• 한국군사과학기술학회지
• /
• 제24권5호
• /
• pp.545-557
• /
• 2021

Engine is the main source of vibration that generates unwanted noise and vibration of vehicle chassis. Especially, in submarine applications, radiation of noise signatures can be detected at some distance away from the submarine using a sonar array. Thus quiet operation is crucial for submarine's survivability. This study addresses reduction of the force transmissibility originating from engines and transmitted to hull through engine mounts. An inertial damper, as an actuator of hybrid mount system, is addressed to reduce even further the level of vibration. Narrow band FxLMS algorithms are broadly used to cancel the vibration of engine mount because of its excellent performance of canceling narrow band noise. However, in real active dampers, the maximum displacement of damper mass is kinematically restricted. When the control input signal from the FxLMS algorithm exceeds this limitation, the damper mass will collide with the mechanical stops and results in many problems. Originated from these, a modified narrow band FxLMS algorithm based on the equalizer technique with the maximum allowable displacement of active damper mass is proposed in this study. Some simulation results showed that the propose algorithm is effective to suppress vibration of engine mount while ensuring given displacement constraint.

• International Journal of Computer Science & Network Security
• /
• 제22권2호
• /
• pp.209-213
• /
• 2022

Key exchange protocol (KEP) is an essential setup to secure authenticates transmission among two or more users in cyberspace. Digital files protected and transmitted by the encryption of the files over public channels, a single key communal concerning the channel parties and utilized for both to encrypt the files as well as decrypt the files. If entirely done, this impedes unauthorized third parties from imposing a key optimal on the authorized parties. In this article, we have suggested a new KEP term as isokey interchange protocol based on generalization of modern mathematics term as isomathematics by utilizing isonumbers for corresponding isounits over the Block Upper Triangular Isomatrices (BUTI) which is secure, feasible and extensible. We also were utilizing arithmetic operations like Isoaddition, isosubtraction, isomultiplication and isodivision from isomathematics to build iso-key interchange protocol for network communication. The execution of our protocol is for two isointegers corresponding two elements of the group of isomatrices and cryptographic performance of products eachother. We demonstrate the protection of suggested isokey interchange protocol against Brute force attacks, Menezes et al. algorithm and Climent et al. algorithm.

• 한국기계가공학회지
• /
• 제21권8호
• /
• pp.43-52
• /
• 2022

The vibration characteristics of a hammer press are important parameters for machine design and production control. In this study, a counterblow hammer press was mathematically modelled as a mass-spring-damper system in order to analyze its vibration characteristics. The forging efficiency was theoretically derived as a function of the mass ratio, momentum ratio, and the coefficient of restitution And the effects of the mass ratio, momentum ratio and the restitution coefficient on the forging efficiency were also investigated for two particular cases of the unit mass ratio and unit momentum ratio. Additionally, the vibration responses of the counterblow hammer press due to the ram colliding impact were analyzed, and the force transmitted to the foundation through the mounting unit was determined.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.1047-1053
• /
• 2022

The leaf spring for a truck absorbs shocks or vibrations from the road surface while driving with the elastic force of the material and prevents the shock from being transmitted to the vehicle body. It is subjected to cyclic stress, and fatigue fracture occurs frequently. This study analyzes fractured leaf spring from a 25 ton truck that has been operating for about a year. In the fractured portion, which is the origin of crack, inclusions were observed, and fatigue failure was caused by cyclic stress. In the stress calculation and FE analysis, the stress at the center of the leaf spring was obtained to be 54~65% of the yield strength of the base material and damaged material. It is most important to prevent the mixing of impurities in the steel manufacturing for leaf springs. The large stress portion of the leaf spring needs to introduce compressive residual stress by peening etc.

