• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.174-183
• /
• 2000

Non-Parallelism the axial direction occurs during grinding process of long slender shafts. The reason for the axial error is due to elastic deformation of the components, accumulation phenomenon of the grinding and wheel wear during the grinding process. The accumulation phenomenon, the size generation mechanism and the wheel wear process during traverse grinding result in complicated process at each step on the wheel surface. The grinding system stiffness obtained from the stiffness of the center on the tailstock and the workpiece varing according to the relative position of the wheel and the workpiece. Further more, the value of wheel wear increases as the grinding process advances. The above mentioned issues make the shape generation process during traverse grinding quite complicated. This research analyzes the shape generation process in the direction of the work spindle. First, the formulation of the grinding system stiffness was conducted and the simulation analysis method of the traverse grinding was established. Also, a measuring system for assessing the dimensinal accuracy of the workpiece has been developed.

• 동력기계공학회지
• /
• 제15권2호
• /
• pp.61-68
• /
• 2011

This paper investigates the tensile properties of the friction stir welded joints of Al 7075-T651 aluminum plate according to the welding conditions. A 7075-T651 aluminum alloy plate with a thickness of 6.0 mm was used in this investigation. For the friction stir welding (FSW) process, a tool with shoulder diameter of 20 mm and probe diameter of 9 mm was used. The rotation speed and traverse speed conditions were changed in this study, the other welding conditions are constant. The welding direction was aligned with the material rolling direction, and dimension of the FSW plate were $250{\times}100{\times}6\;mm$. As far as this work is concerned, the optimal FSW conditions are determined as the rotation speed, 600 rpm and traverse speed 0.8 mm/sec or the rotation speed, 800 rpm and traverse speed 0.5 mm/sec.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.323-327
• /
• 1995

A new air knife system for coating thickness control in hot dip galvanizing process had been developed and installed on the CGL in Pohang Steel Works, POSCO. This new system consists of air knives with remotely adjustable nozzle slot and an automatic control system which can control both longitudinal and traverse coating deviations. Based on the optimal control algorithm, a traverse coating deviation control was designed. The controller controls the lip profile of the air knives with flexible structure according to the deviation of coating weight. From the measured values which are dependent on the strip width, the lip gaps are calculated with optimal algorithm and the model of the coating deviation. Time delay between knives and a coating thickness gauge is solved by the Smith Predictor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.104-111
• /
• 2009

This paper shows the behaviors of macro- and micro-structures and mechanical properties for specimen's welding region welded by FSW. according to welding conditions with 5mm thickness aluminum 5083O alloy plate. It apparently results in defect-free weld zone in case traverse speed was changed to 32 mm/min under conditions of anti-clockwise direction and tool rotation speed such as 800 and 1250 rpm with tool's pin diameter of 5 ${\Phi}mm$ and shoulder diameter of 20 ${\Phi}mm$, pin length of 4.5 mm and tilting angle of $2^{\circ}$. The ultimate stress of ${\sigma}_T=331$ MPa and the yield point of 147 MPa are obtained at the condition of the travel speed of 32 mm/min with the tool rotation speed of 1250 rpm. There is neither voids nor cracks on bended surface of $180^{\circ}$ after bending test. The improvement of toughness after impact test was found. The lower rotating and traverse speed became, the higher were yield point, maximum stress and elongation(%) with the stresses and the elongation(%) versus the traverse speed diagram. Vickers hardness for cross section of welding zone were also presented. The typical macro-structures such as dynamically recrystallized zone, thermo-mechanically affected zone and heat affected zone and the micro-structures of the transverse cross-section were also showed. However, the author found out that the region of 6mm far away from shoulder circumference was affected by friction heat comprehensively, that is, hardness softened and that part of micro-structures were re-solid-solution or recrystallized, the author also knew that there is no mechanically deformation on heat affected zone but there are the flow of plastic deformation of $45^{\circ}$ direction on thermo-mechanically affected zone and the segregation of Al-Mg on nugget. The solid solution wt(%) of parent material as compared against of friction stir welded zone was comprehensively changed.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.867-874
• /
• 2010

