• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.351-357
• /
• 2003

원전발생 방사성폐기물 시료 중 TRU를 정량하기위해 모의 사용 후 핵연료 시료 용액 중 Pu, Am 및 Cm 을 이온교환수지 및 HDEHP 추출크로마토그래피로 분리한 다음 알파분광분석법으로 각 핵종의 함량을 정량하였다. Dowex AG1 음이온수지 에서 12M HC1-0.lMHI 용리액으로 Pu를 분리하고 이차분리관인 HDEHP 흡착 분리 관에서 DTPA-Lactic Acid 용리액으로 Am과 Cm을 군분리하였다. 분리된 Pu, Am 및 Cm은 0.1M $NaHSO_4$-0.53M $Na_2SO_4$ 매질에서 전착한 다음 알파분광분석법으로 $^{239}Pu$, $^{241}Am$및 $^{244}Cm$의 알파에너지의 방사능을 측정하여 회수율을 추하였다. 비방사성 금속원소 및 우라늄을 포함하는 합성용액 시료중 $^{239}Pu$, $^{241}Am$및 $^{244}Cm$ 을 측정한 결과 각각 83.8%, 85.2% 및 86.3% 의 회수율을 나타내었다.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.315-322
• /
• 2015

The research carried out on thorium-based fuels indicates that these fuels can be considered as economic alternatives with improved physical properties and proliferation resistance issues. In the current study, neutronic assessment of $UO_2$ in comparison with two $(Th-^{233}U)O_2$, and $(Th-^{235}U)O_2$ thorium-based fuel loads in a heavy water research reactor has been proposed. The obtained computational data showed both thorium-based fuels caused less negative temperature reactivity coefficients for the modeled research reactor in comparison with $UO_2$ fuel loading. By contrast, $^{235}U$-containing thorium-based fuel and $^{235}U$-containing thorium-based fuel loadings in the thermal core did not drastically reduce the effective delayed neutron fractions and delayed neutron fractions compared to $UO_2$ fuel. A provided higher conversion factor and lower transuranic production in the research core fed by the thorium-based fuels make the fuel favorable in achieving higher cycle length and less dangerous and costly nuclear disposals.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.351-359
• /
• 2016

The Korean Prototype Gen-IV sodium-cooled fast reactor (PGSFR) is supposed to be loaded with a relatively-costly low-enriched U fuel, while its envisaged transuranic fuels are not available for transmutation. In this work, the U-enrichment reduction by improving the neutron economy is pursued to save the fuel cost. To improve the neutron economy of the core, a new reflector material, PbO, has been introduced to replace the conventional HT9 reflector in the current PGSFR core. Two types of PbO reflectors are considered: one is the conventional pin-type and the other one is an inverted configuration. The inverted PbO reflector design is intended to maximize the PbO volume fraction in the reflector assembly. In addition, the core radial configuration is also modified to maximize the performance of the PbO reflector. For the baseline PGSFR core with several reflector options, the U enrichment requirement has been analyzed and the fuel depletion analysis is performed to derive the equilibrium cycle parameters. The linear reactivity model is used to determine the equilibrium cycle performances of the core. Impacts of the new PbO reflectors are characterized in terms of the cycle length, neutron leakage, radial power distribution, and operational fuel cost.

• Nuclear Engineering and Technology
• /
• 제40권7호
• /
• pp.581-592
• /
• 2008

In this study, a conceptual pyroprocess flowsheet has been devised by combining several dry-type unit processes; its applicability as an alternative fuel cycle technology was analyzed. A key point in the evaluation of its applicability to the fuel cycle was the recovery yield of fissile materials from spent fuels as well as the proliferation resistance of the process. The recovery yields of uranium and transuranic elements (TRU) were obtained from a material balance for every unit process composing the whole pyroprocess. The material balances for several elemental groups of interest such as uranium, TRU, rare earth, gaseous fission products, and heat generating elements were calculated on the basis of the knowledge base that is available from domestic and foreign experimental results or technical information presented in open literature. The calculated result of the material balance revealed that uranium and TRU could be recovered at 98.0% and 97.0%, respectively, from a typical PWR spent fuel. Furthermore, the anticipated TRU product was found to emit a non-negligible level of $\gamma$-ray and a significantly higher level of neutrons compared to that of a typical plutonium product obtained from the PUREX process. The results indicate that the product from this conceptual pyroprocessing should be handled in a shielded cell and that this will contribute favorably to retaining proliferation resistance.

• Nuclear Engineering and Technology
• /
• 제45권3호
• /
• pp.367-376
• /
• 2013

This study investigated mixing scenarios of the low and high conversion ratios (CRs) of fast reactors (FRs). The fuel cycle was modeled so as to minimize the spent fuel (SF) or transuranics (TRU) inventories. The scenarios were modeled for a single low CR of 0.61 and a high CR of 1.0. The study also investigated the mixing scenario of low-high CR and/or high-low CR. The SF and TRU inventories, associated with different scenarios, were compared to those of the light water reactor (LWR) once-through (OT) case. Also, the important isotope concentration and long-term heat (LTH) load were calculated and compared to those of the OT cycle. As a result, it is known that the deployment of FRs of low CR burns more TRU and results in a reduction of the out-of-pile TRU inventory and LTH with low deployment capacity. This study shows that the mixing strategy of FRs of low and high CR can reduce the SF and TRU inventories with lower deployment capacity as compared with a single deployment of FRs of high CR.

