• 대한한의학원전학회지
• /
• 제35권2호
• /
• pp.17-32
• /
• 2022

Objectives : To overcome limitations of previous diagnostic systems and constitutional medicine by suggesting a new perspective of constitutional medicine and a system of Yin Yang and Five Phases that is applicable to many diseases untreatable by biomedicine. Methods : The Life Structure Diagram which shows the different distribution of Yin Yang and Five Phases according to constitution, reflects the non-local and simultaneous characteristics of Yin Yang and Five Phases. It overcomes previous diagnostic systems and constitutional medicine which were local and segmented. Each constitutional types were determined through their defining deep fractal pulse patterns, for which appropriate acupuncture methods and formulas were suggested. Results & Conclusions : A more effective differentiation of constitution and treatment could be achieved through the Life Structure Diagram, which could overcome limitations of pre-existing diagnosis and treatments of Korean Medicine.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권4호
• /
• pp.515-519
• /
• 1999

With the purpose of determining the influence of sexual partners on the oestrous behaviour and to evaluate the accuracy of predicting the time from implant withdrawal to sexual receptivity following a treatment with Synchromate B (SMB), 15 adult Brahman cows were used in each of three phases. During phase I and n, random pairs of animals were induced to display oestrus one pair after the other at daily intervals, while in phase III, cows were induced alternately, every other day, one cow on the 1st day, two on the 3rd, one on the 5th, two on the 7th until all cows were treated. Sixty six percent of the cows in phases I and II, and 80% in phase III came into oestrous after treatment. The interval between implant withdrawal and, expected and observed oestrous was statistically different in all phases. Clustering of oestrous was evident. Cows displayed sexual receptivity within a. range of -24 to +96; -24 to +72 and -216 to +192 hours after implant withdrawal for the three phases, respectively, with a tendency for cows treated first (within treatments), to delay their oestrus signs and vice versa. In phase III, four cows showed oestrous behaviour with the implant in place. These in spite of not observing pre-ovulatory follicles. Correlation values of 0.99, 0.93 and 0.90 (P<0.05) were found respectively among treatments, between the number of cows coming into oestrus and the number of mounts observed. These findings suggest that there are social and behavioural factors in a herd that may override exogenous synchronisation treatments.

• Journal of Preventive Medicine and Public Health
• /
• 제46권3호
• /
• pp.134-138
• /
• 2013

This road map aims to establish a stable and integrated healthcare system for the Korean Peninsula by improving health conditions and building a foundation for healthcare in North Korea through a series of effective healthcare programs. With a basic time frame extending from the present in stages towards unification, the roadmap is composed of four successive phases. The first and second phases, each expected to last five years, respectively, focus on disease treatment and nutritional treatment. These phases would thereby safeguard the health of the most vulnerable populations in North Korea, while fulfilling the basic health needs of other groups by modernizing existing medical facilities. Based on the gains of the first two phases, the third phase, for ten years, would prepare for unification of the Koreas by promoting the health of all the North Korean people and improving basic infrastructural elements such as health workforce capacity and medical institutions. The fourth phase, assuming that unification will take place, provides fundamental principles and directions for establishing an integrated healthcare system across the Korean Peninsula. We are hoping to increase the consistency of the program and overcome several existing concerns of the current program with this roadmap.

• 한국재료학회지
• /
• 제27권10호
• /
• pp.563-568
• /
• 2017

In this study, the coating of an Al-Cr layer on the surface of a Zircaloy-4 alloy was carried out through plasma pretreatment coating and a laser surface melting process. Two different conditions for laser treatment, severe or minimal surface melting of the Zr alloy substrate, were applied to form the final coating. When there was significant surface melting of the Zr alloy, the solidification microstructure of the newly formed coating layer was mainly composed of needle-shaped $Al_3Zr$, Al(Cr) and $Al_7Cr$ phases. On the other hand, the solidification microstructure of the coating layer was mainly composed of Al(Cr) and $Al_7Cr$ phases when there was minimal surface melting of Zr base in the laser process. However, when the coating was maintained at $1100^{\circ}C$ for 2 hours, significant inter-diffusion occurred between the phases in the coating. As a result, the upper part of the coating layer was observed to mainly consist of $Al_3Zr$ and $Al_8Cr_5$ phases, regardless of the laser treatment conditions.

• 한국전기전자재료학회논문지
• /
• 제16권12S호
• /
• pp.1278-1285
• /
• 2003

This study investigated the phase transformation of the REBa$_2$Cu$_3$$O_{7-x}$ (RE=Nd, Gd, Dy) superconductor, and CCT (Continuous-Cooling-Transformation) along with the TTT (Time-Temperature-Transformation) diagrams are suggested according to the isothermal and continuous cooling heat-treatments. The peritectic temperature of the 123 phases decreased approximately 3$0^{\circ}C$ when the ionic radius of the rare-earth elements was reduced. The optimum cooling rate where BC and Cu-free phases do not exist was 0.001$^{\circ}C$/s. At this cooling late, the 123 phase grew with a c-axis Perpendicular to the surface and had a well-distributed 211 phase. When the oxygen partial pressure was reduced Outing isothermal heat-treatment, the formation temperature of the 211 phase decreased. In addition, the formation temperature of the 123 phases decreased from 100$0^{\circ}C$ (Nd-123) to 9$25^{\circ}C$ (Gd-123), and finally 875$^{\circ}C$ (Dy-123) according to the decrease in the ionic radius of the tare-earth elements. Compared to Nd-123, Gd- and Dy-123 had a better texture with a well-distributed 211 phase.e.

