• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.530-534
• /
• 2008

The LGP with nanometer structures resulted in enhancement of optical efficiency. Its fundamental mechanism is to recycle the polarized light via one round-trip through QWP(Quarter-wave Plate) but the maximum efficiency to reach with this method is limited up to 2. To get the larger efficiency than this a LGP with 1D PC(one-dimensional photonic crystal) nanometer-patterned on its top and bottom surfaces is suggested. For its optimum design the computer simulation is performed and suggests a grating that the spatial frequency between adjacent patterns is 500nm, its height 250nm, duty cycle 50%, and its cross section is rectangular. The angles of transmitted light are nearly the same as the results expected from the generalized Snell's law. Thus the Mathematica code, developed in this experiment, will be applied to designing the optimized LGP. The LGP with nanometer-patterened 1D PC LGP on its both surfaces shows the enhancement of transmitted intensity distribution up to 5.7 times.

• 한국수산과학회지
• /
• 제51권5호
• /
• pp.556-565
• /
• 2018

The age and growth of butter clams Saxidomus purpuratus were estimated using transmitted light on the shells of 364 samples from January 2017 to December 2017 in Jinhae Bay. Based on monthly variation in the marginal index (MI) of the shell, it is assumed that rings are formed once a year during the period from July to August in this species. The relationship between shell length (SL; mm) and shell height (SH; mm) was expressed by the equation SH=0.8053SL-2.9636 ($R^2=0.94$) and between SL and shell width (SW; mm) by the equation SW=0.5648SL-3.7105 ($R^2=0.90$). The relationship between SL and total weight (TW; g) was expressed by the following equation: $TW=0.00009SL^{3.2141}$ ($R^2=0.96$). von Bertalanffy's growth parameters were estimated using the regression wizard in the SigmaPlot computer program (Systat Software, Inc., v. 10.0). The maximum shell length ($SL_{\infty}$) was 126.16 mm, growth rate was 0.2030/year, theoretical age at shell length 0 ($t_0$) was -0.52 years, and asymptotic total weight ($TW_{\infty}$) was 509.17 g. Growth curves for SL and TW fitted to the von Bertalanffy's equation were expressed as follows: $SL_t=126.16(1-e^{-0.2030(t+0.52)})$, $TW_t=509.17(1-e^{-0.2030(t+0.52)})^{3.2141}$.

• 융합정보논문지
• /
• 제11권2호
• /
• pp.25-30
• /
• 2021

본 논문에서는 가시광 통신시스템에서 플리커 완화 및 BER 성능 향상을 위한 코딩 기법에 관해서 연구하였다. 가시광 통신의 전송 속도를 높이기 위해 다수의 LED를 사용하는 멀티전송 다중 LED 전송시스템이 활발히 연구되고 있다. 그러나 N개의 LED를 사용하는 다중 LED 가시광 통신시스템에서 N개의 LED를 통해 데이터를 전송할 때, 데이터 시퀀스에 따라 동시에 0이 전송되는 연집 Zero 구간이 발생하고, 또한 1의 전송 구간이 서로 다르기 때문에 플리커 현상과 Dimming level의 변화로 인한 조명 성능 저하 현상이 발생하게 된다. 가시광 통신시스템은 통신 및 조명 기능을 동시에 수행하는 통신시스템이다. 따라서 통신의 전송 효율과 조명의 밝기를 동시에 고려되어야 한다. 우리는 이러한 문제를 해결하기 위해 각각의 LED 데이터 시퀀스의 코딩 맵핑을 통해 플리커 현상과 Dimming level 문제를 완화하고 에러 검출 및 BER 성능을 향상시킬 수 있는 플리커 완화 기법을 제안하였다.

• 센서학회지
• /
• 제29권4호
• /
• pp.243-248
• /
• 2020

In this study, we applied transition-frequency modulation to prevent the flickering of light-emitting diodes (LEDs) in visible light communication (VLC). In the VLC transmitter, rectangular waveforms with transition frequencies of four and two in each bit time were used for the high and low bits, respectively, in the non-return-to-zero data. In the VLC receiver, an RC-high-pass filter (HPF) was used to eliminate the interference of the 120 Hz noise light from the adjacent lighting lamps, and an SR-latch circuit was used to recover the transmitted signal using spikes from the output of the RC-HPF. This configuration is useful for constructing VLC systems that are flicker-free and resistant to adjacent noise light interference.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권1호
• /
• pp.35-39
• /
• 1995

After making the light modulator using the BLN-PZT 9.0/65/35 specimen which has the slim-loop hysteresis characteristics and quadratic electro-optic characteristics, switching and spectral response characteristics were investigated. As the results of switching characteristics of the light modulator, it was found that the transmitted light intensity was modulated by both AC and pulse voltage. From the possibility of the selective transmission of the RGB(Red, Green, Blue) spectrum with electric field, the application for the light modulator, light shutter and color filter was expected.

