• 대한치과보철학회지
• /
• 제25권1호
• /
• pp.95-118
• /
• 1987

This study was undertaken to observe the elemental transition of Interface depending on different pretreatment methods, the number of filings, the kinds of porcelain powders and the various alloys in ceramo-metal restoration. The materials used in this study were Pors-on $4^{(R)}$ and Ceramco porcelain powder to compare the differences depending on the pretreatement methods and the number of firings. Ceramco porcelain powder and Vita porcelain powder were used to compare the differences of elemental transition depending on the porcelain powders. The $Parasil^{(R)},\;PGV^{(R)}$ and Pors-on $4^{(R)}$ as Pd-Ag alloy were used to compare the difference of elemental transition depending on the various alloys. The pretreatment methods were : no treatment, treatment under vacuum and air, treatment with 50 % hydrofluoric acid and double heat tretament. The number of firings were 3, 5 and 7 repeated firings All specimens were observed by SEM and concentration of elements were analyzed quantitatively with EPMA The results of this study were obtained as follows : 1. In the groups of air-treatment, concentration of Sn were the highest and widest. A high concentration of In were in the groups of vacuum and air treatment. 2. There were no significant differences in concentration of Sn between the group of vacuum, 5 minutes hydrofluoric acid and double heat treatment. (p>0.05) 3. As the period of time of hydrofluoric acid treatment increased, not only were the trace elements reduced but the main components such as Pd and Ag were also reduced. 4. Concentration of Sn and In increased and diffused with repeated firings but 5 repeated and 7 repeated firings groups had no significant differences. (p>0.05) 5. Sn were more concentrated in the group of Ceramco porcelaion powder than Vita porcelain powder. 6. The higher concentration of trace elements in the alloy, the more increasing concentration of Sn and In in the interface.

• 한국염색가공학회지
• /
• 제10권3호
• /
• pp.50-56
• /
• 1998

Nonwoven fabric was treated with chitosan solution to impart antimicrobial activities by pad-dry method. Antimicrobial activity was measured by Shake Flask Method. Two chitosans of different molecular weight(Mw) with similar degree of deacetylation(DDA) were used : ca. 1,800(chitosan oligomer : DDA 84%) and 180,000(DDA 86%). Chitosan oligomer displayed high antimicrobial activity against P. vulgaris at 0.01%, S. aureus and E. coli at 0.05% treatment concentration, shelving above 90% of reduction rate. Chitosan of Mw 180,000 was effective against S. aureus, E. coil and P. vulgaris at 0.05% treatment concentration, showing almost 100% reduction rate. While chitosan of Mw 180,000 shelved reduction rate above 75% against K. pneumoniae and P. aeruginosa at 0.5% treatment concentration, chitosan oligomer was not effective against them. Fabrics become stiffer and less air permeable as treatment concentration increases. Liquid strike-through time of the sample treated with 0.5% chitosan oligomer solution (3.0 sec) was comparable with a hydrophilic finished sample commercially available(2.6 sec).

• 한국작물학회지
• /
• 제43권3호
• /
• pp.152-156
• /
• 1998

This study was conducted to elucidate the changes of photosynthetic ability and cation content in barley cultivar seedlings cultured for 10 and 30 days with different NaCl concentrations containing 1/4 Hoagland solutions. At the highest NaCl concentration, the weight of dry matter and the shoot/root ratio (S/R ratio) were decreased. Thus, shoots were affected more than roots by NaCl treatment. The S/R ratio decreased more in 'Neulssalbori' than in 'Bunong' by the NaCl treatment. The. internal $Na^+$ concentration increased greatly with the highest NaCl concentration, but $K^+$ concentration in plants decreased with the highest NaCl treatment. The $Ca^{2+}$ concentration had a small change with NaCl concentrations. Thus $Na^+$/$K^+$and $Na^+$/$Ca^{2+}$ratios increased with the highest concentration. The chlorophyll content (%/dry weight) of seedlings decreased at higher NaCl levels except for Bunong in 30 day old seedlings. The photosynthetic ability decreased only for Neulssalbori in the 10 days NaCl treatment. The stomatal conductance, and transpiration had decreased in the 10 day old seedlings, but not with 30 day old seedlings.