• International Journal of Computer Science & Network Security
• /
• 제23권10호
• /
• pp.129-134
• /
• 2023

The greatest challenge of this century is the protection of stored and transmitted data over the network. This paper provides a new hybrid algorithm designed based on combination algorithms, in the proposed algorithm combined with Hill and the Advanced Encryption Standard Algorithms, to increase the efficiency of color image encryption and increase the sensitivity of the key to protect the RGB image from Keyes attackers. The proposed algorithm has proven its efficiency in encryption of color images with high security and countering attacks. The strength and efficiency of combination the Hill Chipper and Advanced Encryption Standard Algorithms tested by statical analysis for RGB images histogram and correlation of RGB images before and after encryption using hill cipher and proposed algorithm and also analysis of the secret key and key space to protect the RGB image from Brute force attack. The result of combining Hill and Advanced Encryption Standard Algorithm achieved the ability to cope statistically

• 한국음향학회지
• /
• 제25권5호
• /
• pp.197-206
• /
• 2006

비올족 현악기에서 현의 진동은 브릿지에 의해 전판에 전달되어서 악기 몸통을 공명시킨다. 따라서 브릿지의 재질, 기하학적 형상, 설치 위치 등이 음색에 영향을 미치게 된다. 본 연구에서는 첼로에서 현에 의해 변위가 가해질 때 브릿지 내부의 변형, 응력, 그리고 브릿지 다리에 의해 전판에 미치는 힘을 탄성학적으로 해석하고, 브릿지의 고유진동모드와 고유진동주파수 등을 구하였다. 또, 브릿지의 형상이 음색에 미치는 영향을 주파수 응답의 관점에서 측정하였다. 본 연구의 결과는 첼로에서 브릿지의 진동특성은 대단히 복잡하고, 그 재질, 형상 등이 음색에 큰 영향을 미치며, 따라서 브릿지의 형상을 변화시킴으로써 첼로의 음색을 조정하는 것이 가능함을 실험적으로 보였다.

• 구강회복응용과학지
• /
• 제21권1호
• /
• pp.1-14
• /
• 2005

The purpose of this study was to assess the loading distributing characteristics of implant prosthesis of internal connection system(ITI system) according to position and direction of load, under vertical and inclined loading using finite element analysis (FEA). The finite element model of a synOcta implant and a solid abutment with $8^{\circ}$ internal conical joint used by the ITI implant was constructed. The gold crown for mandibular first molar was made on solid abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone. This study simulated loads of 200N at the central fossa in a vertical direction (loading condition A), 200N at the outside point of the central fossa with resin filling into screw hole in a vertical direction (loading condition B), 200N at the centric cusp in a $15^{\circ}$ inward oblique direction (loading condition C), 200N at the in a $30^{\circ}$ inward oblique direction (loading condition D) or 200N at the centric cusp in a $30^{\circ}$ outward oblique direction (loading condition E) individually. Von Mises stresses were recorded and compared in the supporting bone, fixture, and abutment. The following results have been made based on this study: 1. Stresses were concentrated mainly at the ridge crest around implant under both vertical and oblique loading but stresses in the cancellous bone were low under both vertical and oblique loading. 2. Bending moments resulting from non-axial loading of dental implants caused stress concentrations on cortical bone. The magnitude of the stress was greater with the oblique loading than with the vertical loading. 3. An offset of the vertical occlusal force in the buccolingual direction relative to the implant axis gave rise to increased bending of the implant. So, the relative positions of the resultant line of force from occlusal contact and the center of rotation seems to be more important. 4. In this internal conical joint, vertical and oblique loads were resisted mainly by the implant-abutment joint at the screw level and by the implant collar. Conclusively, It seems to be more important that how long the distance is from center of rotation of the implant itself to the resultant line of force from occlusal contact (leverage). In a morse taper implant, vertical and oblique loads are resisted mainly by the implant-abutment joint at the screw level and by the implant collar. This type of implant-abutment connection can also distribute forces deeper within the implant and shield the retention screw from excessive loading. Lateral forces are transmitted directly to the walls of the implant and the implant abutment mating bevels, providing greater resistance to interface opening.

