• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.660-664
• /
• 2007

Korea High-speed Railway (HSR-350x) was developed by Korean government, several institutes, and related companies. HSR-350x was investigated its performance and tested at the high speed line. In 2004 December, HSR-350x was run over 350km/h and proved its running performance. And Korean Train Express (KTX) served the commercial traffic for 4 years. These high speed railways have 12 motors to transfer the traction effort or the braking force. To obtain the load of the transfer shaft, it is necessary to measure the transferred torque of the shaft. In this paper, authors propose the construction the measurement system fur monitoring the force transferred to the train from the motor The system was installed to the tripod shaft which is located between the reduction gears and it measures the mechanical load directly.

• Journal of Information Technology Services
• /
• v.16 no.3
• /
• pp.1-15
• /
• 2017

This study is aimed to find out which factors among firm-specific resources, industry-based competition, and institutional conditions affect strategies for Korean IT manufacturing companies when they expand their business overseas, especially to Vietnam in this study. Also, it attempts to reveal which strategies among cost reduction, mass production, and localization affect performance of overseas expansion. Based on Strategy Tripod Theory as an integrating point-of-view embracing resource-based view, industry-based view, and institution-based view, research model was developed and tested through the survey of 83 Korean IT manufacturing companies expanded their business to Vietnam. Research findings show that (1) communication competency, industry competitiveness, industry attractiveness, and regulation of partner country affect cost reduction strategy. (2) International experience, communication competency, international orientation, and competitiveness is significantly associated with mass production strategy. (3) And international experience, communication competency, and industry competitiveness affect localization. (4) Ultimately, mass production strategy and localization strategy significantly increase performance of expansion to Vietnam. The theoretical contribution of this study is to adopt an integrative approach based on strategy tripod theory. As practical implications, it suggests factors and strategies that IT manufacturing companies interested in expansion to Vietnam should consider. In sum, we believe this study can contribute to Korean IT manufacturing industry by suggesting key success factors and appropriate strategies for overseas expansion.

• Journal of Internet of Things and Convergence
• /
• v.4 no.1
• /
• pp.37-41
• /
• 2018

This paper examines smart warning triangles to prevent secondary accidents on roads. After a traffic accident on the road, a safety tripod must be installed to notify the accident. However, it can cause secondary accidents during warning triangle installation. To solve this problem, a smart warning triangle was proposed and implemented. A smart warning triangle acts as a triangle through a logo light projector when it detects an impact. Arduino functions as an impact detector and a logo light projector. The proposed smart safety tripod is expected to help prevent secondary accidents by acting as a safety tripod if the brightness of illumination is complemented.

• Journal of Ocean Engineering and Technology
• /
• v.38 no.2
• /
• pp.74-85
• /
• 2024

Offshore wind turbines are supported by various foundations, each with its considerations in design and construction. Gravity, monopile, and suction bucket foundations encounter geotechnical issues, while jacket and tripod foundations face fatigue problems. Considering this, a gravity foundation based on a steel skirt was developed, and a monopile foundation was analyzed for Pile-Soil Interaction using the p-y curve and 3D finite element method (3D FEM). In addition, for suction bucket foundations, the effects of lateral and vertical loads were analyzed using 3D FEM and centrifuge tests. Fatigue analysis for jacket and tripod foundations was conducted using a hotspot stress approach. Some hybrid foundations and shape optimization techniques that change the shape to complement the problems of each foundation described above were assessed. Hybrid foundations could increase lateral resistance compared to existing foundations because of the combined appendages, and optimization techniques could reduce costs by maximizing the efficiency of the structure or by reducing costs and weight. This paper presents the characteristics and research directions of the foundation through various studies on the foundation. In addition, the optimal design method is presented by explaining the problems of the foundation and suggesting ways to supplement them.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.218-226
• /
• 2020

An experimental study was conducted on baseline model updating and damage estimation techniques for the health monitoring of offshore wind turbine tripod substructures. First, a procedure for substructure health monitoring was proposed. An initial baseline model for a scaled model of a tripod substructure was established. A baseline model was updated based on the natural frequencies and the mode shapes measured in the healthy state. A training pattern was then generated using the updated baseline model, and the damage was estimated by inputting the modal parameters measured in the damaged state into the trained neural network. The baseline model could be updated reasonably using the effective fixity model. The damage tests were performed, and the damage locations could be estimated reasonably. In addition, the estimated damage severity also increased as the actual damage severity increased. On the other hand, when the damage severity was relatively small, the corresponding damage location was detected, but it was more difficult to identify than the other cases. Further studies on small damage estimation and stiffness reduction quantification will be needed before the presented method can be used effectively for the health monitoring of tripod substructures.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.125-132
• /
• 2019

