• Journal of Korean Society on Water Environment
• /
• v.33 no.6
• /
• pp.715-721
• /
• 2017

Tree box filters, an example of bioretention systems, were compacted and versatile urban stormwater low impact development technique which allowed volume and water quality treatment performance to be adjusted based on the hydrologic, runoff quality and catchment characteristics. In this study, the overall performance of a 6 year-old tree box filter receiving parking lot stormwater runoff was evaluated. Hydrologic and hydraulic factors affecting the treatment performance of the tree box filter were also identified and investigated. Based on the results, the increase in rainfall depth caused a decrease in hydrologic and hydraulic performance of the tree box filter including volume, average flow, and peak flow reduction (r = -0.53 to -0.59; p<0.01). TSS, organics, nutrients, and total and soluble heavy metals constituents were significantly reduced by the system through media filtration, adsorption, infiltration, and evapotranspiration mechanisms employed in the tree box filter (p<0.001). This significant pollutant reduction by the tree box filter was also found to have been caused by hydrologic and hydraulic factors including volume, average flow, peak flow, hydraulic retention time (HRT) and runoff duration. These findings were especially useful in applying similarly designed tree box filter by considering tree box filter surface area to catchment area of less than 1 %.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.12 no.20
• /
• pp.1-24
• /
• 1989

This paper takes aim at the reliability evaluation by application of Fault Tree Analysis and its computerization. FTA is one of the methods for evaluation of system reliability and safety analysis. The important characteristic of this paper is that computer program is written in the package program(dBaseIII+) by 16Bit/AT personal computer. The program consists of three program segments. (1) The minimal cut sets of the system fault tree are obtained by means of "Fault tree reduction algorithm" (2) The minimal path sets are obtained by inversion of the minimal cut sets determined from fault tree (3) The importance of the basic events which are presented in the minimal cut sets is obtained by means of structural importance analysis. In this paper, a Fault Tree Analysis is applied to a BAG FILTER which is a kind of dust collector.collector.

• Journal of Internet Computing and Services
• /
• v.12 no.6
• /
• pp.63-71
• /
• 2011

Cardiac disorder data are generally tested using the classifier and QRS-Complex and R-R interval which is used in this experiment are often extracted by ECG(Electrocardiogram) signals. The experimentation of ECG data with classifier is generally performed with SVM(Support Vector Machine) and MLP(Multilayer Perceptron) classifier, but this study experimented with Best-First Decision Tree(B-F Tree) derived from the Dicision Tree among Random Forest classifier algorithms to improve accuracy. To compare and analyze accuracy, experimentation of SVM, MLP, RBF(Radial Basic Function) Network and Decision Tree classifiers are performed and also compared the result of announced papers carried out under same interval and data. Comparing the accuracy of Random Forest classifier with above four ones, Random Forest is the best in accuracy. As though R-R interval was extracted using Band-pass filter in pre-processing of this experiment, in future, more filter study is needed to extract accurate interval.

• Spatial Information Research
• /
• v.8 no.1
• /
• pp.155-170
• /
• 2000

When we use R-Tree,a spatial index, to find objects matches some predicate, it often leads to an incorrect result of perform filtering step only with MBR. And , each candidates need to be inspected to conform if it really satisfies with given query, so called, 'refinement step'. In refinement step. we should perform disk I/O and expansive spatial operations which is the cause of increasing retrieval costs. Therefore, to minimize the number of candidate after filtering step, two-phase filtering methods were studied, but there was many problems such as inefficiency of filtering,maintenance of additional informations and reconstruction of data resulted from the loss of original information. So , in this paper, I propose an Extended R-Tree which provides ability to retrieve spatial objects only with some simple logical operations using Grid Table, truth table strong the information about the existence of spatial objects, in second filtering step. Consequently , this Extended R-Tree using Grid Filter has low cost of operation for filtering because of efficient second filtering step, and better filtering efficiency caused by high quality of approximation.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.184-187
• /
• 2002

Two-dimensional (2-D) X-ray computerized tomography (CT) equipments are widely used in industrial and medical fields, and nowadays studies on reconstruction algorithm for 3-D cone-beam acquisition systems are active for better utilization. The authors recent-By have proposed a fast reconstruction aigorithm using tree-structured filter bank for 2-D C1, and shown the algorithm is applicable to an approximate reconstruction of 3-D CT. For exact 3-D CT reconstruction, however, we have to backproject 1-D signal into 3-D space. This paper proposes a fast implementation method for this back-projection by use of tree-structured filter bank. and shows the proposed method works approximately 700 times faster than the direct one with almost same reconstruction image quality.

