• 수산해양교육연구
• /
• 제27권6호
• /
• pp.1865-1871
• /
• 2015

Ship's trim is the one of the most important factor for safety at the sea. Turning circle test and Z-test were carried out to find the effect of ship's trim and draft changes. The results are as follows. 1. If the ship's draft and trim became large, turning circle would be wide. 2. If the ship's draft and trim became large, ship's drift angle would be small. Small drift angle made wide turning circle. 3. Trim by the head made slow ship's final speed when turning circle test. 4. By Z-test, the deeper draft and trim by the stern made small OSA. Small OSA means strong ship's stability. 5. Totally 2nd OSA is smaller than 1st OSA on Z-test. 6. There were small differences of 2nd OSA in trim by the stern, but there were large OSA in trim by the head. 7. The larger trim by the stern, the smaller OSW. The small OSW means better ship's stability and maneuverability.

• 한국유체기계학회 논문집
• /
• 제16권1호
• /
• pp.32-39
• /
• 2013

The multi-stage control valve is one of the devices which controls cavitation and high pressure drop. To attain the high pressure drop, the conventional control valves adopted the multi-stage trim to avoid the occurrence of local cavitation in valves. This work studied the effect of divergence angle on the characteristics of multi-stage trim. Pressure drop and flow characteristics was calculated for the 1 passage of multi-staged trim by using the FLUENT 6.3.26. The result showed that the pressure drop is significantly influenced by the divergence angle of multi-stage trim. In addition, the pressure drop increased consistently as the Reynolds number and divergence angle increases.

• 소성∙가공
• /
• 제24권2호
• /
• pp.77-82
• /
• 2015

By investigating the practical use of trim punch configurations for shearing of vehicle panels, the current study first reviews the shearing angle as part of the shearing die design. Based on this review, four different types of trim punch shapes (i.e., horizontal, slope, convex, and concave type) and shearing angles(i.e., 0.76°, 1.53°, 2.29°, 3.05°, 3.81°) were investigated. In order to conduct shearing experiments, four types of trim punch dies were made. The four trim punch dies were tested under various conditions. The experiments used the four trim punch shapes and the five shearing angles. The shearing force varied by shape and decreased from horizontal, slope, convex, to concave for the same shearing angle. The magnitude of shearing force showed differences between the convex and the concave shapes due to the influence of constrained shearing versus free shearing. The test results showed that compared to the horizontal trim punch shearing force, the decrease of the slope, convex, and concave shearing forces were 22.6% to 60.4%. Based on the results, a pad pressure of over 30% is suggested when designing a shearing die.

• 한국항해항만학회지
• /
• 제42권4호
• /
• pp.283-290
• /
• 2018

선박사고는 환경적인 요인으로 인해 경사가 항상 존재한다. 선박의 경사는 선내 재실자의 피난 이동속도뿐만 아니라 선내 화재성장에도 영향을 미치기 때문에 화재해석 시 경사조건을 고려하여 위험분석을 할 필요가 있다. 이에 이 연구에서는 FLUENT를 이용하여 선박의 횡경사와 종경사 변화에 따라 산정된 온도결과 값에 의해 화재에 미치는 영향을 분석하였다. 화원의 위치를 기준으로 횡경사가 $-10^{\circ}$일 때 37초, 종경사는 $-10^{\circ}$일 때 36초 이내에 피난을 해야 하는 반면, 횡경사가 $+10^{\circ}$, 종경사가 $+10^{\circ}$인 경우 피난에 영향을 미치지 않을 것으로 예측되었다. 이와 같은 결과를 바탕으로, 선박화재 시 화재발생위치를 기준으로 횡경사와 종경사를 고려하여 피난유도 및 대책을 마련해야함을 확인하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.62-67
• /
• 2004

Many ships in voyage experience weight and buoyancy distribution change by various reasons such as change of sea water density and waves, weather condition, and consumption of fuel, provisions, etc . The weight and buoyancy distribution change can bring the ships out of allowable trim, heeling angle. In these case, the ships should adjust trim and heeling angle by shifting of liquid cargo or ballasting, deballasting of ballast tanks for recovery of initial state or for a stable voyage. But, if the adjustment is performed incorrectly, ship's safety such as longitudinal strength, intact stability, propeller immersion, wide visibility, minimum forward draft cannot be secured correctly. So it is required that the adjustment of trim and heeling angle should be planned not by human operators but by optimization computer algorithm. To make an optimized plan to adjust trim and heeling angle guaranteeing the ship's safety and quickness of process, Uk! combined mechanical analysis and optimization algorithm. The candidate algorithms for the study were heuristic algorithm, meta-heuristic algorithm and uninformed searching algorithm. These are widely used in various kinds of optimization problems. Among them, heuristic algorithm $A^\ast$ was chosen for its optimality. The $A^\ast$ algorithm is then applied for the study. Three core elements of $A^\ast$ Algorithm consists of node, operator, evaluation function were modified and redefined. And we analyzed the $A^\ast$ algorithm by considering cooperation with loading instrument installed in most ships. Finally, the algorithm has been applied to tanker ship's various conditions such as Normal Ballast Condition, Homo Design Condition, Alternate Loading Condition, Also the test results are compared and discussed to confirm the efficiency and the usefulness of the methodology developed the system.

