• Proceedings of the KOR-KST Conference
• /
• 1998.09a
• /
• pp.91-99
• /
• 1998

Generally, the tons lifted and ton-kilometers are widely used to analyze the road freight transport. However, these two indicators are simply to show the road freight transport statistics rather than to explain the road freight transportation systems. In this study, the variables such as the number of distribution channel levels, the integral distance, tons in transport and the average transport distance are defined and estimated to investigate the road freight transport system of Korea. In order to compare the road transport system of Korea to other countries, the comparative study was conducted including USA, Japan, Holland and Taiwan. The major findings of this study are as follows; i) The number of distribution channel levels and integral distance of Korea and Taiwan have been increased, but the average transport distance decreased from 1971 to 1996 period. ii) On the contrary to Korea case, the number of distribution channel levels and integral distance of US, Japan and Holland have been decreased, but the average transport distance increased. iii) In the time-series model analysis shows that the number of distribution channel levels are statistically positively closely related to the logistics costs and the costs of transportation as a percentage of GDP.

• Korean Journal of Poultry Science
• /
• v.36 no.1
• /
• pp.9-14
• /
• 2009

This study was conducted to evaluate the effect of three types of transportation distance (short: less than 40 km; intermediate: 70~80 km; long: 140~150 km) on quality of whole chicken and chicken meat cuts. In whole chicken, $1^+$ grade chicken incidence after transportation of short, intermediate, and long distance transportation was 61.3, 56.3, and 43.8%, respectively. Bruise was not shown in breast and thigh, while wings with bruise after short and long distance transportation were 16.7% and 27.3%, respectively. For chicken meat cuts, $1^+$ grade chicken breast incidence after short distance transportation was 14% higher than that after long distance transportation. Bruised chicken breast after short and long distance transportation were 10 and 12%. Pale, soft, and exudative (PSE) chicken breast incidence after long distance transportation was higher (18.3%) than that after short distance transportation (7.0%). Chicken thigh cuts with $1^+$ grade after short and long distance transportation were shown 91.2% and 88.3%, respectively. Also, chicken wing cuts showed similar result to chicken thigh cuts' and $1^+$ grade incidence of chicken wings after short distance transportation was 11% higher than that of after long distance transportation. These results suggest that shorter transportation distance from farm to slaughter house result in high grade whole chicken and chicken meat cuts.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.2
• /
• pp.102-113
• /
• 2004

This paper addresses the transportation planning that is based on genetic algorithm for determining transportation time and transportation amount of minimizing cost of distribution system. The vehicle routing of minimizing the transportation distance of vehicle is determined. A distribution system is consisted of a distribution center and many retailers. The model is assumed that the time horizon is discrete and finite, and the demand of retailers is dynamic and deterministic. Products are transported from distribution center to retailers according to transportation planning. Cost factors are the transportation cost and the inventory cost, which transportation cost is proportional to transportation distance of vehicle when products are transported from distribution center to retailers, and inventory cost is proportional to inventory amounts of retailers. Transportation time to retailers is represented as a genetic string. The encoding of the solutions into binary strings is presented, as well as the genetic operators used by the algorithm. A mathematical model is developed. Genetic algorithm procedure is suggested, and a illustrative example is shown to explain the procedure.

• Journal of the Optical Society of Korea
• /
• v.15 no.1
• /
• pp.30-37
• /
• 2011

Binocular-pair images obtained from two cameras can be used to calculate the three-dimensional (3D) world coordinate of a feature point. However, to apply this method, measurement accuracy of binocular vision depends on some structure factors. This paper presents an experimental study of measurement distance, baseline distance, and baseline direction. Their effects on camera reconstruction accuracy are investigated. The testing set for the binocular model consists of a series of feature points in stereo-pair images and corresponding 3D world coordinates. This paper discusses a method to increase the baseline distance of two cameras for enhancing the accuracy of a binocular vision system. Moreover, there is an inflexion point of the value and distribution of measurement errors when the baseline distance is increased. The accuracy benefit from increasing the baseline distance is not obvious, since the baseline distance exceeds 1000 mm in this experiment. Furthermore, it is observed that the direction errors deduced from the set-up are lower when the main measurement direction is similar to the baseline direction.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.4
• /
• pp.23-32
• /
• 2004

