• 제목/요약/키워드: Triacetin

검색결과 22건 처리시간 0.019초

탄소복합필터의 triacetin 함량 분석 (Determination of Triacetin Contents in the Activated Carbon Filter)

  • 김수호;고동균;김정열;이동욱;신창호;김종열
    • 한국연초학회지
    • /
    • 제27권1호
    • /
    • pp.68-74
    • /
    • 2005
  • Glycerol triacetate(triacetin) is the currently used common plasticizer in the making filters from cellulose acetate tow. For the mono acetate filter, the determination of triacetin contents is already established by CORESTA recommended method (No. 59). But unfortunately, the analytical method of triacetin in the activated carbon filter have not reported so far. In this study, it was established the analytical method of carbon filter's triacetin contents at various extraction conditions, bath ratio and internal standard materials. The confidential level appeared above $95\%$ when the extraction time, ISTD material and bath ratio was 3 hours, tripropionin and below 500 mg activated carbon / 50 $m\ell$ ethanol, respectively. Also, in the distribution of triacetin with filter materials in activated carbon filters, the triacetin amount was the most contained in activated carbon. Therefore, this method can be applied to the determination of triacetin contents in the activated carbon filter.

활성탄과 가소제가 탄소복합필터의 경도에 미치는 영향 (Effect of Triacetin and Activated Carbon on the Hardness of Cellulose Acetate Filter containing Activated Carbon)

  • 신창호;김종열;김정열;김영호;이영택
    • 한국연초학회지
    • /
    • 제22권2호
    • /
    • pp.157-163
    • /
    • 2000
  • Filter hardness is important to filter and cigarette manufactures because it is directly related to the ability of a plugmaker during making filter and to the acceptability of the filter by the consumer. In general, glycerol triacetate(Triacetin, TA) is the currently used common plasticizer in making filters from cellulose acetate tow and the effect of triacetin on hardness of filter which is made of mono cellulose acetate tow was well known. But unfortunately, the effect of triacetin on the hardness of cellulose acetate filter containing ativated carbon(carbon filter) was not reported so far. In this study, we manufactured filters with various carbon content at different triacetin concentrations and then analyzed the filter hardness and pressure drop. Filter hardness was directly increased with triacetin concentration but pressure drop was not affected and the effect of carbon content on filter hardness was smaller than that of triacetin concentration. However, pressure drop was directly increased with carbon content.

  • PDF

친환경 안경테 판재의 심입 가공성 향상을 위한 고비열 가소제 혼입에 관한 연구 (Study on the Eco-friend Frame Sheet with Improved Glasses Temple's Insertion-processibility by Blending Plasticizer of High Specific Heat)

  • 서영민;이해성;이성준;정상원;김현철;김은주;고영준;최진현;이세근
    • 한국안광학회지
    • /
    • 제18권1호
    • /
    • pp.11-17
    • /
    • 2013
  • 목적: 본 연구는 cellulose acetate/poly ethylene glycol(CA/PEG) 안경테용 판재의 심입가공성을 향상시키기 위하여 심입가공온도 영역에서 비교적 높은 비열을 갖는 친환경 가소제인 triacetin을 2차 가소제로 도입함으로써 가공 효율이 향상 된 친환경 안경테 판재를 제조하는데 목적이 있다. 방법: 전체 가소제의 양을 CA 대비 30 wt%로 고정하고 1차 가소제인 PEG와 2차 가소제인 triacetin의 함량을 조절하여 제조된 CA/PEG/triacetin 조성물의 비열 및 열적특성을 분석하고, 다양한 기계적 물성과 광학적 특성의 비교분석을 통해 우수한 가공성을 갖는 안경테 소재를 위한 최적의 가소제 조성을 결정하였다. 결과: Triacetin 도입을 통해 CA 판재의 비열 상승을 확인하였으며, triacetin 함량비가 증가할수록 유리전이온도(Tg)가 낮아지고 심입가공성의 척도가 되는 감온속도의 감소를 확인하였다. 또한 기존의 CA/PEG 안경테 소재와 비교 시 우수한 광택특성 및 경도를 확인하였으며, 동등수준 이상의 기계적 물성을 보임을 확인하였다. 결론: PEG/triacetin의 투입비율을 조절하여 심입가공성을 향상시키고, 안경테 판재로 사용되기 적합한 물성 및 특유의 광택과 우수한 심미성을 만족하는 CA 판재를 제조할 수 있다.

