient algorithm for the solidification simulation by FDM is described from the practical point of views. If a proper time step ${\Delta}t$ is selected, the calculation is accelerated by implicit algorithm with the temperature recovery method of latent heat method. The implicit routine in the calculation is processed by SOR method(relaxation factor＝1.5, truncation error＝$10^{-4}$). The calculation is more accelerated by linear-interpolated explicite algorithm with a time step larger than the minimum value of the time step. This explicit method, which is applicable to the practical casting simulation problems, produces almost same results with about 40% faster calculation speed compared with the conventional explicit method.

• 지질공학
• /
• 제18권4호
• /
• pp.381-391
• /
• 2008

본 연구에서는 수치해석의 시간차분에서 발생하는 절단오차를 극복하는 방안으로 고유치 기법을 도입하였다. 고유치기법은 모의를 할 때 공간만을 이산화하는 특징을 가지며, 공간적으로 이산화된 방정식을 대각화시킴으로써 선형동력학적 시스템을 분리시킨 후 시간적분을 이용한 계산이 임의의 위치에서 임의의 시간에 대해 개별적으로 또 연속적으로 수행된다. 이러한 고유치기법을 이용하여 오염물 이동을 모의하고 이를 해석해와 비교 검증하였고, 동일한 조건에서 유한요소법을 이용한 수치모형과 고유치 기법을 이용한 용질이동의 예측을 실시한 결과 고유치기법을 이용할 경우 계산시간과 저장용량이 수치모형에 비해 절약됨을 확인할 수 있었다. 고유치 기법을 이용하여 지하유류저장 공동주위의 불균일 유속장에서 용질의 이동을 분석하였다 이 방법이 모의발생에 오랜 시간이 걸리는 문제에 유용하게 사용될 수 있으므로, 공동에 인접한 오염원으로부터 공동의 안전성을 평가하기 위한 민감도 분석에 이 방법을 적용하였으며, 모의결과에 의하면, 종분산지수와 횡분산지수가 각각 50 m, 5 m일 때 공동에 도달하는 시간은 약 50년으로 추정되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.863-864
• /
• 2005

In recent years, we use overdriving scheme to improve the response time of the liquid crystal. Since conventional overdriving scheme uses memory to perform ideal processing, it is desired to reduce system cost by decreasing the data stored in these SDRAMs. As a general compression method, quantization, sub-sampling and Block Truncation Coding ( BTC ) are used, which process data in block base and cause block effect. So we proposed new data compression method by color space conversion. Because this method compresses luminance and chrominance signal by different ratio, it can efficiently reduce error of block effect in decompression image.

• 대한전기학회논문지
• /
• 제39권6호
• /
• pp.598-606
• /
• 1990

Common problems encountered when orthogonal functions are used in system analysis and state estimation are the time consuming process of high order matrix inversion required in finding the Kronecker products and the truncation errors. In this paper, therefore, a method for the analysis of bilinear systems using Walsh, Block pulse, and Haar functions is devised, Then, state estimation of bilinear system is also studied based on single term expansion of orthogonal functions. From the method presented here, when compared to the other conventional methods, we can obtain the results with simpler computation as the number of interval increases, and the results approach the original function faster even at randomly chosen points regardless of the definition of intervals. In addition, this method requires neither the inversion of large matrices on obtaining the expansion coefficients nor the cumbersome procedures in finding Kronecker products. Thus, both the computing time and required memory size can be significantly reduced.

• 대한전자공학회논문지
• /
• 제24권5호
• /
• pp.849-855
• /
• 1987

This paper describes an implementation of the absolute moment block truncation coding(AMBTC) in real time for the moving picture data compression. We have realized a system composed of the encoder and decoder, and operated it using an NTSC TV signal. The encoder consists of a 4-1line buffer memory and a data processing block. Besides, there are signal conditioner and a control signal generator. Experimental results show that the quality of the processed image with a data rate of 10Mb/s is slightly degraded, but not objectionable, comparing data rate of 80Mb/s.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권2호
• /
• pp.485-499
• /
• 2021

Although non-binary low-density parity-check (NB-LDPC) codes have better error-correction capability than that of binary LDPC codes, their decoding complexity is significantly higher. Therefore, it is crucial to reduce the decoding complexity of NB-LDPC while maintaining their error-correction capability to adopt them for various applications. The extended min-sum (EMS) algorithm is widely used for decoding NB-LDPC codes, and it reduces the complexity of check node (CN) operations via message truncation. Herein, we propose a low-cost CN processing method to reduce the complexity of CN operations, which take most of the decoding time. Unlike existing studies on low complexity CN operations, the proposed method employs quick selection algorithm, thereby reducing the hardware complexity and CN operation time. The experimental results show that the proposed selection-based CN operation is more than three times faster and achieves better error-correction performance than the conventional EMS algorithm.

