• Title/Summary/Keyword: Treatement

Search Result 141, Processing Time 0.032 seconds

Fabrication of Tehermochromic Thin Films by the Sol-Gel Method (Sol-Gel법에 의한 Thermochromic 박막 제조)

  • 장원식;김석범;강승구;조동수
    • Journal of the Korean Ceramic Society
    • /
    • v.35 no.1
    • /
    • pp.11-16
    • /
    • 1998
  • $VO_2$ thin films have been prepared on borosilicate glass substrate using alkoxide method to characterize the effects of fabricating factors on thermochromic performance. The gel films formed by spin coating were converted to $V_2O_5$ phase during oxidizing heat-tratment and the $VO_2$ phase were formed by reducing heat-treatement. The thermochromic switching properties of $VO_2$ thin films are strongly affected by the crystal phase and microstructure and those could be controlled by reducing heat-treatment conditions. The ther-mochromic switching characteristics of $VO_2$ thin films synthesized were measured at IR (2.5$\mu\textrm{m}$) as the transition temperature of $63^{\circ}C$ the transition width of $3.6^{\circ}C$and the maximum and minimum transmittance of 84% and 14% respectively.

  • PDF

A study of profiles and annaealing behavior of As and Sb by MeV implantation in silicon (실리콘에 MeV로 이온주입된 AS 와 Sb의 profile과 열처리에 의한 이온의 거동에 관한 연구)

  • 정원채
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.35D no.3
    • /
    • pp.46-55
    • /
    • 1998
  • This stud demonstrates the profiles of heavy ions (As, Sb) in silicon by high energy (1~10 MeV) implantation. Implanted profiles were measured by SIMS (Cameca 4f) and compared with simulation results (TRIM) program and analytical description method using Pearson function). The experimental results have a little bit deviation with simulation data in the case of As high energy implatation. But in the case of Sb, the experimental results are in good agreement with TRIM data. SIMS profiles are perfectly fitted with a analytical description method only using one pearson function in Sb implantation. but in the case of As, fitted profilesshow with a little bit deviations by channeling effects of SIMS profiles. Thermal annealing for electrical activation of implanted ions was carried out by furnace annealing and RTA(Rapid Thermal Annealing). Concentration-depth profile after heat treatement were measured by SR(Spreading Resistance) method.

  • PDF

Association between the Brain-Derived Neurotropic Factor and Attention Deficit Hyperactivity Disorder (BDNF가 ADHD의 병인과 치료에 미치는 영향)

  • Kang, Na Ri;Song, Jae Min;Kwack, Young-Sook
    • Korean Journal of Biological Psychiatry
    • /
    • v.25 no.2
    • /
    • pp.21-30
    • /
    • 2018
  • Attention deficit hyperactivity disorder (ADHD) is a common childhood psychiatric disorder. Recently, it has been suggested that brain-derived neurotropic factor (BDNF) may play a role in the pathogenesis of ADHD. Our aim of this review is to understand the physiological functions of BDNF and its potential relationship with ADHD and therapeutic approaches of ADHD. Searches were conducted in Pubmed and Research Information Service System (RISS). In this review, we summarized important literatures for the physiological functions of BDNF in neurodevelopment, change of serum BDNF level in ADHD, association of BDNF polymorphism and ADHD and potential association of treatment of ADHD with serum BDNF level. Further studies are required to more clearly understand the source and the role of BDNF in ADHD and to develop BDNF based-ADHD treatement.

