• Korean Institute of Interior Design Journal
• /
• no.27
• /
• pp.162-167
• /
• 2001

The true space is the physical world affected a gravity but the cyber space is the world that rise above physical status and show developed space. This study shows that the factors of objective valuation and the indicators for the behavior analysis. It is established that the structural design indicators using the simulation have 4 steps; The indicator of complex space, the diagram of cognitive image, is the analysis of emotion and stimulation, and the dependent variables. Moreover the indicator of complex space is illustrated the connection degree, the symmetry, the axis of sight, and the degree of space division. For the effective analysis, the simulation is to be made matched with the true environment. Thus the simulation has the capability of the objective and correct more than those of true architectural environment. And it could establish immediately the experimental data and response.

• Annual Conference of KIPS
• /
• 2016.04a
• /
• pp.283-285
• /
• 2016

최근 정보통신 기술의 발전과 함께 M2M(Machine-to-Machine) 산업분야의 시스템이 다기능 고성능화되고 있으며 IoT(Internet of Things), IoE(Internet of Everything)기술 등과 함께 많은 발전해가고 있다[1]. 가장 오래 된 정보통신 기술의 근간인 웹 애플리케이션은 점점 발전하고 고도화 되어가고 있으며 이러한 웹 애플리케이션을 해킹하는 기술도 다양한 관점에서 발전하고 있다. 웹 애플리케이션을 구성하는데 필수적인 파일인 TTF(True Type Font)파일에 대한 보안적 관심이 필요하다. TTF파일을 외부에서 받아옴으로서 웹 애플리케이션에 적용시키는 방식을 사용할 때, 다른 서버에서 URL을 통해 받아오는 TTF파일에 대해 보안적 검사가 제대로 실행되지 않는다. 본 논문에서는 TTF파일의 감염과 그 파일에 대한 대응 방법을 제안하고자 한다.

• Structural Engineering and Mechanics
• /
• v.55 no.4
• /
• pp.839-856
• /
• 2015

A multi-contact tooth meshing model for helical gear pairs considering bearing and shaft deformations is proposed. First, to easily incorporate into the system model, the complicated Harris' bearing force-displacement relationship is simplified applying a linear least square curve fit. Then, effects of shaft and bearing flexibilities on the helical gear meshing behavior are implemented through transformation matrices which contain the helical gear orientation and spatial displacement under loads. Finally, true contact lines between conjugated teeth are approximated applying a modified meshing equation that includes the influence of tooth flank displacement on the tooth contact induced by shaft and bearing displacements. Based on the model, the bearing's force-displacement relation is examined, and the effects of shaft deformation and external load on the multi-contact tooth mesh load distribution are also analyzed. The advantage of this work is, unlike previous works to search true contact lines through time-consuming iterative strategy, to determine true contact lines between conjugated teeth directly with presentation of deformations of bearings and shafts.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.885-887
• /
• 2003

The purpose of this investigation is to generate true orthophotos from high resolution satellite images. The major works of this research include 4 parts: (1) determination of orientation parameters, (2) generating traditional orthophotos using terrain model, (3) relief correction for buildings, and (4) process for hidden areas. To determine the position of satellites, we correct the onboard orientation parameters to fine tune the orbit. In the generation of traditional orthophotos, we employ orientation parameters and digital terrain model(DTM) to rectify tilt displacements and relief displacements for terrain. We, then, compute relief displacements for buildings with digital building model (DBM). To avoid double mapping, we detect hidden areas. Due to the satellite’s small field of view, an efficient method for the detection of hidden areas and building rectification will be proposed in this paper. Test areas cover the city of Kaohsiung in southern Taiwan. Test images are from the QuickBird satellite.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.34-38
• /
• 2011