• 대한조선학회논문집
• /
• 제46권4호
• /
• pp.391-397
• /
• 2009

In this paper, longitudinal static stability is investigated, which is an essential requirement for the safety and the performance of the human powered hydrofoil boat (HPHB). In case a disturbance changes the trim angle of the boat, the derivative of the moment about the center of gravity must be negative in order to make the boat to be stable. The equation to evaluate the longitudinal static stability of the EPISODE, a HPHB of Chungnam National University with a height controlling system(HCS) is derived. From the derivative it is confirmed that a longitudinal and vertical position of the center of gravity is important for a HPHB. The range of a trim angle while the boat is foil-born was found with a HCS under the condition of mechanical restraint. And it is confirmed that the longitudinal static stability is satisfied for EPISODE in certain range of a trim angle. It is also shown that the longitudinal static stability and a range of the trim angle can be determined from the principal dimensions of a HPHB, therefore, it can be applied from the stage of the conceptual design of HPHB.

• 대한조선학회논문집
• /
• 제36권4호
• /
• pp.56-63
• /
• 1999

47.7m급 쌍동선의 1/21.5 축척 모형선으로 예인수조에서 저항 및 내항성능 시험을 수행하였다. 저항 시험은 선미트림탭을 부착하여 트림탭각의 변화에 따른 트림 및 저항변화를 조사하여 트림 탭이 없는 경우와 비교하고 그 영향을 조사하였다. 해상상태 3,4 및 5에서 3가지 실선속력에 대해서 상하 및 종운동을 계측하였으며 갑판위 5점에서 수직가속도도 계측하였다. 측정한 가속도 값은 ISO 2631/3의 규정과 비교하여 설계선형의 우수함을 보였다.

• 해양환경안전학회지
• /
• 제27권5호
• /
• pp.656-665
• /
• 2021

본 연구에서는 Froude 수 1.0, 길이 약 10 m 급 소형 고속선의 저항성능과 승선감을 향상시키기 위해 선미 끝단에 트림 탭을 부착하여 항주자세를 제어하였고, 트림 탭의 제원에 따른 성능을 확인하기 위해 CFD 해석을 수행하였다. 먼저 선행 연구로부터 수치해석이 수행되는 스케일에 따라 결과에 차이가 있는 것이 확인되었고, 이를 피하고자 실선 스케일에서의 해석을 수행하였다. 부착된 트림 탭의 코드 길이는 L_PP의 0.5, 1.0, 1.5 %였으며, 선저 면과의 각도는 5° 간격으로 변화를 주었다. 트림 탭은 선박의 선미트림과 부상량을 감소시키는 효과가 있었으며, 이 효과는 트림 탭의 선저 면과의 각도가 클수록, 코드 길이가 길수록 증가하였다. 이로 인해 압력저항은 감소하고 전단저항은 증가하였으며, 두 성분의 변화량에 따라 전 저항 저감율이 결정되었다. 결과로부터 대상 선박의 최적 항주자세는 약 1.5°의 선미트림으로 특정되었고, 이때 저항성능은 약 27 % 개선되었다.

• 한국항공우주학회지
• /
• 제39권6호
• /
• pp.487-497
• /
• 2011

자동회전 상태로 속도 증가 시 로터 속도의 변화와 피치 범위를 조사하기 위하여 수치 해석을 수행하였다. 정상 자동회전 상태를 구하기 위하여 과도모사법(Transient Simulation Method:TSM)을 사용하였다. 풍속의 증가에 대응하기 위하여 로터 블레이드를 2차원 압축성 Navier-Stokes 솔버로 해석하여 공력계수를 계산하였고 이를 과도모사법에 사용하였으며 유도 속도장 변화를 모사하기 위하여 Pitt/Peters 유도속도 이론을 적용하였다. 설정된 토크 평형 조건에서 풍속, 샤프트각, 피치각의 조합을 출력하여 로터의 회전속도와 변수의 범위를 조사하였다. 깃 끝 마하수의 변화에 따른 로터 회전속도의 변화를 살펴보았고 샤프트각의 감소에 따른 피치각의 트림 범위를 고찰하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.153-158
• /
• 1992

The purpose of this paper is to calculate the dynamic derivatives of single rotor Helicopter in forward flight. From trim condition, the equation of motion is derived, and we can calculate the dynamic dervatives. The results were compared with flight test data. The phase angle and stick displacement are obtained and compared at the trim condition.