• The Korean Journal of Ecology
• /
• v.25 no.6
• /
• pp.399-403
• /
• 2002

Cellulose mass loss by cellulose filter papers was measured for 3 time (35 days, 70 days, 105 days) incubation during the growing season (from May to September 2002) with different tree density and after fertilization in a Japanese larch (Larix leptolepis) plantation. Cellulose mass loss rates were significantly different between tree density types and fertilization treatments during the study periods. After 105 day incubation of cellulose filter paper, cellulose mass loss rates were significantly higher in the low tree density (70.1 $\%$) than in the high tree density (49.9$\%$). Cellulose mass loss rates averaged 62.8$\%$ in the fertilization and 58.9% in the unfertilization treatments during the same periods. However, cellulose mass loss was not significantly different between the forest floor and the mineral soil layer except for 35 day incubation. The results indicate that cellulose decomposition rates are a useful index to express differences in organic matter decomposition activity in different tree density and after fertilizer treatments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.319-322
• /
• 2001

The proposed system was composed of pre-processor which was executing binary/high-pass filtering and post-processor which ranged from statistic data to prediction. In post-processor work, step one was filter process of image, step two was image recognition, and step three was destruction degree/time prediction. After these processing, we could predict image of the last destruction timestamp. This research was produced variation value according to growth of tree pattern. This result showed improved correction, when this research was applied image Processing. Pre-processing step of original image had good result binary work after high pass- filter execution. In the case of using partial discharge of the image, our research could predict the last destruction timestamp. By means of experimental data, this Prediction system was acquired ${\pm}$3.2% error range.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.89-98
• /
• 2000

This paper presents an active noise cancelling model using wavelet transform and subband filter banks based on adaptive filter. The analysis filter banks decompose input and error signals into QMF filter banks of lowpass and highpass bands. Each filter bank uses wavelet filter with dyadic tree structure. The decomposed input and error signals are iterated by adaptive filter coefficients of each subband using filtered-X LMS algorithm. The synthesis filter banks make output signal of wideband with perfect reconstruction to prepare adaptive filter output signals of each subband. The analysis and synthesis niter hants use conjugate quadrature filters for Pefect reconstruction. Also, The delayed LMS algorithm model for on-line identification of error path transfer characteristics is used gain and acoustic time delay factors. The proposed adaptive active noise cancelling modelis suggested by system retaining the computational and convergence speed advantage using wavelet subband filter banks.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.87-92
• /
• 2008

In this paper, certain scaling functions are generated using the dyadic subband tree structure and applied to a time-hopping, pulse position modulation, ultra-wideband (TH-PPM UWB) system. Scaling functions can be obtained by iterating a lowpass filter at each level using a critically sampled dyadic tree. The performance of the TH-PPM UWB system employing scaling functions as the mono-cycle waveform is evaluated through computer simulations in a Rayleigh fading environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.407-416
• /
• 2000

Adaptive digital filtering and noise cancelling technique using a tree structured filter bank are presented to reduce a undesirable aliasing due to the decimation of filtered output and improve the performance in terms of mean-square error and the convergence speed using a aliasing canceller. A signal is split into two subband by analysis filter bank and decimated by decimator and reconstructed by interpolation technique and synthesis filter bank. A variable step-size LMS algorithm is used to improve the convergence speed in case of existing the measurement noise in desired input of filter. It is shown by computer simulation that the proposed subband structure in this paper is superior to conventional subband filter structure in terms of mean-square error and convergence speed.