Purpose: The SUV is a widely used semi-quantitative index in PET for the estimation of radio-tracer accumulation in VOI. In this study, SUVs from three different PET/CT scanners were assessed, and differences between SUVs were evaluated. Materials and Methods: The PET/CT scanners which were assessed in this study were GEMINI, GEMINI TF 64 (Philips) and Biograph True Point True V 40 (Siemens). The NEMA PET phantom (Data Spectrum Corp., USA) was used to evaluate SUVs. The NEMA PET phantom has6.8 kg weight and three hot inserts. Two different activity distributions for the background and inserts were tested. The activity ratio were 3.7:3.7:7.4:11.1 MBq (1:1:2:3) and 1.85:7.4:9.25:11.1MBq (1:4:5:6) for each of background, insert 1, insert 2 and insert 3. Acquisition time was 2 minutes per bed position and NEMA PET phantom could be covered by two bed positions for all PET/CT scanners. The SUVs from each PET/CT scanner were compared with calculated true value. Results: For both activity ratios, all scanners showed similar results. The differences between each scanner were insignificant. Each scanner showed 91.2%, 85.9% and 87.2% of true SUV for GEMINI, GEMINI TF 64, Biograph True Point TrueV, respectively. Conclusion: For all scanners, SUVs were slightly lower than true value. However, the difference between scanners was insignificant. The SUVs from these scanners would be clinically meaningful if their consistent underestimation is kept in mind.

• Journal of KIISE:Software and Applications
• /
• v.33 no.5
• /
• pp.508-524
• /
• 2006

We present our experience of combining, in a realistic setting, a static analyzer with a statistical analysis. This combination is in order to reduce the inevitable false alarms from a domain-unaware static analyzer. Our analyzer named Airac(Array Index Range Analyzer for C) collects all the true buffer-overrun points in ANSI C programs. The soundness is maintained, and the analysis' cost-accuracy improvement is achieved by techniques that static analysis community has long accumulated. For still inevitable false alarms (e.g. Airac raised 970 buffer-overrun alarms in commercial C programs of 5.3 million lines and 737 among the 970 alarms were false), which are always apt for particular C programs, we use a statistical post analysis. The statistical analysis, given the analysis results (alarms), sifts out probable false alarms and prioritizes true alarms. It estimates the probability of each alarm being true. The probabilities are used in two ways: 1) only the alarms that have true-alarm probabilities higher than a threshold are reported to the user; 2) the alarms are sorted by the probability before reporting, so that the user can check highly probable errors first. In our experiments with Linux kernel sources, if we set the risk of missing true error is about 3 times greater than false alarming, 74.83% of false alarms could be filtered; only 15.17% of false alarms were mixed up until the user observes 50% of the true alarms.

• Journal of the Korea Convergence Society
• /
• v.11 no.2
• /
• pp.53-60
• /
• 2020

The purpose of this paper is to evaluate the image of the Styrofoam Wedge that can minimize the position change by supporting the wrist during the True PA and lateral examination of the wrist. In 50 people, the gap between the distal radius joint facet and the wrist bone was measured after the wrist True PA and lateral images were obtained using a general examination(vertical), tube angle(vertical:10°, lateral:20°) and Styrofoam Wedge(vertical). When joint spacing was measured in the True PA and lateral images of the wrist, general examination(5.54mm, 9.42mm), tube angle(2.05mm, 5.07mm) and Styrofoam Wedge(1.79mm, 5.46mm) were shown to be small. The smaller the joint spacing, the easier it is to observe that is open. Therefore, True PA and lateral imaging of the wrist Styrofoam Wedge can reduce the distortion of the image and thus acquire images of high diagnostic value. In addition, it may be possible to reduce the deviation caused by the change of patient's position during re-projection.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.6
• /
• pp.838-844
• /
• 2013