RFID printing technology has emerged recently as an important tool for leading future IT. Therefore, many manufacturers concerning on low cost and mass production of the related products pay close attention to the printing technology. In order to realize printed electronics, the technologies for fine line-width/gap printing and registration are essential work. This study proposes a precise Roll to Roll control system that is capable of tilting two posts. Two controllable tilting posts can adjust film position at traverse direction for the precision registration. A mathematical model for representing the geometric features of each posts in Roll to Roll printing system is established first. Then an operating program is built to implement the system and to control film movement. For experimental test, a hard ware system is fabricated which is consisted of two AC servo motors, two posts tilting mechanisms, several guide rolls, and so on. The test results show the proposed system can control the film position precisely at transverse direction.

• 자원환경지질
• /
• 제16권1호
• /
• pp.11-18
• /
• 1983

Gyeongsang Basin in the southeastern part of the Korean peninsular is characterized by many fault systems. To decipher the geotectonical evolution of the Korean peninsular and marginal basins in her adjacent areas it is prerequisite to understand the spatial distribution pattern and mutual relationships of these fault systems. Because of difficulties in finding any criterion to recognize the faults in field, their extension and mutual relationships in ages are not very clear yet. As an attempt to find geophysical criteria to recognize the fault, geoelectrical resistivity survey was carried out in this study. With the Wenner configuration four resistivity soundings and twenty seven resistivity profilings were done. The electrode distance used was up to 50m. From the results of the resistivity soundings and boring data of earlier groundwater investigations the depth of alluvial and weathered zone was established to be at most 20m in the study area. In the resistivity profiling low resistivity anomaly zones are detected on every traverse, which are interpreted as caused by fractures, fault clays and mylonites in the fault zone. The width of the fault zone amounts to 0.3-1km. By correlating and connecting the negative anomaly zones from traverse to traverse one can determine the trend of th of the faultzone and therefore that of fault itself. The recognized fault trend in this way was $N15^{\circ}-20^{\circ}E$ and this coincides with the direction of the inferred fault line from earlier geological surface mapping. With the help of this characteristical negative anomaly the existance of another $N80^{\circ}W$ trending fault was estabished. This study has shown that geoelectrical resistivity survey can be applied successfully to the problem of tracing fault line insofar as a fault zone has been developed along fault line.

• 수산해양기술연구
• /
• 제52권4호
• /
• pp.308-317
• /
• 2016

The tail flip of the decapod shrimp is a main feature in escaping behavior from the mesh of the codend in the trawl. The characteristics of tail flip in target prawn was observed and analyzed in a water tunnel in respect of flow condition and mesh penetration by a high speed video camera (500 fps). The tail bending angle or bending time in static water was significantly different than in flow water (0.7 m/s) and resultantly the angular velocity in static water was significantly higher than in flow water when carapace was fixed condition. When escaping through vertical traverse net panel in water flow the relative moving angle and relative passing angle to flow direction during tail flip, it significantly decreases the number of shrimps escaping than the case of blocking shrimp. The bending angles of tail flip between net blocking and passing through mesh were not significantly different while the bending time of shrimp passing through mesh was significantly longer than when shrimp blocking on the net. Accordingly the angular velocity of passing through mesh was significantly slower than blocking on the net although the angular velocity of the tail flip was not significantly related with carapace length. The main feature of tail flip for mesh penetration was considered as smaller diagonal direction as moving and passing angle in relation to net panel as right angle to flow direction rather than the angular velocity of tail flip.

• 디지털융복합연구
• /
• 제7권3호
• /
• pp.137-146
• /
• 2009

This paper aims to propose a framework of content creating group with creativity under new convergence environments. The framework is built based on content concept hierarchy(deep/surface) relating with the creativity of group members. The diversity of group members(potential creativity) decrease and change into creative abilities in one unified view at each content concept hierarchy in time. To do this, three methods of building a creative group(interaction-base, direction-base, hybrid) are proposed. Cooperating processes and operators are designed to promote creative abilities in the content producing group. These cooperations are considering new media convergence industry's job road map(IPTV) and fundamental content attributes(semantic, narrative, discourse). In the framework, creative content is produced with the help of member's cultural openness, media richness and synchronicity, hierachical adaptability on dissimilarity. Deep level creativity of cognitive semiotics on moving image content is composed of psychological, transformational, situational creating abilities in the structure of group members. Designing analogy, metaphor, symbol operators help members to traverse deep structure of content concept hierarchy. Our framework has strong points to relate fundamental content deep structure with structure of content producing group and to induce creativity on cognitive structure of human being.

