• 대한물리치료과학회지
• /
• 제9권4호
• /
• pp.119-130
• /
• 2002

Objective: The purpose of this research was to use data for furnish quality physical therapy service. The research subjects were admitted shoulder pain patients treated with physical therapy that was to grasp physical therapy method as distinguishing application time. Subject: Total number of distributed questionnaire was 563 persons that was to utilized physical therapy room of 56th medical institution and distributed it to each physical therapist in charge. Method: The research used questionnaire in order to research itemized treatment application time that is according to physical therapy method to applicated with shoulder pain patient. The research contents is to received shoulder pain diagnosis period, total duration of utilizing physical therapy room, the number of times per week to used physical therapy room, etc. And we had physical therapist recording the time of application physical therapy method come under the items. Result: The average treatment time was 59.2 minutes at all patients. During this time, 39.7 min was modality treatment. Active movement treatment was only 7.1 min. Total treatment time was longest in general hospital at 64.9 min, it was shortest in clinical hospital at 53.3 min. Treatment time was difference as hospital scale(p<0.001). Active movement treatment time was longest in general hospital at 11.5 min. The average treatment time was 4.5 min in clinical hospital. Therefore, it was related to hospital scale(p<0.05). The average of manual therapy time by physical therapist was 7.5 min. General hospital was linger at 8.6 min than clinical hospital at 6.7 min(p<0.05). Patient of 90.2 % were treated to hot pack, ultra-sound treatment was next as 50.1%. Active strengthening exercise was most carrying out of the active treatment as 25.4 %. Active sensorimotor exercise was practiced only 28 persons of 5.0 %. Most joint mobilization (38.4 %) was used of the passive manual therapy items, next to soft tissue mobilization (33.0 %), and next to manual distraction therapy(14.0 %).

• 한국기계가공학회지
• /
• 제7권1호
• /
• pp.9-16
• /
• 2008

It is important not only to reduce the casting defects of piston but also to improvement in the mechanical properties(hardness) of piston for the air compressor. The blow hole is typical casting defects in the conventional cast of aluminium alloy(AC8A-T6) piston. Because of the heat treatment method, mechanical properties of the aluminium alloy for piston was decided on the heat treatment method and cycle. Therefore, we tested on the development of mechanical properties and on the casting defects of piston for the air compressor in accordance with the heat treatment and casting condition. After the heat treatment and casting was carried out as several times, and was compared with the imported piston. As a result of several investigations; microstructure, hardness and casting defects of piston was changed under the influence of the heat treatment and casting method. When the cooling rate was controlled and the uni-cast method used, it bas the same mechanical properties and microstructure.

• 대한한의학회지
• /
• 제37권3호
• /
• pp.87-96
• /
• 2016

Objectives: Through this study, it would be expected to compare the characteristics of medicinal and acupuncture treatment. Method: Ontology DB of traditional Korean medicine has been used comparing medicinal and acupuncture treatment. Terms of the efficacy and the method of treatment were divided to predicate and object. And two groups were compared through contrasting the frequency of occurrence of significant words. Results: Predicates utilized more in medicinal treatment are the character ryeom[斂], go[固], pa[破], nae[內], and tu [透]. Predicates utilized more in acupuncture treatment are the character so[疏], jo[調], and seo[舒]. Object utilized more in acupuncture treatment is the character gi[氣]. Object utilized more in medicinal treatment is the character jeong[精]. Conclusions: In terms about the efficacy of acupuncture, there are many expressions associated with Qi[氣]. But expressions associated with Jing[精] are rare compare to medicinal treatment. There is a difference in language that represents the efficacy between medicinal and acupuncture treatment. In addition, there are some terms about efficacy that are not shared with each other due to the differences in disease treatment and the different branches of the two theories.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.411-417
• /
• 2008

The surfaces of henequen fibers, which can be obtained from the leaves of agave plants, were treated with two different media, tap water and sodium hydroxide, that underwent both soaking and ultrasonic methods for the fiber surface treatment. Various biocomposites were fabricated with untreated and treated, chopped henequen fibers and polypropylene using a compression molding method. The result is discussed in terms of interfacial shear strength, flexural properties, dynamic mechanical properties, and fracture surface observations of the biocomposites. The soaking (static method) and ultrasonic (dynamic method) treatments with tap water and sodium hydroxide at different concentrations and treatment times significantly influenced the interfacial, flexural and dynamic mechanical properties of henequen/polypropylene biocomposites. The alkali treatment was more effective than the water treatment in improving the interfacial and mechanical properties of randomly oriented, chopped henequen/PP bio-composites. In addition, the application of the ultrasonic method to each treatment was relatively more effective in increasing the properties than the soaking method, depending on the treatment medium and condition. The greatest improvement in the properties studied was achieved by ultrasonic alkalization of natural fibers, which was in agreement with the other results of interfacial shear strength, flexural strength and modulus, storage modulus, and fracture surfaces.