• 한국농공학회지
• /
• 제40권3호
• /
• pp.83-92
• /
• 1998

Field experiment was performed from August 1996 to January 1998 to examine the applicability of constructed wetland system for wastewater treatment in rural area. The pilot plant was installed in Kon-Kuk University and the school building septic tank effluent was used as an influent to the treatment basin. Hydraulic loading rate was about 0.1 6$0.16^3/m^2$ day and theoretical detention time in the system was 1.38 days. The treatment basin was composed of sand and reed. The influent DO concentration was low and many cases close to zero, but effluent concentration was higher than the influent which implies that oxygen was supplied naturally. The average concentration of influent BOD was 126mg/L, and with average removal rate of 69 % the average effluent concentration was 4Omg/L which satisfied the effluent water quality standard for the system of interest. The average influent concentration of COD was 2Olmg/L and average effluent concentration was 75mg/L with average removal rate of 60%. The performance of BOD and COD tends to deteriorate in the low temperature, and appropriate action needs to be taken during the cold winter time for stable operation. The average influent concentration of SS was 5Omg/L, and effluent was 1 1mg/L with average removal rate of 76% which satisfied the effluent water quality standard for the system of interest. The results for the regulated components, SOD and SS, from the experiment showed that constructed wetland system can meet the effluent water quality standards. The average influent concentration of total phosphorus was 25.6mg/L and average effluent concentration was 7.8mg/L with average removal rate of 63%. Not like the performance of the above components, average nitrogen removal rate was only 11.2% which is not satisfactory. Although, nitrogen is not regulated at this moment, it can cause many environmental problems including eutrophication. Therefore, nitrogen removal efficiency should be improved for actual application. From the result of the field experiment, constructed wetland system was thought to be an appropriate alternative for wastewater treatment in rural area.

• 한국응용과학기술학회지
• /
• 제24권4호
• /
• pp.332-338
• /
• 2007

Based on the experiment results of laboratory scale modified anoxic-oxic process for leachate treatment, biological nitrogen removal program was verified in terms of SS, COD, and TN concentration. These measured water qualities concentration could be predicted by biological nitrogen removal program with $R^2$ of 0.994, 0.987, 0.990, respectively. No error was occurred between water qualities concentration and quite wide range of water qualities concentration (i.e., 50-4200 mg/L) during the modelling. Each unit and final effluent of simulated concentration was kept good relationship with that of measured concentration therefore this biological nitrogen removal program for sewage or wastewater treatment plants has good reliance.

• 대한한방내과학회지
• /
• 제24권2호
• /
• pp.358-364
• /
• 2003

Effects of Cheunhwasangamibang on serum glucose and lipid composition were investigated in high fat diet induced diabetic rat. Plasma glucose and free fatty acids concentration showed a high reduction in Cheunhwasangamibang groups compared to those of control group and these values decreased to increasing Cheunhwasangamibang concentration. Plasma ${\beta}$-lipoprotein and triglyceride concentration showed a low values in Cheunhwasangamibang groups, however these values showed no significantly different in 4 ml and 6 ml treatment groups. Total cholesterol concentration showed no significantly different in control group and 2 ml Cheunhwasangamibang group, however these values in 4 ml and 6 ml treatment groups showed a reduction compared to those of control group. Plasma LDL-cholesterol concentration showed a reduction in Cheunhwasangamibang group and HDL-cholesterol showed no significantly different in all treatment groups.

• 상하수도학회지
• /
• 제8권1호
• /
• pp.34-43
• /
• 1994

It is well known that the adsorption character of activated carbon is dependent on the specific surface area and pore volume, but the relationship between the surface-chemical structure and the adsorption character has not been studied very often. The purpose of this study is to investigate the effect of the acidic surface functional groups of activated carbon and the adsorption characteristics of low concentration phenol. So three types of activated carbons and four different treatments were introduced to this isotherm experiment. These treatments were nontreatment, 1N $HNO_3$ treatment, 6N $HNO_3$ treatment, $H_2O_2$ treatment. The conclusions of this study are as followings. If the initial concentration of phenol is high as 5mg/l, the adsorption is dependent on the specific surface area. If the initial concentration of phenol is low as $100{\mu}g/l$, the adsorption is dependent on the average pore volume. The acidic surface functional groups prevent the adsorption of phenol molecules to activated carbon. And the adsorbed amount decreases more for $HNO_3$ treatment than for $H_2O_2$ treatment and more for concentrated $HNO_3$ treatment than for dilute $HNO_3$ treatment.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.37-43
• /
• 2016

