• 척추신경추나의학회지
• /
• 제2권1호
• /
• pp.85-97
• /
• 2007

Objectives : We evaluated the effect of Mckenzie method treatment by participating two patients suffering from Tortipelvis by lumbar disc herniation. Methods : Two patients were diagnosed as Tortipelvis by lumbar disc herniation through CT scan and X-ray examination. We used Mckenzie method and measured VAS(Visual analogue scale). Results and Conclusions : After using Mckenzie method treatment, We found out a recovery from both patients suffering from Tortipelvis by lumbar disc herniation. The result, through our study, suggests that Mckenzie method treatment was effective to cure the Tortipelvis by lumbar disc herniation. It also was effective to reduce the low back pain and to stabilize the lumbar disc herniation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.656-661
• /
• 2005

An optimization formulation of unconstrained damping treatment on beams is proposed to minimize vibration responses using a numerical search method. The fractional derivative model is combined with RUK's equivalent stiffness approach in order to represent nonlinearity of complex modulus of damping materials with frequency and temperature. The loss factors of partially covered unconstrained beam are calculated by the modal strain energy method. Vibration responses are calculated by using the modal superposition method, and of which design sensitivity formula with respect to damping layout is derived analytically. Plugging the sensitivity formula into optimization software, we can determine optimally damping treatment region that gives minimum forced response under a given boundary condition. A numerical example shows that the proposed method is very effective in minimizing vibration responses with unconstrained damping layer treatment.

• 척추신경추나의학회지
• /
• 제5권2호
• /
• pp.181-191
• /
• 2010

Current treatment for adolescent idiopathic scoliosis(AIS) consists of three phases: observation, bracing, and surgery. Although there are many nonsurgical treatment(bracing, electrical stimulation, exercise, manipulation, acupuncture, etc), their effect is still controversial. In many paper, Schroth method was reported good immediate response to conservative care, which could be considered a sign of good prognosis. Schroth method became effective thai specialists in physiotherapy for spinal deformities teach the patient how to perform a routine of 'curve pattern' specific exercises with the purpose to facilitate the correction of the asymmetric posture and to teach the patient to maintain the corrected posture in dally activities. This Principles of correction exercise treatment are based on those developed by the German physiotherepist K. Schroth.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.89-90
• /
• 2022

Arc metal spraying is a widely used method for improving the performance of construction structures such as corrosion resistance and electromagnetic wave shielding. However, when arc metal spraying is applied to a concrete structure, adhesion performance may deteriorate. Therefore, the effect of each surface treatment method on the physical properties between the arc metal spray coating and concrete was reviewed by evaluating the deposition efficiency and adhesion performance according to the arc metal spray surface treatment method (surface reinforcing agent, roughening agent, and sealing agent). As a result, it is suggested as an optimal surface treatment condition to induce non-interface failure by using a roughening agent and to improve the properties of concrete and metal coatings by applying a surface reinforcing agent and sealing agent.

• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.281-288
• /
• 2020

In this paper, we propose a control method to solve the surface hardness non-uniformity due to flow non-uniformity occurring in the heat treatment process of marine CAM. In the water cooling method including the decarbonization method, an automation device for deformation control has been developed and applied. LSTM was used to estimate the water cooling conditions, and the proposed method was found to be meaningful by improving the prototype results.

• 한국재료학회지
• /
• 제16권1호
• /
• pp.37-43
• /
• 2006

Carbon nanotube cathodes (CNT cathodes) were fabricated by a screen printing method using multi-walled carbon nanotubes. The effects of surface treatment on CNT cathodes were investigated for use in high efficiency field emission displays. The optimum surface treatment for a CNT cathode is dependent on a relative bonding force of CNT films on the cathode after a heat treatment. Because of the high bonding force used in the Liquid method, this method is recommended for CNT cathodes which are heat-treated at $390^{\circ}C$ in a $N_2$ atmosphere. The Rolling method is applicable for CNT cathodes fabricated at $350^{\circ}C$ in an atmosphere of air. The results of this study provide basic criteria for the selection of an appropriate surface treatment for large area CNT cathodes.

• 대한한의학원전학회지
• /
• 제33권3호
• /
• pp.91-109
• /
• 2020

Objectives : The aim of this paper is to compare the mechanisms of the OP/LB method and the SSD treatment in 『Piweilun』. Methods : Wenbing texts, articles on the OP/LB method, and the 『Piweilun』 was examined for comparison of treatment mechanisms of SSD. Results : The mechanism of the OP/LB method in treating SSD was to treat the Spleen and Stomach separately, to restore the ascending/descending pattern of qi through simultaneous use of pungent and bitter flavors which raises and lowers, respectively. Moreover, the use of medicinals with contrary properties regulate the other's biased nature, and none of the medicinals create dampness. The pungent and bitter flavors play central roles, where the pungent flavor opens and communicates and the bitter flavor clears and lowers. The treatment method of SSD in the 『Piweilun』 treat the Spleen and Stomach together, with a focus on raising and dispersing through upraising yang and reinforcing qi by means of Wind medicinals with pungent and bitter flavors added to sweet and warm medicinals. Conclusions : Owing to the expansion of the OP/LB method concept by modern-contemporary scholars, the potential for treating SSD as can be seen in the 『Piweilun』 with the OP/LB method has emerged. The similarity between the OP/LB method and treatment of SSD in the 『Piweilun』 is that the objective of the formulas is to lower fire heat and communicate qi to help qi movement. This common objective allows for treatment of SSD within Wenbing and those in 『Piweilun』 with the said formulas through appropriate modification fit for each situation.