• 한국재료학회지
• /
• 제32권10호
• /
• pp.414-418
• /
• 2022

Magnesium alloy is the lightest practical metal. It has excellent specific strength and recyclability as well as abundant reserves, and is expected to be a next-generation structural metal material following aluminum alloy. This paper investigated the possibility of thin plate fabrication by applying a overheating treatment to the melt drag method, and investigating the surface shape of the thin plate, grain size, grain size distribution, and Vickers hardness. When the overheating treatment was applied to magnesium alloy, the grains were refined, so it is expected that further refinement of grains can be realized if the overheating treatment is applied to the melt drag method. By applying overheating treatment, it was possible to fabricate a thin plate of magnesium alloy using the melt drag method, and a microstructure with a minimum grain size of around 12 ㎛ was obtained. As the overheating treatment temperature increased, void defects increased on the roll surface of the thin plate, and holding time had no effect on the surface shape of the thin plate. The fabricated thin plate showed uniform grain size distribution. When the holding times were 0 and 30 min, the grain size was refined, and the effect of the holding time became smaller as the overheating treatment temperature increased. As the overheating temperature becomes higher, the grain size becomes finer, and the finer the grain size is, the higher the Vickers hardness.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권4호
• /
• pp.68-75
• /
• 2018

기존의 정수처리 방법으로는 제거되지 않는 물질이 발생함에 고도정수 처리 시설의 도입이 증가하고 있다. 그러나 오존을 이용한 고도정수처리 시설의 내부 방수 방식재는 오존의 산화력에 의해 열화되며 콘크리트까지 영향을 미쳐 내구성 저하의 원인이 된다. 본 연구에서는 내오존성 및 내화학성이 뛰어난 금속 패널을 기존의 시공법 보다 손쉬운 방법으로 시공하기 위한 방법으로 금속용사 공법을 이용하여 수처리 시설 콘크리트 구조물의 열화를 원천적으로 방지하기 위한 마감공법 개발 연구의 일원으로 용사금속 종류 및 피막의 표면처리 방법에 따른 내오존성 평가를 실시하였으며, 오존처리 후의 부착강도를 평가하였다. 실험결과 용사금속 Ti이 용사 후에도 내오존성이 뛰어난 것으로 나타났으며 표면처리 방법으로는 테프론계 봉공처리제를 사용하여 마감하는 것이 내오존성 및 부착성능 확보에 가장 적합한 방법이라 판단된다.

• 도시과학
• /
• 제8권2호
• /
• pp.41-45
• /
• 2019

The treatment method of leachate was increasing with the progress of science and technology, the management system was more perfect. The paper gathered so far the leachate treatment technology, including physical, chemical and biological treatment technology, and found the technology to be improved, the paper expounds the advantages and disadvantages of each method, applicable scope in the future, leachate treatment technology.

• 대한정형도수물리치료학회지
• /
• 제12권1호
• /
• pp.27-36
• /
• 2006

The purpose of this study was to compare the effects of Mulligan method and PNF method on the pain and limitation of range of motion in patients with frozen shoulder. The subjects of this study were 20 patients, 10(50%) males and 10(50%) females. They visited clinic for physical treatment within 6 months after onset of shoulder pain and limitation of range of motion with frozen shoulder. One group was applied with Mulligan method and other group was with PNF method. The patient were treated 5 times session weekly for 6 weeks from March 4th, 2002. And each treatment session was 15min. with physiotherapy. The pain was measured by visual analogue scale (V AS) and rage of motion (ROM) of flexion, abduction, external rotation, internal rotation were measured by goniometer. The data was analysed by paired T-test and independent T-test. The results of this study were summarized as follow : 1. The ROM of Mulligan method group increase in after treatment in comparison with ROM in before treatment, it is significant increase. Although the V AS of MMG decrease in before than after treatment, it is significant difference. 2. There is significant difference in before and after treatment of ROM of shoulder flexion, abduction, internal rotation, external rotation between PNF method group. The V AS of PMG is decreasing in before than after treatment, it is significant difference. 3. There is significant difference in before movement and after movement ROM of flexion, abduction, internal rotation, external rotation and VAS between Mulligan method session and PNF method session then the scale which measured by Mulligan method was more increased than that of PNF method. The results showed that both Mulligan method and PNF method were effective in pain reduce and ROM increase, but Mulligan method was superior to PNF method in ROM increase and pain reduce.

• 대한한방소아과학회지
• /
• 제14권2호
• /
• pp.169-184
• /
• 2000

A literature study was progressed for oriental medical treatment for atopic dermatitis. Atopic dermatitis is a chronic or chronically relapsing, pruritic dermatitis. In oriental medical treatment is classified into the treatment of inside(herb tea), treatment of outside(medicine for external application), treatment of inside & outside. The method of inside treatment is improving in health for the spleen and clearing wetness(健脾利濕), extinguishing wind and refreshing fever(消風淸熱), nourishing blood and making dryness gloss(養血潤燥). The method of outside treatment is refreshing fever and removing wetness(淸熱燥濕), counteracting the poison and getting rid of itch(解毒止痒), removing the boil and forming proud flesh(消腫生肌). The method of inside & outside is improving in health for the spleen and clearing wetness(健脾利濕), refreshing fever and getting rid of itch(淸熱止痒). refreshing blood and extinguishing wind(凉血祛風).

• 대한한의학회지
• /
• 제42권4호
• /
• pp.208-221
• /
• 2021

Objectives: The purpose of this article was to investigate the current status of clinical studies of acupuncture treatment for depression using neuroimaging method, focusing on SCI papers. Methods: We searched for clinical trial studies of acupuncture treatment for depression using neuroimaging method in the MEDLINE (Pubmed), OASIS, and RISS database. Once the online search was finished, studies were selected manually by the inclusion criteria. Finally, we analyzed the characteristics of selected articles and reviewed the neural substrates of acupuncture treatment in depression. Results: Total eight studies were included in this study. The most frequently utilized modality was functional MRI. The most frequently selected acupoint for depression was GV20. Several studies revealed that acupuncture treatment could improve the symptoms of depression. In this manuscript, we demonstrated that neuroimaging techniques could capture the neural substrates associated with depression and acupuncture treatment may modulate the activation of brain areas which were impaired in depression in a different way from sham acupuncture. Conclusions: Utilizing neuroimaging methods to explore neural mechanism of acupuncture treatment on depression would be helpful in clinical trials and more efforts should be needed in this fields.