• 대한인간공학회지
• /
• 제26권1호
• /
• pp.29-37
• /
• 2007

This study was performed to evaluate the characteristics of transmitted vibration to hand-arm system under different work posture while operating a light-weighted powered hand grinder. For the experiment, 8 different types of wrist posture (natural, unlar-flexion, radual-flexion, flexion, extension, complex posture, and etc.) and 3 types of feed force (20[N], 50[N], 70[N]) were considered. 10 male subjects were employed to polish metal plate with a hand grinder. All of them were normal and healthy with no history and symptom of the work related musculoskeletal disorders in the dominant hand. Vibration acceleration data were recorded with sampling rate, 2048[Hz]. In addition, unweighted overall R.M.S. acceleration at the tool and wrist, and transmissibility between them were used to evaluate factors from the recorded tri-axial vibration acceleration. The results indicate that transmissibility of natural wrist posture was significantly higher than others. In addition, as the feed force becomes larger, the vibration was transmitted in large quantities to hand-arm system through radius.

• 센서학회지
• /
• 제27권3호
• /
• pp.143-149
• /
• 2018

In this paper, we introduce an edge-spike modulation method for visible light communication (VLC). This method is effective in preventing LED flicker and 120 Hz noise interference in base-band VLC. In the VLC transmitter, edge-spikes are generated by passing the digital data through a simple RC-high pass filter (HPF). The LED modulation of the edge-spikes does not change the average power of the LED light; thus it prevents LED flicker. In the VLC receiver, the 120 Hz noise from other lighting lamps is easily eliminated by RC-HPF, while the edge-spike signal is detected normally. In our experiment, the message of an air-quality sensor was successfully transmitted using edge-spike modulation. This structure is useful in constructing, e.g., wireless gas monitoring sensor systems to warn and prevent harmful gas leakage accidents in buildings using LED light.

• Journal of Photoscience
• /
• 제7권3호
• /
• pp.79-86
• /
• 2000

Phytochromes are red and far-red light absorbing photoreceptors for photomorphogenesis in plants. The red/far wavelength reversible biliproteins are made up of two structural domains. The light-perceiving function of the photoreceptor resides in the N-terminal domain, whereas the signal transducing regulatory function is located within the C-terminal domain. The characteristic role of the phytochromes as phtosensory molecular switches is derived from the phototransformation between two distinct spectral forms, the red light absorbing Pr and the far-red light absorbing Pfr forms. The photoinduced Pr Pfr phototransformation accompanies subtle conformational changes throughout the phytochrome molecule. The conformational signals are subsequently transmitted to the C-terminal domain through various inter-domain crosstalks and induce the interaction of the activated C-terminal domain with phytochrome interacting factors. Thus the inter-domain crosstalks play critical roles in the photoactivation of the phytochromes. Posttranslational modifications, such as the phosphorylation of Ser-598, are also involved in this process through conformational changes and by modulating inter-domain signaling.

• 센서학회지
• /
• 제22권6호
• /
• pp.421-427
• /
• 2013

In this paper, we introduce a new synchronous visible light communication system in which the synchronizing pulse and the data bits are simultaneously transmitted using a 3-level light signal. In the transmitter, the synchronizing pulse and the data bits modulate independently two identical visible LEDs, whose output lights add in free space, make 3-level optical signal. In the receiver, a photodiode detects the light and generates a 3-level output voltage, whose positive and negative part correspond to the synchronizing pulse and the data bits, respectively. The two signals are easily separated and recovered by a simple diode circuit. This configuration provides two independent VLC channels without any multiplexing technique, simplifies the circuit design and construction of synchronous VLC systems.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.133-137
• /
• 2003

When a light is projected upon a material, part of its radiation energy is absorbed and the rest is reflected or transmitted according to the nature of the material. The molecules of the substance absorbing a light obtains the radiation energy to the wavelength of the light to make photochemical degradation by ultraviolet ray or thermal reactions like physical damage by infrared ray. The degree of damage by radiation energy varies to the substances of materials, the spectral power distribution of the light source and the duration of irradiation. Because the damage brings about a devaluation of material and once damaged, it is irretrievable, it is necessary to minimize the damage and conserve the native quality of a material by a protective lighting system. A measuring system was set up to measure the temperature rise of each sample by infrared radiation from light sources. And the temperature rise and temperature distribution by various infrared lamps were measured with varying time.