Triacetin이 탄소복합 필터의 연기성분 흡착능에 미치는 영향

  • 김정열;신창호;김종열
    • 한국연초학회지
    • /
    • 제20권2호
    • /
    • pp.205-209
    • /
    • 1998
  • This study was conducted to evaluate the effect of triacetin(TA) treatment during manufacturing carbon dual filter for the adsorption of cigarette smoke components by activated carbons. The measurements were carried out by separation of activated carbon from carbon dual filter, and the specific surface area analyzed. The specific surface area of activated carbon from the domestic cigarette filter and from the foreign cigarette filter by degassing at 9$0^{\circ}C$ was 163$\pm$32$m^2$/g, and 16.6$\pm$1.9$m^2$/g, respectively. Those values were very lower than that of degassing at 35$0^{\circ}C$ (Domestic brand: 952$\pm$30$m^2$/g, and Foreign brand: 847$\pm$73$m^2$/g). By comparing the adsorption capacity of acetone and benzene with and without triacetin treated activated carbon, there was a 20% reduction of adsorption capacity by 5% triacetin treatment. Also, from the cilia toxicity test with carbon dual filter treated 0 % TA and 8 % TA, the cilia survival time was 706$\pm$74sec. and 603$\pm$64sec. for 0% TA and 8% TA, respectively. The delivery rate of vapour phase of cigarette smoke, which consists of main components of cilia toxicity, was higher at 8% TA filter than 0 % TA filter. Our results indicate that the treated TA covered the micro-pore of activated carbon, and then reduced specific surface area, finally, decreased the adsorption of vapour phase from cigarette smoke.

  • PDF

PEG를 가소제로 사용한 장용성 연질캡슐의 코팅 품질 특성 (Quality Properties of Enteric-Coated Soft Capsule Using PEG as a Plasticizer)

  • 양주환;한준택;오인호;박금덕
    • 한국식품영양과학회지
    • /
    • 제44권2호
    • /
    • pp.260-267
    • /
    • 2015
  • 본 연구에서는 장용성 연질캡슐 코팅가소제로서 PEG(polyethylene glycol)의 활용가능성에 대하여 알아보고자 PEG의 분자량 및 첨가 농도에 따른 코팅 품질을 확인하였으며, 기존에 보고된 가소제인 AMG(acetylated monoglyceride)와 triacetin을 사용하여 코팅된 장용성 연질캡슐의 품질 특성을 비교하였다. PEG 분자량(400, 4,000, 6,000)에 따른 코팅 품질에는 큰 차이가 없었으나 PEG 첨가 농도의 경우 고형분 대비 5% PEG를 사용한 코팅에서는 연질캡슐 피막 접착부에서 코팅 필름 갈라짐이 발생하였으며, PEG 첨가량이 낮을수록 인공장액에서의 붕해시간이 연장되고 백색도가 증가하는 결과를 나타내었다. 용출시험에서 용출의 초기 구간(30~90분)에서는 PEG의 용출 속도가 상대적으로 빠른 모습을 나타내었으며, PEG, AMG 및 triacetin 간의 유의적 차이가 일부 시점에서 관찰되었으나 전체적인 용출 양상은 큰 차이를 보이지 않았다. 또한 PEG 코팅에 비해 AMG와 triacetin 코팅의 경우 백색도가 유의적으로 높았고 가속조건인 고온다습한 환경에서 2개월간 보관 후에 코팅 필름이 갈라졌으며, 붕해시험에서 부적합한 결과를 확인하였다. 결론적으로 우수한 물리 화학적 특성으로 의약품 등에 널리 사용되는 첨가제인 PEG는 장용성 연질캡슐 코팅 가소제로서 활용가능성이 충분하다고 판단하였다.

Triacetin 함량에 따른 담배필터의 이화학적 특성에 관한 연구 (Study on Some Physico-chemical Properties of Cigarette Filter Rods by Triacetin Content)

  • 김종열;신창호;김정열;김영호;이근회
    • 한국연초학회지
    • /
    • 제19권2호
    • /
    • pp.129-135
    • /
    • 1997
  • This study was carried out to investigate the influence of triacetin(TA) on some phisico-chemical properties of cigarette filter rods. To find the effect of TA on physical properties, we made six kinds of filters varying the TA levels(0%, 2%, 4%, 6%, 8%, 10%) and measured the hardness, resilience and roundness. The hardness of filter rods was increased from 83.2% to 94.6% with increasing the TA level hut the roundness was not affected by TA levels. After manufacturing the cigarette with the filters, we have analysed the delivery amount of phenol and TA with the content of TA. The amount of phenol was decreased from 20.6$\mu\textrm{g}$/cig. to 12.0 $\mu\textrm{g}$/cig. with increasing the TA level of the filters. The decreasing of phenol amount was thought to be caused by solution effect. Also the TA delivery of TPM was increased from 0% to 5% of TPM with increasing the amount of TA. We have found the interesting phenomena that ventilation rate was also decreasing up to 6oye with increasing TA. It seemed to be due to the encapsulated pressure drop and the reduction of the plugwrap porosity which also caused by the smear with TA on the surface of plugwrap. From this results, we could find that not only the hardness, resilience and ventilation rate but also the contents of phenol and TA in cigarette smoke was affected by the TA levels on the cigarette filter rods.

