• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.119-128
• /
• 2017

Purpose: The purpose of this study was to measure the average actual treatment time at the time of Tomotherapy treatment. We want to investigate the time required for the procedure in the treatment process that affects the actual treatment time. Patients and Methods: We measured the time required by the procedure in 31 patients who were treated with tomography therapy. Beam-on time, Image registration time, Set-up with scan time and Actual treatment time were measured and stepwise regression analysis was performed. Result: The average treatment time per a patient was 21.44 - 23.92 minutes. Beam-on time, Image registration time, and Set-up with Scan time were the important factors affecting the actual treatment time. The biggest influence was Beam-on time and Registration time was less affected by analysing. Conclusion: The average treatment time per a patient in tomotherapy treatment was $22.68{\pm}3.37$ minutes. The Approximately 21 patients are expected to be treated within 8 hours of regular work time. However, if the treatment is interrupted or the time of the procedure is changed during the treatment process, it affects the schedule of the daily treatment patients and the workload is expected to increase.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.10 no.2
• /
• pp.78-83
• /
• 2014

The objective of this study was to confirm the validity of classification of dental disability by measuring the dental treatment time required for disabled patients and identify the disability type that requires more of chair time. As a result of measuring a total of 123 patients who were admitted to the Seoul dental hospital for the disabled on Oct. 2014, I was able to make the following conclusions: 1. For dental counseling and check-up, the chair time did not show significant differences between the different types of disability. 2. For periodontal treatment, restorative treatment, root canal treatment, and surgical treatment, the difference of the chair time for dentally disabled patients was significantly longer than that of non-dentally disabled patients. 3. The difference in the total chair time for prosthetic treatment was statistically insignificant. However, each of the prosthetic treatment steps did show statistically significant differences.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.4
• /
• pp.119-130
• /
• 2002

Objective: The purpose of this research was to use data for furnish quality physical therapy service. The research subjects were admitted shoulder pain patients treated with physical therapy that was to grasp physical therapy method as distinguishing application time. Subject: Total number of distributed questionnaire was 563 persons that was to utilized physical therapy room of 56th medical institution and distributed it to each physical therapist in charge. Method: The research used questionnaire in order to research itemized treatment application time that is according to physical therapy method to applicated with shoulder pain patient. The research contents is to received shoulder pain diagnosis period, total duration of utilizing physical therapy room, the number of times per week to used physical therapy room, etc. And we had physical therapist recording the time of application physical therapy method come under the items. Result: The average treatment time was 59.2 minutes at all patients. During this time, 39.7 min was modality treatment. Active movement treatment was only 7.1 min. Total treatment time was longest in general hospital at 64.9 min, it was shortest in clinical hospital at 53.3 min. Treatment time was difference as hospital scale(p<0.001). Active movement treatment time was longest in general hospital at 11.5 min. The average treatment time was 4.5 min in clinical hospital. Therefore, it was related to hospital scale(p<0.05). The average of manual therapy time by physical therapist was 7.5 min. General hospital was linger at 8.6 min than clinical hospital at 6.7 min(p<0.05). Patient of 90.2 % were treated to hot pack, ultra-sound treatment was next as 50.1%. Active strengthening exercise was most carrying out of the active treatment as 25.4 %. Active sensorimotor exercise was practiced only 28 persons of 5.0 %. Most joint mobilization (38.4 %) was used of the passive manual therapy items, next to soft tissue mobilization (33.0 %), and next to manual distraction therapy(14.0 %).

• Health Policy and Management
• /
• v.31 no.1
• /
• pp.91-99
• /
• 2021

Background: The Korean government introduced National Cancer Control Program and strengthening national health insurance coverage for cancer patients. Although many positive effects have been observed, there are also many concerns about cancer management such as patient concentration or time-to-treatment. Thus, we investigated the association between the time-to-treatment and survival of cancer patients, and compared regional differences by time trend. Methods: The data used in this study were national health insurance claims data that included patients diagnosed with lung cancer and received surgical treatment between 2005 and 2015. We conducted survival analysis with Cox proportional hazard model for the association between time-to-treatment and survival in lung cancer. Additionally, we compared the regional differences for time-to-treatment by time trend. Results: A total of 842 lung cancer patients were included, and 52.3% of lung cancer patients received surgical treatment within 30 days. Patients who received surgical treatment after 31 days had higher 5-year or 1-year mortality compared to treatment within 30 days (5-year: hazard ratio [HR], 1.566; 1-year: HR, 1.555; p<0.05). There were some regional differences for time-to-treatment, but it was generally reduced after 2010. Conclusion: Delayed surgical treatment after diagnosis can negatively affect patient outcomes in cancer treatment. To improve cancer control strategies, there are needed to analyze the healthcare delivery system for cancer care considering the severity and types of cancer.