  • PDF

The Diagnostic importance of clinical and radiologic features of the Multiple Cemento-osseous dysplasia (다발성 백악질공이형성증 조직병리검사시 임상, 방사선양상의 중요성)

  • Han Mi-Ra;Kim Young-Hee;Kang Byung-Cheol
    • Journal of Korean Academy of Oral and Maxillofacial Radiology
    • /
    • v.28 no.1
    • /
    • pp.299-309
    • /
    • 1998
  • This case was diagnosed as multiple cementoosseous dysplasia on the basis of clinical & radiological features but was diagnosed as ossifying fibroma on the basis of histopathological feature. The histopathologic features of the multiple cementoosseous dysplasia and cementoossifying fibroma have common features of cementum, fibrous network and bone. Multiple cementoosseous dysplasia is reactive lesion and shows restricted lesion size, occurred on anterior and posterior tooth of the mandible and needs no treatement except periodic follow up. But Cementoossifying fibroma is the true neoplasm and grows continuously and needs surgical removal. The final diagnosis of the multiple cementoosseous dysplasia requires good correlation of the clinical, histopathological, and radiological features.

  • PDF

Studies on Production of Monoclonal Antibodies Reactive with T-Cell Leukemia (인형 T세포 백혈병에 대한 단세포군 항체 생산에 관한 연구)

  • 서병석;김원배;최응칠;김병각
    • YAKHAK HOEJI
    • /
    • v.31 no.5
    • /
    • pp.253-265
    • /
    • 1987
  • To develop hybridomas secreting monoclonal antibodies to be used as unlimited sources of reagents indispensable for the diagnosis and treatement of leukemic malignancy, a monoclonal antibody was generated to human pre-T leukemia cells (Jurkat). Hybridomas were produced against Jurkat cell line by fusing spleen cells from hyperimmunized mice with murine plasmacytoma cells (P3$\times$63Ag8. V653). One monoclonal antibody derived from this fusion, designated DMJ-2 was reactive with T-cell lines (Jurkat, Molt-4 and RPMI-8402) and normal peripheral E-rosette forming T cells, but unreactive with B-cell lines (Daudi, Nalm-6) and non-T, non-B cell line (K562). Conclusively DMJ-2 reactive with mature and immature T-lineage lymphoid cells.

  • PDF

Preparation and Evaluation of Chitin Derivatives and Their Utilization for Waste-water Treatement

  • Aly, Aly Sayed;Jeon, Byeong-Dae;Kim, Young-Jun;Park, Yun-Heum
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 1996.10a
    • /
    • pp.53-58
    • /
    • 1996
  • The Chitin Thiocarbonate-Fe(II)-H2O2 redox initiator system was investigated for the graft copolymerization of acrylonitrile(AN) and acrylic acid(AA) monomers onto chitin powder. The reactions with vinyl monomers onto chitin were carried out under various the graft copolymerization conditions to elucidate the polymerization behavior in terms of graft yield. Reactions of chitin-acrylonitrile graft copolymer with hydroxyl amine hydrochloride and those with sodium hydroxide were conducted in order to obtain chitin-(amidoxime-co-acrylonitrile) and chitin-(acrylate-co-acrylamide) graft copolymers, respectively. The reaction efficiency was observed to depend on the alkali concentration, time, temperature, and the reactant concentrations. The prepared chitin derivatives were evaluated to find potential applications for use in wastewater treatments for adsorption and desorption of heavy metal ions as well as acidic and basic dyes.

  • PDF

Surgical treatement of complex cardiac malformations (복잡심기형의 외과적 치료)

  • 조형곤
    • Journal of Chest Surgery
    • /
    • v.19 no.1
    • /
    • pp.122-133
    • /
    • 1986
  • Thirteen patients with cyanotic cardiac malformations having more complex intracardiac defects, hemodynamics and operative procedures than ones in Tetralogy of Fallot undertaken total surgical corrections from July 1981 to August 1985. The cases of corrective surgery for complex cardiac malformations were 3.9% of all congenital cardiac malformations and 12.6% of cyanotic cardiac malformations. Six patients died within 30 days after surgery. So operative mortality was 46%; Transposition of the great arteries, two of 4 patients, due to low cardiac output syndrome and tracheal bleeding ; Univentricular heart, one of 3 patients, due to bleeding; Corrected transposition of the great arteries, one of 2 patients, due to acute heart failure; Tricuspid atresia, one of 2 patients, due to low cardiac output syndrome; Double outlet right ventricle, one of single patient, due to respiratory failure. The cases of surgical correction for complex cardiac malformations are progressively increasing in numbers. The more accurate evaluation of anatomical condition and hemodynamics in preoperative diagnosis, studies on applicable surgical procedure and perioperative care of patients are necessary in the improvement of clinical and surgical results.