• 한국가구학회지
• /
• 제18권4호
• /
• pp.275-281
• /
• 2007

This study was carried out to know bending process property of bentwood by treatment methods such as microwave and ammonia solution treatment. Bentwood processing was operated on bending-jig form with 60mm and 100mm radius of curvature (ROC). The species was used to Korean red pine (Pinus densiflora). No significant difference was shown in bentwood processing method on ROC. In treatment method, ammonia solution treatment for bentwood was better in dimensional stability and working ability than that of microwave treatment. However, bentwood stress was reduced with ammonia solution treatment. Color of bentwood surface appearance has a dark tendency in ammonia solution treatment. But it seems to beautiful effect of apparent annual ring is rising esthetically by ammonia solution treatment. To utilize wood as a exterior material for living amenity, it has to be closely examined from various angles including surface property, degree of swelling and shrinkage, drying state, retaining strength, durability, safety, and insect damage.

• 대한한의학원전학회지
• /
• 제22권3호
• /
• pp.79-95
• /
• 2009

Background : Eye diseases refer to a wide range of disconveniences from conjunctivitis, pterygium, glaucoma to even blindness. Acupuncture has been widely used in Korea throughout the history and provides an efficient method in the treatment of them. Objectives : Establish a distinctive and efficient acupuncture method for the treatment of eye diseases based in literature research. Method : We reviewed four Korean medical literature, "Guide to Swollen Sore Treatment[治腫指南]", "Treasured Mirror of Eastern Medicine[東醫寶鑑]", "Experiential Prescriptions of Acupuncture and Moxibustion[鍼灸經驗方]", and "Essential Rhymes on Acupuncture and Moxibustion by Master Saam[舍岩鍼法]", and analyzed the therapeutic characteristics in the treatment of eye diseases. Result : 1. According to "Guide to Swollen Sore Treatment[治腫指南]", various methods were applied in the treatment of eye diseases. We can cite salt water washing method after needling, pricking bloodletting method using three-edged needle, surgery method using bent needle and lance needle, or sore treatment using sliced bean-curd and ground Aristolochiae Fructus among others. Acupuncture points like GV20[百會], BL1[睛明], EX-HN5[太陽], GB20[風池], GV24[神庭], GB1[瞳子髎], and GB15[臨泣] were mostly needled. 2. In "Treasured Mirror of Eastern Medicine[東醫寶鑑]", pricking bloodletting method were most frequently used in comparison to single acupuncture or moxibustion methods. Applied points were GV20[百會], BL1[睛明], LI4[合谷], EX-HN5[太陽], GB37[光明], BL18[肝兪], GB20[風池], BL2[攢竹], GB1[瞳子髎], and ST36[三里]. Also selections of adjacent points were considered important. 3. In respect to treatment methods "Experiential Prescriptions of Acupuncture and Moxibustion [鍼灸經驗方]" has some similarity to "Treasured Mirror of Eastern Medicine[東醫寶鑑]" as pricking bloodletting method were mostly used. Also focused on normal Qi flow through meridian. Points like BL18[肝兪], BL1[睛明], LU5[尺澤], EX-HN5[太陽], LI4[合谷] were used. 4. "Essential Rhymes on Acupuncture and Moxibustion by Master Saam[校勘舍岩道人鍼法]" considered visceral pattern identification method fundamental in the diagnosis and treatment of eye diseases. Specifically, Liver, Heart, Stomach, Lung, Kidney identification methods are presented. Combined both corresponding and connecting meridians supplementation and draining methods according to mother-child relation. Also Saam master's own experiential prescriptions are noted. Conclusions : After previous study on stroke, we could also find various efficient methods according to eye diseases, through literature research of korean medical classics. This study will concurrently result in establishing distinctive therapeutic method characteristic of Korea.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권8호
• /
• pp.1048-1054
• /
• 2011

레이저 표면경화처리는 고밀도 에너지 열원에 의해 레이저 조사부위만 급속 가열한 후 표면의 열이 내부로 전도되어 급속히 자기냉각 됨으로써 표면을 경화시키는 방법이다. 이 표면처리 방법은 열처리에 의한 열변형이 거의 없고, 표면경화처리 이후 다른 공정을 수반하지 않는다. 또한 국부적인 가공이 가능하기 때문에 복잡한 형상을 가지는 금형에는 적합한 표면처리 방법이다. 본 연구에서는 열처리에 적합한 빔 프로파일을 가진 고출력 다이오드 레이저를 이용하여 금형재료용 주철의 표면처리를 실시하였다. 프레스 금형 공정에 따른 금형의 형상이 다르기 때문에 적용부위에 따라 시험편을 평면과 모서리부로 나누어 열처리를 실시하였다. 이때 모서리부의 열처리는 광학헤드를 $10^{\circ}$ 기울인 상태에서 진행하였다. 그 결과, 모서리부의 열처리는 평면부와 비교하여 형상에 따른 열전달 루트가 제한되므로, 입열이 집중되기 쉬워 평면 열처리보다 빠른 이송속도에서 경화가 이루어졌다.