• Journal of Korean Academy of Nursing
• /
• v.30 no.3
• /
• pp.659-669
• /
• 2000

Many patients of acute myocardial infarction showed delay time before seeking treatment although they needed immediate thrombolytic therapy once they perceived their symptoms. The objectives of this study were to identify the relationship between clinical symptoms and the delay, and to find the time spent before seeking the treatment. This study was a retrospective research. The delay time for the treatment consisted of the length of delay from symptom onset to patients' decision (T1), from patients' decision making to finding transportation (T2), and from taking transportation to the first hospital arrival(T3). The subjects were 89 patients who were admitted in the ICU and Cardiac Ward at Chonnam University Hospital with the first attack of acute myocardial infarction. Center, USA The data was collected for three months from March 1st to May 31st of 1998 through questionnaires and reviewing patients' charts: The chart information was suppled by two nurses working at the ICU and Cardiac Ward. The data was analyzed by using frequency, mean and ANOVA through the SAS program. The results of study summarized as follows: 1. Sixty two patients (69.7%) were male and twenty seven patients (30.3%) were female, the ratio of male to female was 2.3 : 1. 2. In daily life, the 70.8% of the patients felt chest pain and discomfort fatigue in 67.4%, dyspnea in 57.3%, and pain in arm, neck, and jaw in 52.8%. During the attack, 97.8% of the patients felt chest pain and discomfort dyspnea in 82.1%, pain in arm, neck, jaw in 67.4% and perspiration in 51.7%. 3. The length of time a patient spent seeking time for treatment (T1+T2+T3) was 94.6 minutes, in which the time for patients' decision making for treatment (T1) was 70.3 minutes, time for finding transportation (T2) was 8.2 minutes, and time for the transportation of the patient to the first hospital (T3) was 16.1 minutes. Time for patients' decision making to go to a hospital(T1) was 74.2% of the total time sought for treatment. 4. The differences of time sought for treatment between perceptions about the seriousness of the symptoms were significant (F= 6.5, p< .01). The more serious the heart symptoms they felt, the shorter the seeking time for treatment. 5. The differences of the time delay before treatment between the degree of the symptoms were significant (F= 2.9, p< .05). The patients with the typical chest pain and discomfort spent shorter the seeking time for treatment than those with the atypical symptoms of acute myocardial infarction. 6. The differences of transportation time to the first hospital between the types of cars that the patients used, were significant (F= 4.3, p< .01). When the patients used 119 or 129 they spent the least time (5.3 minutes) for transportation, and followed by way of an ambulance (15.6 minutes), private car (20.6 minutes), and taxi (24.8 minutes).

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.9-17
• /
• 2001

The purpose of this study is to present basic data for the enzymatic modification of acetate fabrics. The weight loss and rate of weight loss of acetate fabrics increased with increasing NaOH concentration and treating time. Acetyl value decreased as the weight loss became higher. The weight loss of alkaline-treated acetate fabrics were directly proportional to the concentration and treating time of cellulase. The optimum temperature and pH in cellulase treatment were $55^\circ{C}$ and pH 3.5. The surface shape revealed that density of fiber decreased by alkaline-treatment. With the treating time of cellulase, fibrillation occurred. In case of higher weight loss in alkaline treatment, fibril is removed after 180 min. The tensile strength decreased by alkaline and cellulase treatment. Especially, in case of higher weight loss of alkaline treatment, tensile strength decreased suddenly. Alkaline treatment increased the drapability of acetates, while cellulase treatment increased it initially but decreased gradually with treatment time. The dyeability after alkaline treatment was improved for reactive dye, but deteriorated for disperse dye. The cellulase treatment of acetate lowered the dyeability for both types of dyes.

• Journal of Sericultural and Entomological Science
• /
• v.42 no.1
• /
• pp.48-57
• /
• 2000

