• 수산해양기술연구
• /
• 제57권1호
• /
• pp.1-9
• /
• 2021

Trawl fishing is a fishing method in which a large, motorized trawler tows a bag-shaped net to catch fish living at the bottom or middle layers. For a trawl gear, it is of utmost importance to select the gear size and towing speed suitable for the effective horsepower (EHP) of the trawler in the design stage. In general, the power required to move an object is proportional to the product of the object speed and resistance; therefore, there are various choices for the gear resistance and towing speed given the effective horsepower of the trawler. However, there have been few studies on the gear design of an appropriate scale for the towing speed given the effective horsepower of the trawler. In this study, the resistance and shape of three types of midwater trawl gears were analyzed using SimuTrawl, a computer simulation tool. In addition, the relationship between the propulsion force and speed of the ship was clarified when the size and effective horsepower of the trawler were determined. Finally, we suggested the relationship between the towing speed and the resistance of the gear when the trawler towed the net was investigated, and a specific method of selecting the gear size according to the towing speed.

• 수산해양기술연구
• /
• 제48권4호
• /
• pp.360-369
• /
• 2012

The main purpose of this study is to analyse economic feasibility of low-carbon-oriented trawl gear. The results of benefit/cost analysis showed that use of the low-carbon fishing gear is economically feasible. Considering the fuel saving and relatively low $CO_2$ emission by reducing the resistance of gear, net present value by such gear improvement was estimated about 2,430~2,853 million won with the benefit-cost ratio 1.65~1.84 and the internal rate of return 29.18~30.48 percent. Development of low-carbon trawl gear would render significant contributions to reducing $CO_2$ emission in fishing operations and lead to reduce fishing costs due to fuel savings.

• 수산해양기술연구
• /
• 제59권4호
• /
• pp.344-353
• /
• 2023

In the actual sea, the additional resistance due to external force such as wind, current and wave is accompanied, and the required power is added in response to these resistance. Especially when the ship is sailing at low speed, the effects of wind and current have a great impact on the safe control of the ship. Likewise, it is thought that the effects of wind and current have a great impact on the trawl ship control since the towing speed of a bottom trawl ship is a low speed of 3 to 4 knots. If the reduce of ship speed and the increase of engine power due to the influence of wind and current can be identified, the safe towing power can be calculated based on a given engine output. Thus, the appropriate size of a fishing gear can be determined. In this study, a total of 20 trawl operations were conducted for seasonal maritime research in the same research area according to the operation mode of propeller. Based on navigation data, trawl fishing data, and engine performance data acquired during the towing fishing gear, and data of ship speed, hull resistance, fishing gear resistance, wind force and current force according to an incidence angle were estimated. The overall power for these loads was calculated and compared with the measured engine power, and the effects of wind force and current force on the engine power were investigated.

• 수산해양기술연구
• /
• 제53권2호
• /
• pp.115-125
• /
• 2017

Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear in fishing operation is generally related to hydrodynamic resistance on the gear. This research is to propose a low drag generated midwater trawl in terms of the gear design improvement using simulations. The results from the simulation were verified with results that mirrored the model experiments. From the results, the resistance force of the proposed gear decreased to 29% compared to that of the current gear. Furthermore, the gear performance also improved with increased gear mouth compared to the current one. Therefore, the proposed gear will be helpful to reduce the greenhouse gases from fishing operation. It will also contribute to the fishing industry by saving fuel.

• 수산해양기술연구
• /
• 제44권2호
• /
• pp.120-128
• /
• 2008

Estimation of the gear shape and cross section of sweep at mouth of a bottom trawl net was described and applied to the field experiments obtained with the Scanmar system. The shape of the trawl net from wingend to the beginning of codend was assumed to be part of an elliptic cone of which the cross section was ellipse, and that of the float rope be of form $y_f=a_fx^{bf}$. In case of a bottom trawl with warp 180m long, the radius of ellipse, the cross section of sweep at mouth, the eccentricity of the ellipse, the inclination angle of float rope and the contribution of the side panel to net height were estimated in accordance with towing speed. The horizontal radius of the upper ellipse increased with increasing towing speed, the eccentricity of it became slightly bigger as increasing the towing speed which meant the shape of it being flat. And the inclination angle of the float rope was about between 7 and 12 degrees in case of the above bottom trawl.

