• 분석과학
• /
• 제13권2호
• /
• pp.250-257
• /
• 2000

페인트, 섬유, 잉크 등은 범죄현장에 유류되는 많은 증거물 중 가장 빈번하게 접하게 되는 법과학 증거물로서 이들에 대한 분석 결과는 범죄현장과 피해자 또는 피의자, 피해자와 피의자간의 상황 재구성 및 인과관계, 도주 용의 차랑 등의 추적에 결정적인 역할을 하고 있다. 그러나 이들 시료는 육안으로 거의 확인이 되지 않을 만큼 극미량의 미세한 시료가 대부분이므로 법과학분야에서 미세시료에 대한 체계적인 분광학적 분석법이 대두되고 있다. 본 연구에서는 현미 자외/가시광선 현미분광광도계를 이용하여 섬유 14종, 국내 자동차 차체 페인트 2개 색상 44종 및 3개 회사의 컬러 프린트용 잉크로 인쇄한 4개 색상 12종에 대해 자외선/가시광선 영역(240-780nm)에서 투과 및 반사 측정법으로 측정하였으며, 각각 특징적인 흡수대로 섬유, 페인트 및 잉크의 이동식별이 가능하였다.

• 한국산학기술학회논문지
• /
• 제8권4호
• /
• pp.726-732
• /
• 2007

ALD (atomic layer deposition)법을 이용하여 두께를 달리한 $10{\sim}50nm-TiO_{2-x}/quartz$ 구조의 UV 기능성 박막을 형성시켰다. 박막의 두께는 우선 $10nm-TiO_{2-x}$를 성막한 후 엘립소미터로 두께를 확인하였고 나머지 두께는 증착시간을 선형적으로 조절하여 완성하였다. $TiO_2$ 박막 두께에 따른 생성상과 파장대별 흡수도, 가시광선의 투과율을 각각 X선 회절기, UV-VIS-IR 분석기, 접사용 디지털 카메라를 써서 확인하였다. ALD 법으로 제조된 $TiO_{2-x}$는 벌크 $TiO_2$에 비해 비정질 (amorphous)이면서 비정량적인 $TiO_{2-x}$ 형태임을 확인하였다. 380 nm와 415 nm의 흡수단을 보여 $3.0{\sim}3.2eV$의 밴드갭을 가지는 기존의 벌크 $TiO_2$와는 달리, 제작된 $TiO_{2-x}$ 박막은 197 nm와 250 nm의 부근에서 흡수단을 보이는 특징이 있었다. 따라서 장파장대의 자외선을 차단하는 기능을 가진 기존의 벌크 $TiO_2$와는 달리 ALD로 제작된 나노급 $TiO_2$는 단파장대의 자외선을 흡수할 수 있는 기능성이 있었고, 아울러 가시광선대에서 우수한 투과도를 보였다. 새로이 제안된 ALD를 이용한 나노급 $TiO_{2-x}$ 박막은 가시광선의 투과도는 향상시키면서 단파장대의 자외선을 효과적으로 흡수하는 기능성을 가졌음을 확인하였다.

• 한국세라믹학회지
• /
• 제34권2호
• /
• pp.209-215
• /
• 1997

Reactive Single Ion Beam Sputtering 방법을 이용하여 AIN박막을 증착하고 물성을 분석하였다. 반응성 가스로 질소 가스 또는 암모니아 가스를 이용하였다. 증착된 AIN박막의 구조적, 화학적, 광학적 물성을 분석하기 위해 XRD, GAXRD, TEM, SEM, XPS, UV/VIS spectrophotometer, FT-IR등을 이용하였다. XRD, GAXRD분석결과에 의하면 증착된 모든 AIN박막은 비정질이었으나 TEM분석결과에서는 비정질 속에 육방정의 AIN미세결정들이 분포해 있었다. 그리고 FT-IR과 XPS분석을 통하여 Al-N결합을 확인하였으며, 화학양론적인 조성이 됨에 따라 UV-VIS spectrophotometery 분석에서 투광성이 증가하며 광학적 밴드갭은 6.2eV까지 증가함을 확인하였다. 또한 단면과 표면 형상관찰에서는, 반응성 가스로 질소 가스나 암모니아 가스에 관계없이, 결정입계가 전혀 관찰되지 않는 아주 평활한 현상이었으며 굴절율은 1.6~1.7의 값을 갖는다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1985년도 추계학술대회 논문집
• /
• pp.21-23
• /
• 1985

