• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.410-414
• /
• 2013

Rapid thermal processing (RTP) abruptly decreases the time required to perform solar cell processes. RTP were used to form emitter of crystalline silicon solar cells. The emitter sheet resistance is studied as a function of time and temperature. The objective of this study is reduction of doping process time with same performance. Emitter difRapid thermal dfusion was carried out by using a spin on doping and a RTP. iffusion was performed in the temperature range of $700{\sim}750^{\circ}C$ for 1m 30s~15 m. Thermal budgets yielded a $50{\Omega}/sq$ emitter using a P509 source. To reduce process time and get high efficiency, rapid thermal diffusion by IR lamp was employed in air atmosphere at $700^{\circ}C$ for 15 m.

• Journal of the Korean Society for Railway
• /
• v.14 no.5
• /
• pp.461-469
• /
• 2011

Considering the traffic condition of railroad 'KTX' links to lack of service's punctuality in nation's small/ medium cities, design guidelines with practical railroad transportation policies in terms of convenient railroadbus connection and improving comfortable ride is suggested. Following the guideline and policies, operational requirements of current railroad-bus connection system, the system's design consideration, and transportation policies and laws in relation to the bus operating companies should be analyzed to decide the practicality of the railroad-bus connecting infrastructure. Also, in order to achieve practical railroad-bus connection, connecting buses' design guideline is combined with suggested optimization method of the practicality transportation system. Lastly, the design guideline of buses as 'links,' and railroad transportation policies concerning the operation of connecting bus system for nation's small/medium cities are suggested.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.4
• /
• pp.356-366
• /
• 2022

This paper presents a mode transition method that applies frequency compensation technique of an LLC resonant converter for stable mode transition. LLC resonant converters used in various applications require high efficiency and high power density. However, because of circuit property, a wider voltage gain range equates to a greater circuit loss, so maintaining high efficiency at all voltage gain ranges is difficult. In this case, full bridge-half bridge mode transition method can be used, which maintains high efficiency even in a wide voltage gain range. However, this method causes damage to the circuit through overcurrent by the mode transition. This study analyzes the cause of the problem and proposes a mode transition method that applies frequency compensation technique to solve the problem. The proposed method verifies the stable transition through simulation analysis and experimental results.

• Journal of the Korean Society of Food Culture
• /
• v.29 no.6
• /
• pp.599-604
• /
• 2014

This research was conducted to investigate changes in isoflavone contents and sprouting characteristics of germinated soybeans [Glycine max.] under light condition. The relative wet weight of soybeans increased as germination progressed, and it reached $291.1{\pm}14.3%$ at 60 h after beginning of sprouting. On the other hand, relative dry weight slowly decreased as germination progressed. The length of sprouting rapidly increased as germination progressed. The sprouting rate sharply increased from 12 h to 48 h and reached $96.4{\pm}2.5%$ at 60 h after sprouting. In terms of color, L value did not change until 24 h after the beginning of germination, but it rapidly increased from 24 h to 36 h and did not change thereafter. The a value rapidly increased at 24 h after the beginning of germination and decreased thereafter. The b value rapidly increased at early and last stages and reached $9.0{\pm}0.7$ at 60 h after the beginning of sprouting. Total isoflavone reached a maximum level at 12 h after the beginning of germination and consistently decreased thereafter. Among isoflavone compounds, m-genistin had the highest content followed by daidzin and m-daidzin.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.3-10
• /
• 2022

An estimated investment gap of $176 billion needs to be filled over the next ten years to improve America's inland waterway transportation systems. Many of these infrastructure systems are now beyond their original 50-year design life and are often behind in maintenance due to funding constraints. Therefore, long-term maintenance strategies (i.e., asset management (AM) strategies) are needed to optimize investments across these waterway systems to improve their condition. Two common AM strategies include policy-driven maintenance and performance-driven maintenance. Currently, limited research exists on selecting the optimal AM approach for managing inland waterway transportation assets. Therefore, the goal of this study is to provide a decision model that can be used to select the optimal alternative between the two AM approaches by considering key uncertainties such as asset condition, asset test results, and asset failure. We achieve this goal by addressing the decision problem as a single-criterion problem, which calculates each alternative's expected value and certain equivalence using allocated monetary values to determine the recommended alternative for optimally maintaining navigable waterways. The decision model considers estimated and predicted values based on the current state of the infrastructure. This research concludes that the performance-based approach is the optimal alternative based on the expected value obtained from the analysis. This research sets the stage for further studies on fiscal constraints that will effectively optimize these assets condition.