• 수산경영론집
• /
• 제38권2호
• /
• pp.79-101
• /
• 2007

The purpose of this study is to estimate the economic value of the Songieong Beach in Off-season, using a Individual Travel Cost Model(ITCM). Songieong Beach is located in Busan but far away from city. These days, however, the increased rate of traffic inflow to the Songieong beach and the five-day working week are reflected in the trend analysis. Moreover, people have changed psychological value. For that reason, visitors are on the increase on the beach in off-season. The ITCM is applied to estimate non-market value or environmental Good like a Contingent Valuation Method and Hedonic Price Model etc. The ITCM was derived from the Count Data Model(i.e. Poisson and Negative Binomial model). So this paper compares Poisson and negative binomial count data models to measure the tourism demands. The data for the study were collected from the Songjeong Beach on visitors over the a week from November 1 through November 23, 2006. Interviewers were instructed to interview only individuals. So the sample was taken in 113. A dependent variable that is defined on the non-negative integers and subject to sampling truncation is the result of a truncated count data process. This paper analyzes the effects of determinants on visitors' demand for exhibition using a class of maximum-likelihood regression estimators for count data from truncated samples, The count data and truncated models are used primarily to explain non-negative integer and truncation properties of tourist trips as suggested by the economic valuation literature. The results suggest that the truncated negative binomial model is improved overdispersion problem and more preferred than the other models in the study. This paper is not the same as the others. One thing is that Estimating Value of the Beach in off-season. The other thing is this study emphasizes in particular 'travel cost' that is not only monetary cost but also including opportunity cost of 'travel time'. According to the truncated negative binomial model, estimates the Consumer Surplus(CS) values per trip of about 199,754 Korean won and the total economic value was estimated to be 1,288,680 Korean won.

• 한국도서관정보학회지
• /
• 제21권
• /
• pp.253-289
• /
• 1994

The purpose of this study is about the search pattern of LINNET (Library Information Network System) OPAC users by transaction log, maintained by POSTECH(Pohang University of Science and Technology) Central Library, to provide feedback information of OPAC system design. The results of this study are as follows. First, for the period of this analysis, there were totally 11, 218 log-ins, 40, 627 transaction logs and 3.62 retrievals per a log-in. Title keyword was the most frequently used, but accession number, bibliographic control number or call number was very infrequently used. Second, 47.02% of OPAC, searches resulted in zero retrievals. Bibliographic control number was the least successful search. User displayed 2.01% full information and 64.27% local information per full information. Third, special or advanced retrieval features are very infrequently used. Only 22.67% of the searches used right truncation and 0.71% used the qualifier. Only 1 boolean operator was used in every 22 retrievals. The most frequently used operator is 'and (&)' with title keywords. But 'bibliographical control number (N) and accessionnumber (R) are not used at all with any operators. The causes of search failure are as follows. 1. The item was not used in the database. (15, 764 times : 79.42%). 2. The wrong search key was used. (3, 761 times : 18.95%) 3. The senseless string (garbage) was entered. (324 times : 1.63%) On the basis of these results, some recommendations are suggested to improve the search success rate as follows. First, a n.0, ppropriate user education and online help function let users retrieve LINNET OPAC more efficiently. Second, several corrections of retrieval software will decrease the search failure rate. Third, system offers right truncation by default to every search term. This methods will increase success rate but should considered carefully. By a n.0, pplying this method, the number of hit can be overnumbered, and system overhead can be occurred. Fourth, system offers special boolean operator by default to every keyword retrieval when user enters more than two words at a time. Fifth, system assists searchers to overcome the wrong typing of selecting key by automatic korean/english mode change.

• 한국통신학회논문지
• /
• 제32권3C호
• /
• pp.297-305
• /
• 2007

본 논문에서는 주요 영화사들로 구성된 DCI(Digital Cinema Initiatives)에 의해 디지털 시네마를 위한 영상 압축 표준으로 제정된 Motion JPEG2000 부호화기를 FPGA를 타겟으로 구현하였다. JPEG2000의 주요 구성요소인 리프팅-기반의 DWT(Discrete Wavelet Transform)와 EBCOT(Embedded Block Coding with Optimized Truncation)의 Tier 1을 하드웨어로 구현하였고, Tier 2과정은 소프트웨어로 구현하였다. 디지털 시네마를 위해 입력 영상의 크기(tile size)는 최대 $1024\times1024$까지의 고해상도를 지원할 수 있도록 하였고, 실시간성을 보장하기 위해 3개의 엔트로피 부호화기를 사용하였다. Verilog-HDL을 이용하여 하드웨어로 구현했을 경우 Altera사의 Stratix EP1S80에서 32,470 LE (logic element)에 해당하는 자원을 사용하면서 FPGA에 사상되었고, 150Mhz의 주파수에서 안정적으로 동작하였다.

• Nuclear Engineering and Technology
• /
• 제20권3호
• /
• pp.179-188
• /
• 1988

최근 개발된 유한차분법의 하나인 선형특성 (LC) 법을 절단오차의 분석을 통하여 계단형 차분 (SD)법, 다이아몬드형차분 (DD)법, 그리고 계단형특성 (SC) 법과 비교했다. 제시된 4가지 방법들이 선속 계산문제, 유효증배계수 계산문제, 그리고 임계평판 두께 계산문제에 적용되었으며, 그때 계산된 결과들은 몇몇의 절단오차 측정 기준들에 의해 평가되어졌다. 본 연구의 주요 결론으로, 모든 경우에 있어서 어느 정도 기대했던 바와 같이 선형특성법이 가장 우수하다는 것이 밝혀졌으며, 특히, 선형특성법은 유효증배계수와 임계평판두께 같은 적분 인자들을 정확하게 계산하는데, 이는 선형특성법이 다른 방법들에 비해 오차소거(Error Cancellation)작용이 효과적으로 일어나기 때문으로 밝혀졌다.