• 동남아시아연구
• /
• 제21권2호
• /
• pp.43-75
• /
• 2011

The article focuses on the impact and Acceptance of Hindu culture in Modern Southeast Asian Buddhism. The purpose of this study is to examine critically the influential epic Ramayana on Siam culture, Thai Ramayana version 'Ramakien', reveal instances of Buddhist Modification. The Ramayana by the great sage Valmiki is considered by Indians to be the first great literary work to be produced in India. The influence of this work is to be seen not only through centuries but even in other countries, such as Thailand where there are modified modern versions. In this paper, I have three objectives : (1) I may discuss the epic Ramayana of India gave birth to the Ramakien of Thailand. In modern times Valmiki's epic was made to fit the spiritual trends current in the new Chakri dynasty, which were themselves based on Brahmanic tradition and Theravada buddhism. With regarding to the structure of the Traibhumi cosmography, and the relationship between merit and power implied by this cosmography ranks all beings from demons to deities in a hierarchy of merit which accrues according to karma the actions of past lives. (2) I analyze how to have attempted to dissect the Hindi and Thai version of the Ramayana. The Hindu concept of kingship is also depicted in the life of Rama. The Hindus see in Rama the norm of a true Hindu life characterized by the Caste and Dharma. In Thai transformed version, it does not preach Hindu values of personal or social life. The Ramakien emphasized that the Buddhism were higher than all other laws, and that the King is regarded as the incarnation of Phra Ram, and thus is also the narration of the righteous buddhist ruler. (3) I discuss how cultural or social contexts can influence the structure of the royal Wat. The whole epic was painted by the order of Rama I in the galleries of the Wat Phra Keo. In other words, it is the very centre of the dynastic cult enshrining the Emerald Buddha, the most iconic expression of the Ramakien tradition were officially amalgamated. Rama I was continued the process of elaborating and stabilizing the complex religious pattern, with Buddhism at the pinnacle. My finding will support the idea that the Ramakien is particularly appealing to the Thai people because it presents the image of an ideal king, Rama, who symbolizes the force of virtue or dharma while Thotsakan represents the force of evil. Eventually the force of good prevails. Being Buddhists, the Thai poets bring into the story the Buddhist philosophy(especially, the law of cause and effect, karma). This paper examines the role of the Hindu epic Ramayana in the historical and cultural contact between Hindu India and Buddhist Southeast Asia. It should now be possible to evaluate what elements of Hindu culture were transmitted into Thai through the Rama story.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.47-53
• /
• 2022

콘크리트구조물의 한계상태설계법이 적용되면서 구조물의 극한상태까지 고려하는 설계가 이루어지고 있다. 실제 철근콘크리트 부재가 인장력을 부담할 때 부재가 항복한 후에도 극한상태까지 콘크리트가 인장력을 부담한다. 따라서 한계상태 거동에 대한 정확한 평가를 위해서는 휨 부재의 항복 후 인장강화효과에 대한 연구가 필요하다. 본 연구에서는 복철근 직사각형 단면을 가지는 RC 단순보에 대하여 4점 휨 실험을 수행하였고, 영상분석기법을 이용하여 부재의 거동을 상세하게 분석하였다. 분석 결과를 이용하여 휨 인장강화효과 계수를 도입한 항복 후 인장강화효과 추정식을 제안하였고, 이를 기존 연구들의 실험 결과를 통해 적용성을 검증하였다. 부재의 연성거동을 대표하는 극한 변형률과 항복 변형률 차이가 실험 결과와 유사하게 나타나 제안식의 예측이 비교적 정확한 것으로 판단된다.

• 한국해안해양공학회지
• /
• 제14권3호
• /
• pp.183-191
• /
• 2002

해수교환이 우수하고, 조차에 따라 상·하로 자유롭게 운동하며, 연약지반과 대수심역에도 설치될 수 있다는 것을 일반적인 부방파제의 주요한 특징으로 들 수 있다. 본 연구는 말뚝계류된 부방파제에 의한 3차원파랑제어와 동적인 거동을 경계적분법과 고유함수전개법을 병용하는 수치해석법으로부터 논의한다. 여기서, 말뚝계류시스템은 연직운동만이 허용되고 다른 운동성분들은 모두 구속되며, 체인계류시스템보다도 파랑에너지의 흡수가 많은 것으로 알려져 있다. 본 연구에서는 말뚝계류에 있어서 말뚝과 본체인 폰툰과의 사이에 작용하는 마찰력과 같은 저항력은 고려되지 않는다. 수치해석결과에 따르면 부방파제의 홀수와 폭의 변화는 파랑제어에 큰 영향을 미치고, 입사파의 주기가 길면 부방파제를 통한 전달파가 크다는 것을 알 수 있다. 그리고, 부방파제의 연직운동은 단주기파에서 크게 나타난다.