  • PDF

Effect of Growth Regulators, Genotypes and Cutting Position on Rooting and Root Growth of Chrysanthemum zawadskii H. (九折草 揷穗로부터 發根 및 根生長에 미치는 생장조절물질, 九折草 種 및 揷穗位置의 효과)

  • 김정률;유창연;조동하
    • Korean Journal of Plant Resources
    • /
    • v.11 no.3
    • /
    • pp.353-357
    • /
    • 1998
  • This study was conducted to determine the effect of growth regulators, genotype, and cutting position on the rooting and root growth from cutting of Chrysanthemum zawadskii H.. Rooting rate of Keungugeolcho in the treatement of IBA 500 and 1000 ppm was the better than those of other treatments of IAA, NAA and Rooton. Rooting rate differed depending on the genotype. Hangryobonggugeolcho was better than Keungucheolcho in rooting rate. The treatment of rooton remarkably induced many roots from the cuttings of eight accessions of Chrysanthemum zawadskii H.. Also, rooting rate and number of root differed depending on cutting position. When cuttings including shoot tip were cultured on tray containing bed soil, rooting rate and number of root induced from cuttings with shoot tip was higher than when cuttings without shoot tip and with lateral axillary bud were cultured.

  • PDF

Effectof natural type ABA foliar application on growth, yield of Codonopsis lancelata (天然型 ABA의 葉面散布가 더덕의 生長, 收量에 미치는 影響)

  • 김학현
    • Korean Journal of Plant Resources
    • /
    • v.11 no.3
    • /
    • pp.301-306
    • /
    • 1998
  • In order to improve cultivation technuque of C. lanceolata, natural ABA was treated with foliar application periodically during differenctitation of node. The higher is concentration and the earier its foliar application was, the shoter plant height was. Especially, when $10mg;.L{-1}$ of ABA was treated at differentiated stage of 3rd node, plant height was inhibited to 60% of control. But leaf length, leaf width, and number of branches have no significant differnence in comparison wiht control. The fresh weight of subterranean part was similar to control independent of treat-time in the case of $10mg;.L{-1}$. When 1,5 and $10mg;.L{-1}$ of ABA were treated at initial differentiated node stage, plant height inhibited to 20~30% of control, but subterranean part was similar to control. All treatement showed slight antitumor activity by the P388 cytotoxic screening test.

  • PDF

Turning and Metalic Characterization for CAM Shaft Materials of Diessel Engine (디젤 엔진용 캠축 소재의 금속적 특성 및 선삭 가공 특성에 관한 연구)

  • Chae, W.S.;Kim, K.W.;Kim, D.H.
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.14 no.7
    • /
    • pp.22-28
    • /
    • 1997
  • In this paper, We have studied internal quality incluiding chemical compositions, microscopic structure and nonmetalic inclusion of test material. We have analyzed dynamic characteristics of cutting resistence and compared chip treatment of the test material. In analyzing internal quality, all of the test material have typical ferrite+pearlite structure. But, nonmetallic inclusion has oxide and sulfide inclusion has oxide and sulfide inclusion in medium carbon steel, mainly sulfide inclusion is existed in S-free cutting steel. In Ca+S-free cutting steel, calcium aluminate and sulfide complex inclusion, had low-melting point, as deformation of sulfide and oxide inclusion is existed. Machining characteristics, cutting resistence is maximum in medium carbon steel. Chip treatement are excellent in S-free cutting steel, similar to the Ca+S free cutting steel and medium carbon steel.

  • PDF