• Explosives and Blasting
• /
• v.32 no.2
• /
• pp.1-8
• /
• 2014

In this study, 16 test blastings had been carried out with different spacings, burdens, drilling lengths, and charges per delay for investigating the characteristics of ground vibration propagation, which depends on the delay time. From the tests, it was possible to derive a ground vibration equation. Using the equation, the characteristics of ground vibration could be investigated by analyzing the nomogram and predicting the Peak Particle Velocity (PPV), which are influenced by the delay time and the priming location. The trend of ground vibration change depending on the delay time was analyzed for the standards charges of 0.5, 1.6, 5, and 15 kg, which were suggested in "Blasting design and construction guidelines to road construction" by the Ministry of Land, Infrastructure and Transport. From the study, it would be possible to suggest a favorable vibration control method, which depends on the charge.

• Journal of Navigation and Port Research
• /
• v.27 no.3
• /
• pp.283-288
• /
• 2003

Recently, the growth of applications and services over high-speed Internet increases, ATM networks as wide area back-bone has been a major solution. As the conventional TCP/IP suite is still the standard protocol used to support upper application on current. Internet, the issues regarding whether TCP/IP will operate efficiently on top of an ATM infrastructure and how to control its QoS still remain for studies. TCP uses a window-based protocol for flow control in the transport layer. When TCP uses the UBR service in ATM layer, the control method is only buffer management. If a cell is discarded in ATM layer, one whole packet of TCP will be lost; this fact occur the most TCP performance degradation. Several dropping strategies, such as Tail Drop, EPD, PPD, SPD, FBA, have been proposed to improve the TCP performance over ATM. In this paper, to improve the TCP performance, we propose a packet dropping scheme that is based on comparison with EPD, SPD and FBA. Our proposed scheme is applied to schemes discussed in the previous technology. Our proposed scheme does not need to know each connection's mean packet size. When the buffer exceeds the given threshold, it is based on comparison between the number of dropped packet and the approved packet. Our results are reported and discussed for comparing these discarding schemes under similar conditions. Although the number of virtual channel (VC) is increased, the simulation results showed that the proposed scheme can allocate more fairly each VC than other scheme.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.334-342
• /
• 2012

It is connected with various gauges existing in Euro-Asian continents. Such differences impedes the operation seriously as on the contact of railway tracks of different gauge the cargo must be either transshipped or the running assemblies of rail vehicles must be exchanged. Those operations are costly, time-consuming and require extended infrastructure together with very expensive storage and transshipment facilities at border-crossing point. Moreover, those operations extend transportation time considerably. Therefore, effectiveness of railway transportation systems significantly depends on track gauge change 1435/1520mm, which connects with complicated handling-shifting operations. The paper concerns assessment of effectiveness in strategical rail systems with gauge changing. The paper presents short description of transport system with gauge changing and initial assessment of shifting technologies. Method of system assessment comparison based on Life Cycle Cost model is described here as well.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.237-254
• /
• 2015

Neighborhood Parks are important facilities for urban residents, which provide recreation and vitality to users. But it can degenerate into crime-ridden area in the absence of control system. Recently, Crime Prevention Through Environmental Design is confirmed to be effective for safety enhancement, Ministry of Land, Infrastructure and Transport promulgates enforcement regulation about urban parks and greens. In the enforcement regulation, consideration of CPTED in park design is mandatory. However, there is no systematic guideline for the application and continuous maintenance control. So we develop evaluation indicators of neighborhood park about CPTED, and verify the weighted value of the evaluation indicator through survey targeting related field experts. Then, we evaluate safety of neighborhood parks in Busan using developed evaluation indicators, by three types of CPTED application level. On the physical design elements Busan Citizen Park which applied CPTED method from the design phase received the remarkably hightest score, whereas, on the social elements score was investigated differently in accordance with characteristics of each park.

• Smart Structures and Systems
• /
• v.11 no.5
• /
• pp.555-567
• /
• 2013

An Remote Corrosion Monitoring (RCM) system consists of an anode with low potential, the metallic structures against corrosion, an electrode to provide reference potential, and a data-acquisition system to ensure the potential difference for anticorrosion. In more detail, the data-acquisition (DAQ) system monitors the potential difference between the metallic structures and a reference electrode to identify the correct potential level against the corrosion of the infrastructures. Then, the measured data are transmitted to a central office to remotely keep track of the status of the corrosion monitoring (CM) system. To date, the RCM system is designed to achieve low power consumption, so that it can be simply powered by batteries. However, due to memory effect and the limited number of recharge cycles, it can entail the maintenance fee or sometimes cause failure to protect the metallic structures. To address this issue, the low-overhead energy harvesting circuitry for the RCM systems has designed to replenish energy storage elements (ESEs) along with redeeming the leakage of supercapacitors. Our developed energy harvester can scavenge the ambient energy from the corrosion monitoring environments and store it as useful electrical energy for powering local data-acquisition systems. In particular, this paper considers the energy harvesting from potential difference due to galvanic corrosion between a metallic infrastructure and a permanent copper/copper sulfate reference electrode. In addition, supercapacitors are adopted as an ESE to compensate for or overcome the limitations of batteries. Experimental results show that our proposed harvesting schemes significantly reduce the overhead of the charging circuitry, which enable fully charging up to a 350-F supercapacitor under the low corrosion power of 3 mW (i.e., 1 V/3 mA).