This study was conducted to evaluate chemical composition, nitrogen-corrected true metabolizable energy (TMEn) and true amino acids digestibility of corn distillers dried grains with solubles (DDGS) produced in China. Twenty five sources of corn DDGS was collected from 8 provinces of China. A precision-fed rooster assay was used to determine TMEn and amino acids digestibility with 35 adult cecectomized roosters, in which each DDGS sample was tube fed (30 g). The average content of ash, crude protein, total amino acid, ether extract, crude fiber and neutral detergent fiber were 4.81, 27.91, 22.51, 15.22, 6.35 and 37.58%, respectively. TMEn of DDGS ranged from 1,779 to 3,071 kcal/kg and averaged 2,517 kcal/kg. Coefficient of variation for non-amino acid crude protein, ether extract, crude fiber and TMEn were 55.0, 15.7, 15.9 and 17.1%, respectively. The average true amino acid digestibility was 77.32%. Stepwise regression analysis obtained the following equation: TMEn, kcal/kg = -2,995.6+0.88${\times}$gross energy+$49.63{\times}a^*$ (BIC = 248.8; RMSE = 190.8; p<0.01). Removing gross energy from the model obtained the following equation: TMEn, kcal/kg = 57.88${\times}$ether extracts+$87.62{\times}a^*$ (BIC = 254.3, RMSE = 223.5; p<0.01). No correlation was found between color scores and lysine true digestibility (p>0.05). These results suggest that corn DDGS produced in China has a large variation in chemical composition, and gross energy and $a^*$ value can be used to generate TMEn predict equation.

• Korean Journal of Poultry Science
• /
• v.11 no.2
• /
• pp.109-114
• /
• 1984

The experiment was made to study the effect of levels of metabolizable energy of basal diets on apparent metabolizable energy (AME) and true metabolizable energy (TME) values of corn and soybean meals. The test materials, corn and soybean meals, were substituted with basal diet at 50% and 30%, respectively. The excreta of fed md unfed birds were collected for 30 hours. The results obtained were as follows; 1. The AME values of corn were not significantly different among treatments (P＞0.05) except for 2400 Kcal/13% treatment, The AME values of soybean meals differed significantly between 2,400 Kcal/13% and 2,800 Kcal/15% or 3,000 Kcal/16%, but were not different between 2,400 Kcal/13% and 2,600 Kcal/14 % (probability at 5% level). 2. The energy levels of basal diets did not affect the AME values of corn and soybean meals (P＞0.05) except 2,400 Kcal/13% treatment. This fact indicates that it is not necessary to change energy levels of basal diet according to test materials. 3. That the values of standard error of soybean meals were higher than those of corn was resulted from its low level of substitution with basal diet. 4. The TME values of corn showed significant differences (P＜0.05) between 2,400Kcal/13% treatment and other treatments but those of soybean meals were not different among all treatments (P＞0.05). 5. The reason that the AME values of corn and soybean meals and the TME values of corn reduced significantly in 2,400 Kcal/13% could be explained by the effect of interaction among ingredients in the diet.

• Korean Journal of Forensic Psychology
• /
• v.11 no.2
• /
• pp.173-190
• /
• 2020

The purpose of this study is to verify whether it is possible for participants to discriminate between innocent and guilty suspects when they are exposed to criminal information utilizing an autobiographical implicit association test (aIAT). A total of 49 college students were randomly assigned to guilty group, innocent-aware group, or innocent-unaware group. Participants performed an aIAT to detect suspects after performing either mock crime or control task. It was verified that innocent suspect and guilty suspect exposed with crime information could be distinguished through D-score and reaction time, converted to symbolize strength of the association between guilty sentences, innocent sentences, and truth sentences. As a result of the analysis, guilty group showed significantly higher D-score than both innocent-aware group and innocent-unaware group. guilty group also showed faster response time in true-guilty condition than true-innocent condition. This shows that the association of true-guilty conditions is stronger than that of true-innocent conditions. On the other hand, the innocent-aware group showed a faster response time in the true-innocent condition than the true-guilty condition, and innocent-unaware group showed no significant difference between the two conditions. Through this, it was confirmed that innocent suspects exposed to criminal information can be discriminated according to the aIAT pattern, which has a faster reaction rate to the truth and innocence union than the guilty group. This study confirmed that suspects exposed to criminal information can be effectively discriminated using aIAT, and further suggests the usefulness and potential of aIAT in the field of lie detection.