  • PDF

서방출성 리오겔 연고의 물리적성질과 방출특성 (Physical Properties and Release Characterization of Sustained Release Lyogel Ointment)

  • 김미옥;신영희;김대덕;이치호
    • Journal of Pharmaceutical Investigation
    • /
    • 제28권1호
    • /
    • pp.51-57
    • /
    • 1998
  • Tetracycline lyogel ointment consisting of hydroxy ethyl cellulose(HEC) in glycerin and Eudragit RS 100 in triacetin were prepared and then release characteristic were investigated. The physical properties of lyogel ointment such as viscosity, particle size and microscopic structures were also evaluated. The microscopic structures showed that lyogel particles containing drug were dispersed in the triactin solution. The release rate of drug from lyogel ointment as a function of HEC was not changed. However the release rate was significantly decresed when the amount of Eudragit RS 100 and triacetin in lyogel ointment was increased. The viscosity and weight fraction in external phase of lyogel ointment influenced the release rate. The current studies suggest that the release rate of drug can be controlled by changing of lyogel ointment compositions.

  • PDF

고압에서 알킬카보네이트와 트리아세틴의 이산화탄소 용해도 측정 (Solubility Measurement of Carbon Dioxide in Alkylcarbonates and Triacetin at High Pressure)

  • 김지원;홍원희;홍연기
    • 청정기술
    • /
    • 제21권2호
    • /
    • pp.124-129
    • /
    • 2015
  • 본 연구에서는 5~30 bar의 이산화탄소에 대한 DMPEG250 (dimethyl ether of polyethylene glycol), DEC (diethyl carbonate), DMC (dimethyl carbonate), 그리고 TAT (triacetin)의 용해도를 측정하기 위해 일정 부피법에 따른 용해도 측정 장치를 사용하였다. 이들에 대한 이산화탄소 용해도는 측정된 부피와 압력을 Peng-Robinson 방정식에 대입하여 얻은 이산화탄소의 몰수로부터 얻어졌다. 이산화탄소에 대한 물리 흡수제의 용해도는 같은 온도에 대해 DMPEG250 > TAT > DEC > DMC 순으로 나타났다. DMPEG250에 DEC를 혼합한 물리 흡수제를 사용할 경우 이산화탄소에 대한 용해도는 DMPEG250 단독에 의한 경우보다 높은 값을 가지는 것으로 확인되었다. 그러므로 DEC가 혼합된 DMPEG250/DEC 혼합 물리 흡수제는 기존의 DMPEG250이 가지는 높은 비용을 절감할 수 있을 뿐 아니라 용해도 향상까지 거둘 수 있어 향후 연소 후 이산화탄소 포집 공정에 효과적인 적용을 기대할 수 있다.

포갑 내에서 L-menthol의 이동과 연중 이행 효과에 관한 연구 (Study of the Migration Rate of L-menthol into Cigarette Pack and Delivery Rate to Cigarette Smoke)

  • 김병구;김시몽;양범호;제병권;이규서
    • 한국연초학회지
    • /
    • 제24권1호
    • /
    • pp.46-52
    • /
    • 2002
  • This study was carried out to investigate the transfer rate of I-menthol constituent into cigarette case and delivery rate to cigarette smoke. Test sample was used a light-type standard brand cigarette made in Korea. I-Menthol contents was measured according to A.O.A.C(1990) method by G.C and smoking conditions was a puff volume of 35$m\ell$ and 2.0s duration, taken once per minute to filter tipping paper plus 3mmwith 20 cigarettes. Migration rate of menthol into cigarette case had an interrelation with triacetin contents into filter and 6% triacetin level was most suitable. I-Menthol transferred to filter part from tobacco sheet by 20.2% in one month after cigarette manufacture, and the transfer was continued subsequently. Maximum menthol transfer in five months was 4.1% to foils and other packing materials and the loss outside of cigarette pack was also 3.9% below. The migration balance of menthol into cigarette pack and the delivery to cigarette smoke were the optimum condition when menthol was added at the ration of 30% in filter to 70% in the other parts into cigarette.