• The Korean Journal of Applied Statistics
• /
• v.26 no.5
• /
• pp.835-845
• /
• 2013

Travel-time is considered the most typical and preferred traffic information for intelligent transportation systems(ITS). This paper proposes a real-time travel-time prediction method for a national highway. In this paper, the K-nearest neighbor(KNN) method is used for travel time prediction. The KNN method (a nonparametric method) is appropriate for a real-time traffic management system because the method needs no additional assumptions or parameter calibration. The performances of various models are compared based on mean absolute percentage error(MAPE) and coefficient of variation(CV). In real application, the analysis of real traffic data collected from Korean national highways indicates that the proposed model outperforms other prediction models such as the historical average model and the Kalman filter model. It is expected to improve travel-time reliability by flexibly using travel-time from the proposed model with travel-time from the interval detectors.

• Journal of Aerospace System Engineering
• /
• v.13 no.6
• /
• pp.70-79
• /
• 2019

The increase of bird strike requires to be amended more safely current airworthiness requirements for bird strike. The USA and Europe are considering the methodology to verify the bird strike requirements based on the finite element analysis (FEA). Meanwhile, the aircraft airworthiness standards in Korea enacted by the Ministry of Land, Infrastructure and Transport were based on those enacted by the Federal Aviation Administration (FAA). This means that the verification methods using the FEA for the bird strike requirements should be reflected in the airworthiness standards in Korea. Our study proposes the methodology for bird strike simulation based on the FEA for the external auxiliary fuel tank assembly on the Surion helicopters and confirmed that the numerical outputs corresponded to the test results. The authors suggest that the methodology and procedure based on the FEA are adopted not only in the bird strike requirements but in various aircraft certifications of civilian rotorcraft.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.57-64
• /
• 2011

The NGN (Next Generation Network) means the kernel infrastructure technology to provide information and communication services which are able to be used at present and future when a ubiquitous computing era has been realized. In other words, NGN can be the frame providing the same information and communication services anytime and anywhere regardless of wire and wireless. The broadband convergence network that has been built in the public institution has established a broadband multimedia communication network supporting voice telephone, task net, internet network, video conference network, voice over IP (VoIP) network and etc. It is possible for a requested bandwidth and services to be served, only if a broadband convergence network provide the interoperability between the various classes which include a transport network layer, network control layer, service control layer and other layers. In this paper, we analyzed the interoperability issues of the present broadband convergence network and propose a guideline for the future one.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.9
• /
• pp.99-105
• /
• 2017

In this paper, we propose to design and implement the database management system for analyzing vehicle accidents through utilizing integration of the public big data. And the paper aims to provide valuable information for recognizing seriousness of the vehicle accidents and various circumstances at the accident time, and to utilize the produced information for the insurance company policies as well as government policies. For analysis of the vehicle accidents the system utilizes the integrated big data of National Indicator System, the Meteorological Office, National Statistical Office, Korea Insurance Development Institute, Road Traffic Authority, Ministry of Land, Infrastructure and Transport as well as the National Police Agency, which differentiates this system from the previous systems. The system consists of data at the accident time including weather conditions, vehicle models, age, sex, insurance amount etc., by which the database system users are able to obtain the integral information about vehicle accidents. The result shows that the vehicle accidents occur more frequently in the clear weather conditions, in the vehicle to vehicle conditions and in crosswalk & crossway. Also, it shows that the accidents in the cloudy weather leads more seriously to injury and death than in the clear weather. As well, the vehicle accident information produced by the system can be utilized to effectively prevent drivers from dangerous accidents.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.51-59
• /
• 2016

OBJECTIVES : The objective of this study is to estimate the appropriate storage required for deicing materials in Gangwon-do for successful snow removal operations during the 2018 Pyeongchang Winter Olympic Games. The final estimates of the deicing chemicals can be used by public agencies to aid decision making. METHODS : First, the database that exists in the road snow-removal management system (RSMS) of the Ministry of Land, Infrastructure, and Transport, South Korea was used to determine historical characteristics of snow removal experiences in Gangwon-do. The database includes historical information, including regional and road weather data and number of snow-removal works. Second, both the maximum and the actual amount of storages used for deicing materials in the past three years were analyzed. Lastly, the final estimates of the deicing materials were evaluated using an additional equation. It considers frequency of salt spray application, total administrative road length estimated by road agencies, and number of days required for snow removal works in Gangwon-do. Consequently, the results show that significant differences were not observed between the final estimates and the maximum amount used during the past three years. RESULTS : The final estimates of the deicing materials are almost similar to the maximum amount used during the past three years in Gangwon-do. CONCLUSIONS : The study shows that the estimates of deicing chemicals can be useful when decision making is required for the snow-removal policy.