• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.3
• /
• pp.192-199
• /
• 2022

In DC distribution systems, a TAB converter employing multiple transformers is one of the most widely used topologies due to its high power density, modularizability, and cost-effectiveness. However, the conventional control technique for a grid-connected mode in the TAB converter cannot maintain its reliability for an islanding mode under a blackout situation. In this paper, the islanding mode control technique is proposed to solve this issue. To verify the relative stability and dynamic characteristics of the control technique, small-signal models of both the grid connected and the islanding mode are derived. Based on the small-signal models, PI controllers are designed to provide suitable power control. The proposed control technique, the accuracy of small-signal models, and the performance of the controllers are verified by simulations and experiments with a 1-kW prototype TAB converter.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.615-621
• /
• 2023

In this study, flow analysis of single, double, and triple filter systems of cylindrical structures was performed to analyze the flow characteristics of each filter. As a result of the flow analysis of the filter system, the number of filters and the pressure drop rate tend to be proportional to each other. It was found that the area passing through the inside of the filter had almost the same pressure. The maximum pressure drop rate of the triple filter system was about 14.9% for the forward-flow and about 12.4% for the reverse-flow. It was determined that the performance of the filter was stable within 20% of the allowable pressure drop rate of the filter system, which is the standard presented to the Korea Water Technology Certification Institute(KWTCI). In the future, a study on the decompression characteristics of the filter system according to the effect of the arrangement interval and filter density of the triple filter will be conducted.

• Transactions of Materials Processing
• /
• v.29 no.1
• /
• pp.37-43
• /
• 2020

Increasing the critical current density of superconducting wire is one of the difficult challenges in the field of superconductivity. It is well known that the higher volume fraction of uniformly dispersed α-Ti is able to enhance the critical current density of superconducting material NbTi because α-Ti serves as a flux pinning center. The volume fraction of α-Ti highly depends on the grain size of NbTi because α-Ti precipitates at the grain boundaries or triple points. For this purpose, we investigated the effect of initial microstructures of NbTi obtained from hot rolling in various temperature conditions on the critical current density. In addition, subsequent heat treatment was assigned to precipitate α-Ti and groove rolling/cold drawing was adopted to produce a wire with a diameter of about 1.0 mm. It was observed that the band structure was formed after hot rolling at 500~600℃. It was also found that the volume fraction of α-Ti after hot rolling at 500~600℃ was higher and it led to the highest critical current density.

• Journal of the Korean Chemical Society
• /
• v.60 no.6
• /
• pp.410-414
• /
• 2016

The anharmonic frequency of a local OH stretching mode of a water monomer and dimer was calculated using various levels of density functional theory. The quantum chemical potential energy curves as a function of the OH bond distance were calculated, and they were fitted with the Morse potential function to analytically obtain the fundamental transition frequency. By comparing those values with the frequencies similarly calculated using an ab initio quantum chemical method, the coupled cluster theory including both single and double excitations with the perturbative inclusion of triple excitation in the complete basis limit, the accuracy of various density functional methods in the calculation of anharmonic vibration frequency of water molecules was assessed. For a water monomer, X3LYP and B3LYP methods give the best accuracy, whereas for a water dimer, B972, LCBLYP, ${\omega}B97X$, ${\omega}B97$ methods show the best performance.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.9
• /
• pp.4445-4452
• /
• 2012

Background: Prognosis of breast cancer depends on classic pathological factors and also tumor angiogenesis. This study aimed to evaluate the clinicopathological factors of breast cancer in a tertiary centre with a focus on the relationship between tumor angiogenesis and clinicopathological factors. Methods: Clinicopathological data were retrieved from the archived formal pathology reports for surgical specimens diagnosed as invasive ductal carcinoma, NOS. Microvessels were immunohistochemically stained with anti-CD34 antibody and quantified as microvessel density. Results: At least 50% of 94 cases of invasive breast ductal carcinoma in the study were advanced stage. The majority had poor prognosis factors such as tumor size larger than 50mm (48.9%), positive lymph node metastasis (60.6%), and tumor grade III (52.1%). Higher percentages of estrogen and progesterone receptor negative cases were recorded (46.8% and 46.8% respectively). Her-2 overexpression cases and triple negative breast cancers constituted 24.5% and 22.3% respectively. Significantly higher microvessel density was observed in the younger patient age group (p=0.012). There were no significant associations between microvessel density and other clinicopathological factors (p>0.05). Conclusions: Majority of the breast cancer patients of this institution had advanced stage disease with poorer prognostic factors as compared to other local and western studies. Breast cancer in younger patients might be more proangiogenic.