This study was undertaken to figure out the effects of hydrolysis conditions on the solubility of insoluble sericin, molecular weight distribution and thermal characteristics of hydrolysates in enzymatic hydrolysis by Alcalase 2.5L. It was indicated that the optimum treatment temperature and pH for the insoluble sericin were 50$\^{C}$ and 11, respectively. When the insoluble sericin was hydrolyzed with a various treatment conditions, the solubility of all hydrolysates were represented above 85% at given conditions. As the enzyme concentration increased, the solubility increased roughly, but the solubility increasement ratio was less above 2% enzyme concentration. As the treatment time increased, the solubility was also increased. It was showed in the molecular weight distribution of hydrolysates treated various enzyme concentrations and treatment times that when enzyme concentrations were 0.5, 2, 3%, the peaks of the distribution curve were shifted to left side which meant low molecular weight and was distributed much quantity with shifted to be left side, but treatment time was 6 hr. the peak was shifted to right side. When enzyme concentration was 5% and treatment time was below 2 hr., the peaks were shifted to right side, but treatment time was above 4hr. the peak was shifted to left side. The number-average molecular weights were distributed from 300 to 800 and those were decreased when treatment time was up to 4 hr., but increased a little when treatment time was 6hr. It was showed in the DSC curves of hydrolysates treated with treatment time of 0.5, 1, 2, 4, 6 hr. fixed 1% o.w.s enzyme concentration and control that the endothermic peak was observed near at 200$\^{C}$. The denaturation peak of the hydrolysates depending on treatment times had a tendency to shift to higher temperature. But, when the treatment time was 6 hr., the peak was shifted to lower temperature comparing another hydrolysates.

• Food Science and Preservation
• /
• v.5 no.2
• /
• pp.177-185
• /
• 1998

For the purpose of enhanceing soybean-sprouts quality, the optimum conditions for ozone treatment of soybean during soaking before cultivation at 18~2$0^{\circ}C$ were evaluated with ozone concentration, treatment time and treatment frequency by response surface methodology. Germination rates of cleaned soybean by ozone water in the conditions of solubilized-ozone concentrations of 0.15 to 0.35ppm, ozone-treatment frequency of 1.5 to 2.3 times and ozone-treatment time of 30 to 36min. increased 18.8 to 24.0% for the control products. And, length of hypocotyl in conditions of 0.12 to 0.33ppm, 1.7 to 2.7 times and 45 to 90min. were also increased by 69.36 to 79.40%. On the other hand, weight of roots with ozone treatment were decreased in the conditions of solubilized ozone concentrations of 0.1 to 0.2ppm and ozone-treatment time of 30 to 57min. But, ozone-treatment frequency did not affected root growth. Putrefaction rates of the control were 5 to 15%, but those of ozone-treated samples during cultivation did not show. The overall optimum conditions for above 16% germination rates, above 9% hypocotyl yields compared to the control samples and below 98% of the control root weight were solubilized-ozone concentrations of 0.25 to 0.30ppm, ozone-treatment time of 43 to 49min. and ozone-treatment frequency of one time.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1454-1464
• /
• 2005

The study was based on a three-stage, non-repetitive factorial experiment in which chemical-rotted kenaf fibers were treated separately with hydrogen peroxide concentrations of $0.5\%,\;1\%\;and\;2\%$, with pH solutions of 7, 9 and 11, and treatment times of 30, 60 and 90 minutes. Under optimal conditions, the study was conducted to determine the strength and elongation of kenaf fibers by the addition of chelators, penetrants and surfactants. The hydrogen peroxide concentration, solution pH and treatment time directly affected the strength of kenaf fibers. The hydrogen peroxide concentration, solution pH affected the elongation of kenaf fibers. It was found, however, that the interaction between pH and treatment time, concentration and treatment time, concentration and treatment time and pH affected the strength of kenaf fibers. Also, It was found that the interaction between pH and concentration, concentration and treatment time, concentration and treatment time and pH affected the elongation of kenaf fibers. Under the hydrogen peroxide conditions of $2\%$ concentration, pH 11 and a treatment time of 60 minutes, there were no effects on the strength and elongation of kenaf fibers with the addition of chelator SP, CA.

• Progress in Medical Physics
• /
• v.28 no.2
• /
• pp.39-44
• /
• 2017

This study aims to analyze dose distribution and treatment time of endobronchial brachytherapy (EBBT) by changing the position step size of the dwell position. A solid water phantom and an intraluminal catheter were used in the treatment plan. The treatment plans were generated for 3, 5, 7, and 10 cm treatment lengths, respectively. For each treatment length, the source position step sizes were set as 2.5, 5, and 10 mm. Three reference points were set 1 cm away from the central axis of the catheter, along the axis, for uniform dose distribution. Volumetric dose distribution was calculated to evaluate the dosimetric effect. The total radiation delivery time and total dwell time were estimated for treatment efficiency, which were increased with position step sizes. At half-life time, the differences between the position step sizes in the total radiation delivery time were 18.1, 15.4, 18.0, and 24.0 s for 3, 5, 7, and 10 cm treatment lengths, respectively. The dose distributions were more homogenous by increasing the position step sizes. The dose difference of the reference point was less than 10%. In brachytherapy, this difference can be negligible. For EBBT, the treatment time is the key factor while considering the patient status. To reduce the total treatment time, EBBT can be performed with 2.5 mm position step size.