Various mechanical and chemical pretreatment methods including alkali treatment, pre-beating, enzyme treatment and oxidation treatment have been used to reduce the production energy of the microfibrillated cellulose (MFC). Among them, alkali swelling can be helpful to reduce the energy consumption because the internal bonding between fibrils could be weakened. In this study, dimethyl sulfoxide (DMSO) was used as a cosolvent to improve alkali pretreatment efficiency and the effects of NaOH concentration during NaOH-DMSO swelling on changes in fiber characteristics of softwood bleached kraft pulp (SwBKP) were elucidated. For alkali treatment in H2O-DMSO solvents, fiber length were decreased with increasing NaOH concentration while fiber width, curl and WRV were increased. WRV began to increase at 8% NaOH solution. In addition, above 8% concentration of NaOH, crystalline structure of pulp fibers converted from cellulose II to cellulose III by DMSO cosolvent. Comparing the previous results with this study, it was shown that DMSO cosolvent could promote swelling of pulp fibers and thus reduce NaOH concentration for the maximum swelling of fibers.

• 한국의류학회지
• /
• 제24권1호
• /
• pp.87-95
• /
• 2000

The changes on shrinkage, dyeability, antimicrobial activities and other physical properties of wool fabrics by chitosan treatment were investigated. A acid dye, a basic dye and natural artemisia were used for dyeing of wool fabrics. For Antimicrobial test of wool fabrics, S.Aureus was used. As the results, The wool fabrics treated with chitosan showed a marked decrease in shrinkage. Dyeability increased slightly as concentration of chitosan treatment increased, Dyeability of acid dye was the highest than other dyes. On the other hand, the dyeability of basic dye on chitosan treated fabrics was lower than untreated fabrics. Reduction rates of colony of chitosan-treated wool fabrics showed from 64.8% to 85.24% as chitosan concentration increased. Reduction rates of colony of the chitosan-treated fabrics decreased by dyeing with acid and basic dye. But increased by retreating with chitosan. Fabrics dyeing with atremisia showed above 90% reduction rate against S.Aureus on all chitosan concentrations. The Tensile properties of chitosan-treated fabrics showed little decrease. The moisture regain and the air permeability was decreased on chitosan concentration on 0.1% but recovered as chitosan concentration increased. The warmth retention was increased a little by chitosan treatment. The drapeability became hard as chitosan concentration increased.

• 한국가금학회지
• /
• 제16권1호
• /
• pp.23-28
• /
• 1989

난백단백질의 농도와 당류의 첨가 수준이 난백의 열감수성에 미치는 영향을 검토하기 위하며 가열처리.($60^{\circ}C$, 5분간) 전후 난백의 기능성을 측정하였으며 그 결과는 다음과 같다. 난백단백질의 농도 8.3%까지는 가열처리 전후 난백의 탁도가 감소하였으나 희석됨에 따라 증가하다가 3.32% 이하에서는 다시 감소하였다. 가열처리 전후 난백의 기포력은 단백질 농도 8.3%에서 가장 높았으며 희석됨에 따라 점차 감소하였고 기포안정성은 단백질 농도가 희석됨에 따라 점차 저하하였다. 난백에 sucrose를 첨가할 경우 탁도의 변화가 없었으나 가열처리의 경우에는 sucrose의 첨가량에 따라 점차 감소하였다. 기포력은 sucrose 5%이상 첨가 시 감소하였으며 가열처리의 경우에는 sucrose 2.5%이상 첨가 시 점차 감소하였다. 기포안정성은 sucrose를 5%이상 진가할 경우 점차 증가하였으나 가열처리한 경우에는 sucrose의 첨가량에 따라 증가하였다. Glucose의 첨가량에 따라서는 탁도가 높아졌으며 가열처리 시에는 변화가 없었다. 기포력은 Glucose의 첨가량에 따라 점차 감소하였으며 가열처리의 경우에는 5%이상 첨가 시 다소 감소하였다. 기포안정성은 가열처리 전후 glucose의 첨가량에 따라 증가되었으며 sucrose의 첨가시 보다 크게 증가되었다.