• The Korean Journal of Ecology
• /
• v.20 no.5
• /
• pp.355-365
• /
• 1997

Macrozoobenthic community structure was studied on the mud-tidalflat around Mokpo coastal area, Korea, from September 1995 to May 1996. Ten sampling stations were chosen along the 1km transect with a 100 m intervals. Triple macrozoobenthos sampling were conducted with a stainless box core sampler (size $13{\times}22{\times}30$ cm) at each station on the seasonal basis. A total of 119 species of macrobenthos was sampled with a mean density 2,357 $ind./m^2$ and biomass of 180. 94 $g/m^2$ during the study period. Of these species, there were 51 species of mollusce (43%), 36 of crustaceans (30%), 27 of polychaetes (23%). Molluscs were density-dominant faunal group with a mean density of 1,804 $ind./m^2$, comprising of 75% of the total density of the benthic animals. It was followed by polychaetes with 347 $ind./m^2$ (15% of the total density). Molluscs were biomass-dominant faunal group with a mean biomass of 147.51 $g/m^2$ (82% of the total biomass). The number of species, abundance and biomass showed increasing trends toward the lower intertidal stations from the higher stations. Major dominant species were Musculista senhousia (bivalve), Capitellidae spp. (polychaetes) with a density of 1,640 $ind./m^2$ and 179 $ind./m^2$ , respectively. The density of M. senhousia was more than 63% of the total density of benthic organism on the tidal area. Small gastropod Cerithideopsilla umumriensis was another dominant epifaunal species between st.1 and 2 with a mean density of 100 $ind./m^2$. Cluster analysis showed that the benthic community could be divided into three stational groups, that is, upper, middle and lower groups by the exposure duration.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.4
• /
• pp.505-508
• /
• 2012

A permanent magnet flux switching (PMFS) machine has a simple rotor, whilst both magnets and coils are set in the stator, resulting in easy removal of heat due to both copper loss and eddy current loss in magnets. However, the volume of magnets used in PMFS machines is usually larger than in conventional PM machines, and leakage flux does exist at the non-airgap side. To make full use of the magnets and gain higher power density, a novel 3-dimensional (3D) field PMFS machine is developed. It combines merits of the tubular linear machine, external-rotor rotary machine and axial-flux rotary machine, hence, offers high power density and peak torque capability, as well as efficient utility of magnets owing to the unique configuration of triple airgap fields.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.12
• /
• pp.1870-1877
• /
• 1990

The electromagnetic properties of P- and n-channel split drain magnetic sensitive MOSFET fabricated using 2\ulcorner design rules and CMOS process technology has been investigated. The achieved output voltage in the double drain MOSFET was 160mV at 10\ulcorner drain current and magnetic flux density of 10kG, and the sensitivity was 1.6x10**3 V/A\ulcornerG. A further higher sensitivity was obtained by introducing a third drain in the split region. In this case, the triple drain MOSFET showed a much higher sensitivity of 2x10**3 V/A\ulcornerG under the same condition. Also, the linearity of output voltage vs. magnetic flux density was excellent.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.51-56
• /
• 1995

Variation of sintered density of BaTiO3 powder calcined at 120$0^{\circ}C$ and 135$0^{\circ}C$ was investigated with respect to the grain growth behavior. It was found that BaTiO3 powder, which was calcined at 120$0^{\circ}C$, showed abnormal grain growth behavior during sintering process. At initial stage of sintering process, the densification rate of specimen was accelerated with rapid grain growth caused by the abnormal grain growth. But with the increase of sintering time, abnormally grown grain met each other and the density of specimen decreased drastically due to coalescence of pores located in triple junction. On the contrary, BaTiO3 powder calcined at 135$0^{\circ}C$ showed normal grain growth behavior and gradually densified with the increase of sintering time.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.238-239
• /
• 2013

We studied the thermal and electron properties of covalent one-dimensional (1D) monatomic linear chains of carbon, particularly carbyne. We found the ${\alpha}$-carbyne (Polyyne, alternating single and triple C-C bond co-existing) is more stable than ${\beta}$-carbyne (Equally-spaced based on C-C double bond) energetically. As investigation of electron density of states (EDOS), polyyne and cumulene had different electronic characteristic, which corresponding metallic and semiconducting respectively. We also calculate the phonon dispersion, phonon density of states (PDOS) and phonon transmission of carbynes.