• Korean Journal of Acupuncture
• /
• 제31권2호
• /
• pp.49-55
• /
• 2014

Objectives : Five transport points are often used in acupuncture treatment. However, there is no clear explanation about the reason why the five transport points are matched five phases in this manner. Therefore, we reviewed the literatures and theses about the principal of matching and researched a new way to understand the reason. Methods : We found 8 theses and 3 literatures related to the matching of five transport points to five phases by searching the web sites. And, we reviewed the principal of matching and researched another new way to understand the reason why they are matched so. Results and Conclusions : In the viewpoint of the natural state and function of five phases, the start points arising in yin- and yang-meridian are matched to wood and metal respectively. Therefore, well point matches the wood and metal in yin- and yang-meridian respectively. And by following the flow of five transport points, the other points match with fire, earth, metal, water in yin-meridian and water, wood, fire, and earth in yang-meridian.

• 한국재료학회지
• /
• 제14권3호
• /
• pp.181-185
• /
• 2004

The mechanical properties of a bulk amorphous alloy ($Zr_{41.2}$ $Ti_{13.8}$ /$Cu_{10}$ $Ni_{10}$ $Be_{22.5}$ /at.%) before and after an annealing treatment were investigated. For the bulk amorphous alloy, the compressive strength was about 2.0 GPa, irrespective of the strain rates in the range of $10^{-4}$ to $10^3$$ sec^{-1}$ . Fine-sized nanocrystalline particles (10～100 nm) were precipitated homogeneously in the bulk amorphous matrix after the annealing treatments. Compared to the bulk amorphous materials, these composite materials, composed of the nanocrystalline phases and a bulk amorphous matrix had much different mechanical properties. The strength and strain of coposite materials measured by a compressive test showed a peak-maximum values at 7 vol.% of the nanocrystalline phases. The values in higher volume fraction of the crystalline phases in the amorphous matrix were decreased, as measured by both quasi-static and high strain rate. The decrease in fracture strength is due to presence of the dispersed large-crystalline phases in the amorphous matrix.

• 소성∙가공
• /
• 제20권4호
• /
• pp.309-315
• /
• 2011

The behavior of metallic materials at high strain rates shows different characteristics from those in quasi-static deformation. Therefore, the strain rate should be considered when simulating crash events. The objective of this paper is to evaluate the dynamic tensile characteristics of SPRC440 as a function of the volume fraction of phases. As-received SPRC440 is composed of ferrite and pearlite phases. However, ferrite and martensite phases were observed after heat treatment at $730^{\circ}C$ and $780^{\circ}C$ for 5 minutes, as expected by calculations based on the curves from dilatometry tests. High cross-head speed tensile tests were performed to acquire strain-stress curves at various strain rates ranging from 0.001 to $300\;s^{-1}$, which are typical in real vehicle crashes. It was observed that the flow stress increases with the strain rate and this trend was more pronounced in the as-received specimens consisting of ferrite and pearlite phases. It is speculated that the dislocation density in each phase has an influence on the strain rate sensitivity.

• 열처리공학회지
• /
• 제31권5호
• /
• pp.220-230
• /
• 2018

The objective of this study is to investigate the effect of solution treatment on the microstructure and corrosion behavior of cast AZ91-4%RE magnesium alloy. In the as-cast state, microstructure of the AZ91-4%RE alloy was characterized by intermetallic ${\beta}(Mg_{17}Al_{12})$, $Al_{11}RE_3$ and $Al_2RE$ phase particles distributed in ${\alpha}-(Mg)$ matrix. After solution treatment, the ${\beta}$ particles with low melting point dissolved into the matrix, but Al-RE phases still remained due to their high thermal stabilities. It was found from the immersion and potentiodynamic polarization tests that corrosion rate of the AZ91-4%RE alloy increased after the solution treatment. On the contrary, EIS tests and EDS compositional analyses on the surface corrosion products indicated that the stability of the corrosion product was improved after the solution treatment. Examinations on the corroded microstructures for the ascast and solution-treated samples revealed that dissolution of the ${\beta}$ particles which play a beneficial role in suppressing corrosion propagation, would be responsible for the deterioration of corrosion resistance after the solution treatment. This result implies that the microstructural features such as amount, size and distribution of secondary phases that determine corrosion mechanism, are more influential on the corrosion rate in comparison with the stability of surface corrosion product.

• 한국분말재료학회지
• /
• 제30권6호
• /
• pp.470-477
• /
• 2023

The effects of annealing on the microstructure and mechanical properties of Al-Zn-Mg-Cu-Si alloys fabricated by high-energy ball milling (HEBM) and spark plasma sintering (SPS) were investigated. The HEBM-free sintered alloy primarily contained Mg₂Si, Q-AlCuMgSi, and Si phases. Meanwhile, the HEBM-sintered alloy contains Mg-free Si and θ-Al₂Cu phases due to the formation of MgO, which causes Mg depletion in the Al matrix. Annealing without and with HEBM at 500℃ causes partial dissolution and coarsening of the Q-AlCuMgSi and Mg₂Si phases in the alloy and dissolution of the θ-Al₂Cu phase in the alloy, respectively. In both alloys, a thermally stable α-AlFeSi phase was formed after long-term heat treatment. The grain size of the sintered alloys with and without HEBM increased from 0.5 to 1.0 ㎛ and from 2.9 to 6.3 ㎛, respectively. The hardness of the sintered alloy increases after annealing for 1 h but decreases significantly after 24 h of annealing. Extending the annealing time to 168 h improved the hardness of the alloy without HEBM but had little effect on the alloy with HEBM. The relationship between the microstructural factors and the hardness of the sintered and annealed alloys is discussed.