• 수산해양기술연구
• /
• 제44권1호
• /
• pp.10-19
• /
• 2008

This paper focuses on the mackerel's visual ability and swimming capability, and aims to describe the behavior in capture and escape process by trawl. The visual sensory systems and reaction behavior based locomotory capability were analyzed and simulated. The ability of fish to see an object depends on the light intensity and the contrast and size of the object. Swimming endurance of the fish is dependent on the swimming speed and the size of the fish. Swimming speeds of the fish are simulated 3 types of the burst speed, the prolonged speed and the sustained speed according to the time they can maintain to swim. The herding and avoiding is typical reaction of the fish to the stimuli of trawl gear in the capture process. These basic behavior patterns of the virtual mackerel to the gear are simulated. This simulation will be helpful to understand the fishing processes and make high selectivity of fishing.

• 수산해양교육연구
• /
• 제16권1호
• /
• pp.124-141
• /
• 2004

This study focuses on the off-shore trawl fishery, specifically on its restructuring and new regulations governing its operation since the 1990s. This fishery has an important role in terms of fishing capacity and production amount and is dependent on close diplomatic relations with adjacent fishing countries. The off-shore trawl fishery has been shrinking since the 1990s. In addition to a decrease in stock and an increase in imports, there are vessel buyback programs and a decrease in fishing grounds related to a tri-lateral agreement among Korea, China and Japan which have sped up the shrinking of the fishery. In this processing, costs exceed the increase of revenue. Excess investments in fishing gear and salary for crews have lowered profits in this fishery. Considering the above, the off-shore otter trawl fishery should stop increases in production and restructure the fishery by coordinating fishing gear restrictions and fishing areas, and down-sizing management capacity.

• 수산해양교육연구
• /
• 제6권1호
• /
• pp.11-19
• /
• 1994

The North Pacific midwater trawling which is one of the important fishing methods for Korean fishing industry is working in the Bering Sea and the sea near Kamchaka Peninsula. The catch by Korean midwater trawlers had been recorded about 300 thousands $^{M/_T}$ a year. Six types of midwater trawl net-ordinary midwater trawl net, super-V trawl net, super mesh trawl net, rope trawl net, super plus trawl net and kite trawl net-have been widely used by large trawlers above 1,500gt in size since 1982. Regarding the fishing efficiency, the super plus trawl net and kite trawl net were acknowledged as higher than other nets. Maximum mesh size of super-plus trawl net and kite trawl net ranges about 20m, whereas the length of net about 150m, and high-tech polyethylene is used as the material of rope part. The problems involved in the North Pacific midwater trawl net may be summarized as follows ; (1) The dimension of fishing gear is too big compared with the towing power of trawler. (2) The mesh size of the rope part is too big compared with that of the common netting part. (3) The net is often torn out in the connecting position of the rope part and the netting part. (4) The net is not matched with the trawler and the otter board in many trawlers, so the shape of the trawl gear in the water is instable. (5) The fish school located near head rope, ground rope and side rope in the net recorder is not caught in practice because of the net instability.

• 수산해양기술연구
• /
• 제36권4호
• /
• pp.274-280
• /
• 2000

본 연구는 실습선에서 사용 중인 6폭짜리 저층트롤 어구의 저항을 끌줄의 길이와 예망 속도별로 분석하기 위하여 그물의 저항과 전개판의 저항을 계측하고, 어구의 저항계수를 산정하였으며, 그 결과를 요약하면 다음과 같다. 1. 시험 어구의 저항은 끌줄의 길이가 길수록 증가하나, 저항 R$\sub$t-w/=3800v$^2$으로 대표할 수 있다. 2. 그물 어구의 저항은 끌줄의 길이에 따라 다소 증가하나, 그물 어구의 저항 R$\sub$n/=10R$\sub$n/=10d/lλ$\sub$a/λ$\sub$b/v$\^$1.3/의 식으로 대표할 수 있다. 3. 시험 어구의 전개판의 저항 R$\sub$b/=1810v$\^$0.8/으로 대표할 수 있다. 4. 끌줄의 길이별로 측정된 저항값과 Koyama의 저항식과 비교하면, 예망속도가 작을 때는 시험 어구의 저항이, 예망속도가 클 때는 Koyama의 저항식에 의한 저항값이 크게 나타났다.

• 수산해양기술연구
• /
• 제48권3호
• /
• pp.195-207
• /
• 2012

Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear during fishing operation is generally related to hydrodynamic resistance on the gear. This research demonstrates a new approach using numerical methods to reduce fuel consumption. The results from the simulation were verified with results that mirrored the model experiments. By designing the fishing gear using drawing software, the whole and partial resistance force on the gear can be calculated as a result of simulations. The simulation results will suggest suitable materials or gear structure for reducing the hydrodynamic forces on the gear while maintaining the performance of the gear. Furthermore, the efficiency of low energy used trawl as economic point of view will be dealt. This research will helpful to reduce the GHG emissions from fishing operations and lead to reduce fishing costs due to fuel savings.