• Nuclear Engineering and Technology
• /
• 제38권6호
• /
• pp.459-482
• /
• 2006

A geochemical approach to the long-term safety of waste disposal is discussed in connection with the significance of actinides, which shall deliver the major radioactivity inventory subsequent to the relatively short-term decay of fission products. Every power reactor generates transuranic (TRU) elements: plutonium and minor actinides (Np, Am, Cm), which consist chiefly of long-lived nuclides emitting alpha radiation. The amount of TRU actinides generated in a fuel life period is found to be relatively small (about 1 wt% or less in spent fuel) but their radioactivity persists many hundred thousands years. Geological confinement of waste containing TRU actinides demands, as a result, fundamental knowledge on the geochemical behavior of actinides in the repository environment for a long period of time. Appraisal of the scientific progress in this subject area is the main objective of the present paper. Following the introductory discussion on natural radioactivities, the nuclear fuel cycle is briefly brought up with reference to actinide generation and waste disposal. As the long-term disposal safety concerns inevitably with actinides, the significance of the aquatic actinide chemistry is summarized in two parts: the fundamental properties relevant to their aquatic behavior and the geochemical reactions in nanoscopic scale. The constrained space of writing allows discussion on some examples only, for which topics of the primary concern are selected, e.g. apparent solubility and colloid generation, colloid-facilitated migration, notable speciation of such processes, etc. Discussion is summed up to end with how to make a geochemical approach available for the long-term disposal safety of nuclear waste or for the performance assessment (PA) as known generally.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1059-1070
• /
• 2016

The Prototype Gen IV sodium cooled fast reactor (PGSFR) has been developed for the last 4 years, fulfilling the technology demonstration of the burning capability of transuranic elements included in light water reactor spent nuclear fuel. The PGSFR design has been focused on the robustness of safety systems by enhancing inherent safety characteristics of metal fuel and strengthening passive safety features using natural circulation and thermal expansion. The preliminary safety information document as a major outcome of the first design phase of PGSFR development was issued at the end of 2015. The project entered the second design phase at the beginning of 2016. This paper summarizes the overall structures, systems, and components of nuclear steam supply system and safety characteristics of the PGSFR. The research and development activities to demonstrate the safety performance are also briefly introduced in the paper.

• 방사성폐기물학회지
• /
• 제6권3호
• /
• pp.233-244
• /
• 2008

본 연구에서는 경수로 사용후핵연료로부터 핵연료 물질(예: 차세대형 원자로의 연료)로 재사용할 수 있는 우라늄과 초우라늄원소군(TRU)을 분리, 회수하기 위한 파이로 처리공정(pyroprocess) 시설의 개념설계연구를 수행하였다. 이 시설의 목적은 공학적 실증시험을 통하여 상용 규모의 확대(scale-up) 자료를 확보하는 것과 운전 경험을 쌓을 수 있도록 하자는 것이고 그 용량은 비교적 작은 공학적 규모인 20 kg HM/batch 로 설정하였다. 처리 대상 핵연료로는 경수로의 전형적인 핵연료 형태인 3.5 % 농축우라늄, 35,000 MWd/tU 그리고 5년 냉각시킨 경수로 사용후핵연료를 선택하였다. 본 개념설계연구에서 고려한 주요 항목은 차폐셀을 포함한 파이로 처리공정 시설의 배치, 공정 운전에 대비한 시설 안전 관리, 방사선 안전, 차폐셀 내 불활성 분위기 관리, 연료 물질의 계량 관리, TRU 제품의 핵임계 관리 등이다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 춘계학술발표회논문집(2)
• /
• pp.833-838
• /
• 1995

This study presents a method to predict plant-specific and operational history dependent scaling factors. Realistic and detailed approaches are taken to find scaling factors at reactor coolant. This approach begins with fission product release mechanisms and fundamental release properties of fuel-source nuclide such as fission product and transuranic nuclide. Scaling factors at various waste streams are derived from the predicted reactor coolant scaling factors with the use of radionuclide retention and build up model. This model makes use of radioactive material balance within the radioactive waste processing systems. According to input parameters of plant operation history, scaling factors predicted at reactor coolant and waste streams are well brought out the effects of plant operation history.

• 방사성폐기물학회지
• /
• 제8권1호
• /
• pp.71-76
• /
• 2010

사용후핵연료로부터 유용한 물질을 회수하는 파이로 공정의 주요 공정 중 하나인 전해정련 기술과 국내의 전해정련 장치 개발에 대해 고찰하였다. 전해정련 반응은 LiCl-KCl 용융염 전해질 내에 우라늄과 초우란금속 및 희토류 등을 함유하는 사용후핵연료 금속전환체를 담은 양극 바스켓과 고체음극으로 구성되고, 양극에서 는 산화(용해)반응이 음극에서는 환원(석출)반응이 진행되며 순수한 우라늄만을 회수한다. 흑연음극이 가진 자발탈리하는 특성과 아래로 모아진 우라늄 석출물을 스크류 이송장치로 자동 회수하는 개념을 도입하여 처리용량이 20 kgU/day 규모의 연속식 고성능 전해정련장치를 개발하였다.