• 자원환경지질
• /
• 제29권6호
• /
• pp.739-744
• /
• 1996

Kite는 조사지역을 한번 횡단함으로써 3차원 지하영상을 얻기 위한, 새로이 개발된 단일채널(single-channel) 탄성파 취득시스템이다. Kite시스템은 진행방향에 수직으로 전개되는 하이드로폰(hydrophone)과 하이드로폰의 한쪽 끝에 설치하는 에너지원(source)인 에어건(air-gun)으로 구성된다. 3차원 지하영상은 기존 다중채널 반사자료 처리방법을 사용하며, 공통 소스점 모음(CSS gather)을 딕스식을 이용하여 지하층들의 평균 구간속도를 구하게 된다. 이 구간속도와 정규 고결응력으로 부터 물리상수들을 선택적으로 이용하여 전단계수, 공극율, 횡파속도 등을 구하였다. 본 시스템은 북대서양의 대륙붕에서 실시되었으며 좋은 결과를 얻을 수 있었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.330-334
• /
• 2011

자연하천의 유량값은 일반적으로 횡단면의 면적과 이를 통과하는 유속의 곱으로 산정된다. 유량측정 방법은 하천의 형태와 저 평수기 및 홍수기의 수위에 따라 도섭법, 교량법, 부자법 및 보트를 이용한 ADVM 측정법 등 다양한 방법으로 실시된다. 그러나 현장 여건에 따라 흐름에 직각이 아닌 사교에서 측정이 이루어지는 경우에는 단면적의 오차를 포함할 가능성이 크기 때문에 횡단면의 측선 각도에 따라 각보정을 실시해야 한다. 현재 사교에서 유량 측정을 실시하는 경우, 흐름의 직각을 기준으로 처짐각을 측량하여 각 측선에 $cos{\theta}$를 적용하여 단면적을 보정하고 있는데, 이 처짐의 정도가 유량의 참값에서 어느 정도의 영향을 미치는지에 대한 검토가 요구된다. 본 연구에서는 한강수계 왕숙천에 위치한 퇴계원 지점에서 실시간 수위에 따른 유속을 측정하였으며, 횡단면에 직각인 측선을 기준값으로 제시하고, 처짐각의 정도를 $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, $40^{\circ}$, $50^{\circ}$까지 늘려 산정된 유량값을 기준값과 비교 분석하였다. 본 연구에 쓰인 측정기기는 Price AA 유속계이고, 측정방법으로는 유량의 흐름 방향을 기준하여 직각으로 수면에서 0.6d 지점의 유량측정방법(1점법)을 적용하였다. 그 결과 유량의 흐름 방향을 기준하여 직각인 경우 $1.39m^3/s$의 유량에서 보정 전 각 $10^{\circ}$의 유량 $1.36m^3/s$, $30^{\circ}$의 유량 $1.49m^3/s$, $50^{\circ}$의 유량 $2.25m^3/s$로 각이 클수록 단면적이 크게 나타나며 유량 역시도 과대 산정됨을 알 수 있었다. 따라서 도섭법을 이용한 유량측정이나 사교에서의 교량법 등을 적용하여 유량측정을 실시할 경우 유량의 흐름방향을 기준으로 직각으로 유량측정을 실시하여 유량을 산정하되 부득이한 경우로 사교에서의 측정이 이루어 졌을 시 흐름 방향을 기준으로 각도를 측정하여 크게 나타나는 단면적에 처짐각을 보정하여 유량을 산정함이 오차를 줄일 수 있으며, 신뢰성 있는 유량자료 생산의 방법이 라 할 수 있겠다.