This paper presents a seismic reliability analysis method for an offshore wind turbine with a twisted tripod support structure under earthquake loading. A three dimensional dynamic finite element model is proposed to consider the nonlinearity of the ground-pile interactions and the geometrical characteristics of the twisted tripod support structure where out-of-plane displacement occurs even under in-plane lateral loadings. For the evaluation of seismic reliability, the failure probability was calculated for the maximum horizontal displacement of the pile head, which is calculated from time history analysis using artificial earthquakes for the design return periods. The application of the subset simulation method using the Markov Chain Monte Carlo(MCMC) sampling is proposed for efficient reliability analysis considering the limit state equation evaluation by the nonlinear time history analysis. The proposed method can be applied to the reliability evaluation and design criteria development of the offshore wind turbine with twisted tripod support structure in which two dimensional models and static analysis can not produce accurate results.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.5
• /
• pp.1-12
• /
• 2023

This study evaluated the overturning stability of portable tripod ladders used for high-altitude work such as tree management and pruning work in landscaping construction and management. Portable tripod ladders, which are included in general mobile or portable ladders frequently used in industrial sites, are supported in a triangular support structure, not a 4-point support like common A-type Ladders. In addition, since the working height is more than twice that of a mobile or portable ladder, the possibility of an overturning accident that threatens the safety of workers with a fall accident is high. Therefore, based on the overturning stability test specified in ANSI-ASC A14.7 and EN 131-Part 7, which are related standards for about 130 types of portable tripod ladders sold and used in Korea. An equation to calculate each moment according to working height was derived. Then, each calculated moment was compared to evaluate the safety factor for overturning and stability. As a result of the overturning stability evaluation according to each standard, when the provisions of EN 131-Part 7 were applied, portable tripod ladders with 8 steps in the rear direction and 6 steps or more in the side direction were evaluated as unstable against overturning, but according to ANSI-ASC A14.7 regulations. It was evaluated that the stability against overturning was secured in all directions and number of steps.

• 한국전자현미경학회:학술대회논문집
• /
• 2001.05a
• /
• pp.53-57
• /
• 2001

• Journal of Korea Foundry Society
• /
• v.21 no.3
• /
• pp.187-191
• /
• 2001

가스분무장치를 이용하여 제조된 304 stainless steel 분말의 미세응고조직 특성을 투과전자현미경으로 관찰하였다. 분말이 sandwich 현상으로 존재하도록 구리로 전기도금한 후 tripod jig 를 이용하여 기계적 연마하여 TEM 시편을 제작하였다. 이 방법으로 제조된 TEM 시편은 넓은 지역에서 200KV 로 가속된 전자가 투과하기에 충분히 얇았으며, 작은 분말의 경우에는 분말 전체를 관찰할 수 있었다. 제한시야회절법(SADP)을 이용하여 100 ${\mu}m$ 이하 분말의 결정구조를 조사한 결과에 따르면 가스분무법으로 급냉응고된 대부분의 분말은 austenite 상으로 응고되었으며, 모든 austenite 분말은 크기에 관계없이 쌍정조직 (twinstructure)이 발견되었으며 그 밀도 역시 아주 높았다. 그러나 직경이 2 ${\mu}m$ 이하의 분말에서는 큰 과냉 (supercooling) 효과에 의하여 준결정상인 bcc 상으로 응고됨을 발견하였다.

• Journal of Yeungnam Medical Science
• /
• v.5 no.1
• /
• pp.85-92
• /
• 1988

To avoid external facial scar which resulted from ordinary infraorbital and lateral eyebrow incision in surgical treatment of zygomatic tripod fractures, the author used intraoral incision and K-wire fixation method in 37 selected patients. This method contraindicated for the patient with multiple comminuted zygomatic fracture, patient combined with hard palatal fracture, and patient combined with herniated orbital floor fracture. The advantages of this method are simple, no external facial scar, and operate under direct visual field. The postoperative results were satisfactory. Balanced facial symmetry and good cosmetic results were obtained.