• Advances in nano research
• /
• v.14 no.4
• /
• pp.303-312
• /
• 2023

In this study, the bifurcation analysis of functionally graded material is done using exponential volume fraction law. Shell theory of Love is used for vibration of shell. The Galerkin's method is applied for the formation of three equations in eigen value form. This eigen form gives the frequencies using the computer software MATLAB. The variations of natural frequencies (Hz) for Type-I and Type-II functionally graded cylindrical shells are plotted for exponential volume fraction law. The behavior of exponent of volume fraction law is seen for three different values. Moreover, the frequency variations of Type-I and -II clamped simply supported FG cylindrical shell with different positions of ring supports against the circumferential wave number are investigated. The procedure adopted here enables to study vibration for any boundary condition but for brevity, numerical results for a cylindrical shell with clamped simply supported edge condition are obtained and their analysis with regard various physical parameters is done.

• Corrosion Science and Technology
• /
• v.7 no.4
• /
• pp.208-211
• /
• 2008

Safety operation of main pipelines is primarily provided by anticorrosive monitoring. Anticorrosive monitoring of oil pipeline transportation objects is based on results of complex corrosion inspections, analysis of basic data including design data, definition of a corrosion residual rate and diagnostic of general equipment's technical condition. All the abovementioned arrangements are regulated by normative documents. For diagnostics of corrosion-technical condition of oil pipeline transportation objects one presently uses different methods such as in-line inspection using devices with ultrasonic, magnetic or another detector, acoustic-emission diagnostics, electrometric survey, general external corrosion diagnostics and cameral processing of obtained data. Results of a complex of diagnostics give a possibility: $\cdot$ to arrange a pipeline's sectors according to a degree of corrosion danger; $\cdot$ to check up true condition of pipeline's metal; $\cdot$ to estimate technical condition and working ability of a system of anticorrosive protection. However such a control of corrosion technical condition of a main pipeline creates the appearance of estimation of a true degree of protection of an object if values of protective potential with resistive component are taken into consideration only. So in addition to corrosive technical diagnostics one must define a true residual corrosion rate taking into account protective action of electrochemical protection and true protection of a pipeline one must at times. Realized anticorrosive monitoring enables to take a reasonable decision about further operation of objects according to objects' residual life, variation of operation parameters, repair and dismantlement of objects.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.3
• /
• pp.264-274
• /
• 2012

Evaluation on the environmental noise is carried out by surveying subjective response of residents with physical measurement of noise during long period in field. Particularly field survey is used to make regulations from the analysis on how many people are annoyed for specific noise level, and laboratory test used to analyze the relationship between physical parameters of noise and subjective responses. In the laboratory controlling the variables is easy but the results could be biased because the condition in room would be different with field. Most of all noise exposure time is considered to be different with real situation, and this study aimed to evaluate the subjective response by exposure time of transportation noise, by applying three kinds of variable how much they give effects on the annoyance as the exposure time is operating condition, windows type and sound level. As a result there was somewhat difference between operating type and annoyance, which is caused by the sound characteristics operated in different condition. However the window type didn't give much effect to the annoyance as much as sound type. This means that the subjective response could give similar result by exposure time even for different window types. Most of all, the main factor affecting subjective response is considered to be the sound level and the exposure time.

• Journal of Korean Society of Transportation
• /
• v.34 no.5
• /
• pp.394-408
• /
• 2016

This study aims to study the impact of weather conditions and locational characteristics of bike stations on the usage of public bike sharing system for efficient deployment and operation of public bike systems. Linear regression analysis is used to estimate the usage of public bikes of Goyang city. The statistical analysis shows that the usage rate increases with average temperature and decreases under high wind (over 7m/s) or high temperature (over $29^{\circ}$) condition. The usage rate of public bike sharing system can be differentiated by locational characteristics of bike station such as residential area, commercial area, park, school, and metro station. The usage rate increases in park and commercial areas from 10 AM to 3 PM, while it increases in school areas from 3 PM to 5 PM. Public bikes are highly used near the metro station from 5 PM to 8 PM. The stations in parks are highly used in late night, and the usage rate in CBD area increases after the midnight.

• Journal of Korean Society of Transportation
• /
• v.33 no.1
• /
• pp.90-99
• /
• 2015

The climate of Korea has clear rainy and dry season due to seasonal wind. In general, The rainy season in Korea is from early summer through to early fall. And precipitation accounted for more than half of the total annual rainfall in this period. This study is aiming to analysis of variation in saturation flow rate at signalized intersection during rainfall. The range of spatial is urban signalized intersections in Seoul and temporal is rainfall or ideal condition in daylight. Traffic data are collected through CCTV of Seoul Metropolitan Police Agency, and on-site video recordings directly. Weather condition data are collected from the Korea Meteorological Administration. In addition, the value of saturation headway and saturation flow rate, in rainfall condition, are derived through video frame analysis. As a results of analysis, decrease of saturation flow rate and increase of saturation headway during rainfall were confirmed by comparison with non-rainfall. The higher rainfall rate is, the more decreased saturation flow rate at the intersections. Rainfall rate is divided three area by the results of statistical test, and saturation flow rate decrease 7%, 17%, 21%, respectively.