This paper addresses a model for the transportation planning that determines the transportation cycle time and the vehicle size to minimize the cost in a distribution system. The vehicle routing to minimize the transportation distance of the vehicles is also determined. A distribution system is consisted of a distribution center and many retailers. Products are transported from distribution center to retailers according to transportation planning. A model is assumed that the time horizon is continuous and infinite, and the demand of retailers is constant and deterministic. Cost factors are the transportation cost and the inventory cost, which the transportation cost is proportional to the transportation distance of vehicle when products are transported from distribution center to retailers, and the inventory cost is proportional to inventory amounts of retailers. A transportation cycle time and a vehicle size are selected among respective finite alternatives. The problem is analyzed, and a illustrative example is shown.

• Journal of Korean Society of Transportation
• /
• v.10 no.3
• /
• pp.43-58
• /
• 1992

The purpose of this study is to analyse the changes in inter-regional accessibility according to the highway construction. Accessibility of the physical distance(APD), accessibility of the time distance(ATD) and accessibility of the weighted physical distance(AWPD), accessibility of the weighted time distance(AWTD) are used as accessibility index. The result shows that APD, ATD, AWPD and AWTD are improved in the Chechon, Sangju, Chomchon region by the construction of Chongju-Sangju Highway and Taegu-Chunchon Highway. Taechon, Sosan, Kunsan region also improved by the construction of Sohaean Highway and Konju-Sohaean Highway.

• Journal of Korean Society of Transportation
• /
• v.33 no.3
• /
• pp.304-314
• /
• 2015

Detour of metro (subway) in metropolitan area has been regarded as one of inherent elements that make entire metro system less competitive than passenger cars. However, factors affecting detour of metro line is not specified clearly when a new subway system is planned or an existing system is improved. Previous detour-related studies was reviewed for developing 'distance efficeincy evaluation model' for metro as well as its counterpart (i.e. road). Metro line 3 (orange line) of Seoul metropolitan area was applied as a case study. As a results, the most detoured OD segment is Daechi - Apgujeong and its detour factor is 1.93 which means that the distance of the metro is 1.93 times longer distance compared to the distance of the road. The metro line 3 has averagely 20% longer distance compared to road for the identical O/D pairs.

• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.441-451
• /
• 2014

This study proposes a novel performance measure, which is referred to as Hazardous Spacing Index (HSI), to be used for evaluating safety of traffic stream on freeways. The basic principle of the proposed methodology is to investigate whether drivers would have sufficient stopping sight distance (SSD) under limited visibility conditions to eliminate rear-end crash potentials at every time step. Both Road Weather Information Systems (RWIS) and Vehicle Detection Systems (VDS) data were used to derive visibility distance (VD) and SSD, respectively. Moreover, the K-Nearest Neighbors (KNN) method was adopted to predict both VD and SSD in estimating predictive HSIs, which would be used to trigger advanced warning information to encourage safer driving. The outcome of this study is also expected to be used for monitoring freeway traffic stream in terms of safety.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.3
• /
• pp.44-53
• /
• 2007

Forming central warehouses for a number of stores can save costs in the continuous review inventory model due to economy of scale and information sharing. In this paper, transportation costs are included in this inventory model. Hence, the tradeoff between inventory-related costs and transportation costs is required. The main concern of this paper is to determine the number and location of central warehouses. Transportation costs are dependent on the distance from several central warehouses to each store. Hence, we develop an efficient simulated annealing algorithm using distance-based local search heuristic and merging heuristic to determine the location and the number of central warehouses. The objective of this paper is to minimize total costs such as holding, setup, penalty, and transportation costs. The performance of the proposed approach is tested by using some computational experiments.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.12
• /
• pp.1028-1034
• /
• 2003

The objectives of this paper are to study the effect of key parameters on the cycle performance and capacity and to estimate the cost of latent and sensible energy transportation systems. The overall conductance (UA) of each component, the ambient temperature and the absorber inlet temperature are considered the key parameters. It is concluded that COP of the solution transportation using an absorption system (STA) at ambient temperature is 10% higher than that of the conventional sensible system. It is also found that the cost of STA system can be reduced 7.5 times to that of sensible energy transportation for one year of operation with 10 km transportation distance.