• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.26-36
• /
• 2001

Smart sensors and actuators have recently been developed. In this study, first, small-diameter fiber Bragg grating (FBG) sensors developed by the author, whose cladding and polyimide coating diameters were 40 and $52{\mu}m$, respectively, were embedded inside a laminate without resin-rich regions around sensors and the deterioration of mechanical properties of the composite laminate. The small-diameter FBG sensor was embedded in $0^{\circ}$ ply of a CFRP laminate for the detection of transverse cracks in $90^{\circ}$ ply of the laminate. The reflection spectra from the FBG sensor were measured at various tensile stresses. The spectrum became broad and had some peaks with an increase of the transverse crack density. Furthermore, the theoretical calculation reproduced the change in the spectrum very well. These results show that the small-diameter FBG sensors have a potential to detect the occurrence of transverse cracks through the change in the form of the spectrum, and to evaluate the transverse crack density quantitatively by the spectrum width. On the other hand, shape memory alloy (SMA) films were used to suppress the initiation and growth of transverse cracks in CFRP laminates. Pre-strained SMA films were embedded between laminas in CFRP laminates and then heated to introduce the recovery stress in SMA films and compressive stresses in the weakest plies ($90^{\circ}$ ply). The effects of recovery stresses are demonstrated in the experiments and well predicted using the shear-lag analysis and the nonlinear constitutive equation of SMA films.

• Structural Engineering and Mechanics
• /
• 제67권2호
• /
• pp.165-173
• /
• 2018

A simple predicted model using a modified Shear-lag method was used to represent the moisture absorption effect on the stiffness degradation for $[0/90]_{2s}$ composite laminates with transverse cracks and under flexural loading. Good agreement is obtained by comparing the prediction model and experimental data published by Smith and Ogin (2000). The material properties of the composite are affected by the variation of temperature and moisture absorption. The transient and non-uniform moisture concentration distribution give rise to the transient elastic moduli of cracked composite laminates. The hygrothermal effect is taken into account to assess the changes in the normalised axial and flexural modulus due to transverse crack. The obtained results represent well the dependence of the stiffness properties degradation on the cracks density, moisture absorption and operational temperature. The composite laminate with transverse crack loaded in axial tension is more affected by the hygrothermal condition than the one under flexural loading. Through this theoretical study, we hope to contribute to the understanding of the moisture absorption on the composite materials with matrix cracking.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.484-489
• /
• 2002

테이프 캐스팅된 알루미나/지르코니아 또는 뮬라이트/지르코니아를 표면층으로 알루미나/지르콘(소결시 반응결합 뮬라이트/지르코니아 유도)을 내부층으로 적층하고 고온가압소결함으로써 층상 복합체를 제조하였다. 소결체에서 다양한 형태의 균열을 관찰 할 수 있었으며, 이는 주로 표면층으로의 횡단균열(channel crack, 계면에 수직방향으로 전파되는 균열), 중간층 내에서의 종단균열(transverse crack, 계면에 거의 평행한 방향으로 전파되는 균열)과 증간사이를 분리시키는 계면균열(interface crack, 계면을 따라 전파되는 균열)들로 구성되어 있었다. 이러한 균열들은 층을 이루는 복합산화물간의 열팽창계수의 차이에 의해 형성된 것으로 여겨졌다. 특히, 표면층을 뮬라이트/지르코니아로 적층하였을 경우 층간 계면에 평행한 균열과 중간층 내로의 종단균열이 생성되었으나, 알루미나/지르코니아로 하였을 경우는 이러한 균열이 확인되지 않았다. 한편, 압흔하중에 의한 적층체의 잔류응력 역시 표면층의 종류에 따라서 상이한 양상을 나타내었다.

• 한국철도학회논문집
• /
• 제17권5호
• /
• pp.355-364
• /
• 2014

연속철근 콘크리트궤도에서는 온도 및 수분 변화에 따른 구속응력에 의해 횡균열이 발생한다. 이러한 균열은 연속철근 콘크리트궤도의 거동과 장기 공용성에 상당한 영향을 미치는 것으로 알려져 있다. 이와 같은 횡균열이 콘크리트궤도의 거동에 미치는 영향을 분석하고 균열 관리 기준을 보다 합리적으로 결정하기 위해, 이 연구에서는 연속철근 콘크리트궤도에 열차하중이 작용할 때 균열이 발생한 궤도 슬래브(TCL)와 기층(HSB)의 응력 분포를 3차원 유한요소해석 모델을 이용하여 예측하였다. 해석 결과에 따르면 균열 깊이가 증가할 경우 TCL의 휨응력과 TCL-HSB 경계부 수직응력이 증가하고, 균열이 슬래브를 관통할 경우 TCL 균열부에서 철근 주변에 국부적으로 수직 응력이 커져 장기적으로 펀치아웃 발생 가능성이 커질 수 있다. 반면 균열폭과 간격의 영향은 균열 깊이에 비해 크지 않은 것으로 나타났다. 따라서 균열폭과 간격만 관리하는 것보다는 균열 깊이를 동시에 관리할 필요가 있다. 또한 HSB 수축 줄눈의 위치를 침목 사이에 위치하도록 하는 것이 장기 공용성 확보에 더 유리하다.

• Advances in aircraft and spacecraft science
• /
• 제6권4호
• /
• pp.315-331
• /
• 2019

The stiffness degradation of the cross-ply composite laminates containing a transverse cracking and delamination in $90^{\circ}$ layer is predicted by using a modified shear-lag model by introducing the stress perturbation function. The prediction shows better agreement with the experimental results published by Ogihara and Takeda 1995, especially for laminates with thicker $90^{\circ}$ plies in which extensive delamination occurs. A homogenised analytic model for average transient moisture uptake in composite laminates containing periodically distributed matrix cracks and delamination is presented. It is shown that the model well describes the moisture absorption in a cross-ply composite laminate containing periodically distributed transverse matrix cracks in the $90^{\circ}$ plies. The obtained results represent well the dependence of the stiffness degradation on the crack density, thickness ratio and moisture absorption. The present study has proved to be important to the understanding of the degradation of the material propertiesin the failure process when the laminates in which the delamination grows extensively.

• Steel and Composite Structures
• /
• 제28권4호
• /
• pp.495-508
• /
• 2018

In this paper, the effect of matrix cracks on the buckling of a hybrid laminated plate is investigated. The plate is composed of carbon nanotube reinforced functionally graded (CNTR-FG) layers and conventional fiber reinforced composite (FRC) layers. Different distributions of single walled carbon nanotubes (SWCNTs) through the thickness of layers are considered. The cracks are modeled as aligned slit cracks across the ply thickness and transverse to the laminate plane, and the distribution of cracks is assumed statistically homogeneous corresponding to an average crack density. The first-order shear deformation theory (FSDT) is employed to incorporate the effects of rotary inertia and transverse shear deformation, and the meshless kp-Ritz method is used to obtain the buckling solutions. Detailed parametric studies are conducted to investigate the effects of matrix crack density, CNTs distributions, CNT volume fraction, plate aspect ratio and plate length-to-thickness ratio, boundary conditions and number of layers on buckling behaviors of hybrid laminated plates containing CNTR-FG layers.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.263-265
• /
• 2003

The transverse crack, a type of cold crack, occurs perpendicular to the axis of the weld interface, longitudinal residual stresses ($\sigma$k direction) are more important in transverse crack occurrence from my own experience. Specimens were fabricated and welded under actual construction conditions, and then residual stresses of longitudinal stresses were measured for different welding conditions with SAW and FCAW process. The residual stress values for the specimen welded Interpass temperature below 30$^{\circ}C$ was higher than the specimen welded interpass temperature of 100～120$^{\circ}C$. And also the residual stress values for a specimen measured at weld surface, as welded condition, was higher than that of longitudinal residual stresses that was measured from a small test piece, due to the residual stress was relieved in the process of the cutting and machining. Transverse weld cracks were detected in the area of the maximum residual stresses both SAW and FCAW process.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.633-636
• /
• 1998

The use of concrete pavements is increasing by virtue of durability and excellent load resisting capacity. But cracks and demage in concrete pavements may be occurred by continuous reciclic load, as time goes by. Therefore, transverser contraction joints are constructed in concrete pavements to relieve tensile stresses, and when properly spaced they control the location of transverse cracks.

• Composites Research
• /
• 제13권3호
• /
• pp.9-20
• /
• 2000

모든 층을 한 방향으로 적층하여 횡방향 굽힘과 축방향 인장운동이 연성되어 나타나는 복합재료 외팔보에 다중횡방향 개구형 크랙이 있는 경우에 대하여 자유진동 특성을 고찰하였다. 모든 크랙 위치에서의 파괴역학적 특성을 스프링 상수로 변환하여 산출하고 크랙사이 구간의 보를 전단변형 및 회전관성효과를 포함하여 해밀톤 원리로부터 운동방정식 및 경계조건을 유도하고, 라플라스 변환법을 사용하여 자유진동 특성에 관한 해를 구하였다. 복합재료의 설계 변수로서 섬유 체적비와 적층각을 설정하였으며, 크랙의 외형적 변수로서 크랙의 갯수, 분포 위치 및 크랙 깊이를 설정하여 이들 변수에 대한 고유진동수 및 모드형상의 변화 경향을 도출함으로써 임의의 다수 크랙이 분포되어 있는 보다 실제적인 상황에서의 진동변화에 근거를 둔 비파괴 검사가 이루어질 수 있는 방안에 대하여 연구하였다. 해석 결과 복합재료 보에 단일 크랙이 있는 경우에 비해 다중 크랙이 있는 경우가 여러 가지 변수에 대해 훨씬 복잡한 형태로 나타나고 있음을 보여준다.

• Structural Engineering and Mechanics
• /
• 제52권5호
• /
• pp.1019-1032
• /
• 2014

Rails are key elements in railway superstructure since these elements receive directly the train load transmitted by the wheels. Simultaneously, rails must provide effective stress transference to the rest of the track elements. This track element often deteriorates as a consequence of the vehicle passing or manufacturing imperfections that cause in rail several defects. Among these rail defects, transverse cracks highlights and are considered a severe pathology because they can suddenly trigger the rail failure. This study is focused on UIC-60 rails with transverse cracks. A 3-D FEM model is developed in ANSYS for the flawless rail in which conditions simulating the crack presence are implemented. To account for the inertia loss of the rail as a consequence of the cracking, a reduction of the bending stiffness of the rail is considered. The numerical models have been calibrated using the first four bending vibration modes in terms of frequencies. These vibration frequencies have been obtained using the Experimental Modal Analysis technique, studying the changes in the modal parameters of the rails induced by the crack and comparing the results obtained by the model with experimental results. Finally, the calibrated and validated models for the single rail have been implemented in a complete railway ballasted track FEM model in order to study the static influence of the cracks on the rail deflection caused by a load passing.