By adding La$_2$O$_3$ to optical multicomponent glass composition, after making mother glass and core fiber that enable to enlarge the infrared transmittance region, then surveyed the optical properties. Through thermal analysis of the glass abstained by melt-quenching after selecting stable basic composition on devitrification and replace SiO$_2$ by 4-12wt% La$_2$O$_3$. As La$_2$O$_3$ increases up to l2wt% transition temperature, refractive index, density, deformation temperature increased, whereas thermal expansion coefficient decreased. As a result of inspectig transmittance in UV/VIS/IR region, visable region indicated the decrease of transmittance by increasing the La$_2$O$_3$ and transmittance region was enlarged by increasing the La$_2$O$_3$ in IR region. Also, fabricate core fiber at 820$^{\circ}C$ and severy the optical loss we could fact that La$_2$O$_3$ composition added 12wt% showed the minimum optical loss.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.467-472
• /
• 2009

Ultraviolet curable coating solution was prepared with poly(ethylene glycol) acrylate oligomer and various mono and multi-functional acrylate monomers. The optical properties of UV cured coating layer on PET film with acrylate coating solution containing metal oxides, such as fumed silica and alumina, were also investigated to reduce light reflection on films. Poly(ethylene glycol) diacrylate which has 575 of average molecular weight was used as oligomer acrylate, and pentaerythritol triacrylate and dipentaerythritolpenta-/hexa acrylate were used as multi-functional acrylate monomers. Also, butyl acrylate was used to improve the adhesion as well as to reduce glass transition temperature to give a better flexability. 1-hydroxy cyclohexyl phenyl ketone was used as photoinitiator. We found out the metal oxides in acrylate coating solution showed a homogeneous dispersion from energy dispersive spectroscopy data. Transmittance and light reflection of coated PET film was measured with UV/vis spectrometer and gloss meter, respectively. When 1.00 g of both metal oxides was added into coating solution, the transmittance and the glossiness were reduced from 90% to 30% and from 190 GU to 35 GU, respectively. However, adding up to 1.00 g of the metal oxide into coating solution did not affect on the hardness of coating layer and adhesion between coated layer and PET film. Conclusively, we can control transmittance and light reflection of coated film by adjusting the amounts of metal oxide in coating solution.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.419-420
• /
• 2008

In this work, we report several experimental data capable of evaluating the phase transition characteristics of (InTe)x(GeTe)y (x = 0.1, 0.3, y =1) pseudo-binary thin films. (InTe)x(GeTe)y phase change thin films have been prepared by thermal evaporator. The crystallization characteristics of amorphous (InTe)x(GeTe)y thin films were investigated by using nano-pulse scanner with 658 nm laser diode (power : 1~17 mW, pulse duration : 10~460 ns) and XRD measurement. It was found that the crystalline speed of In-Ge-Te thin films are faster than $Ge_2Sb_2Te_5$[1] and also the crystalline temperature is higher. Changes in the optical transmittance of as-deposited and annealed films were measured using a UV-VIS-IR spectrophotometer and four-point probe was used to measure the sheeresistance of InGeTe films annealed at different temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.353-353
• /
• 2008

Carbon nanotubes (CNTs) are attractive for field emitter because of their outstanding electrical, mechanical, and chemical properties. Several applications using CNTs as field emitters have been demonstrated such as field emission display (FED), backlight unit (BLU), and X-ray source. In this study, we fabricated a CNT cathode using transparent ultra-thin CNT film. First, CNT aqueous solution was prepared by ultrasonically dispersing purified single-walled carbon nanotubes (SWCNTs) in deionized water with sodium dodecyl sulfate (SDS). To obtain the CNT film, the CNT solution in a milliliter or even several tens of micro-litters was deposited onto a porous alumina membrane through vacuum filtration process. Thereafter, the alumina membrane was solvated by the 3 M NaOH solution and the floating CNT film was easily transferred to an indium-tin-oxide (ITO) glass substrate of $0.5\times0.5cm^2$ with a film mask. The transmittance of as-prepared ultra-thin CNT films measured by UV-Vis spectrophotometer was 68~97%, depending on the amount of CNTs dispersed in an aqueous solution. Roller activation, which is a essential process to improve the field emission characteristics of CNT films, increased the UV-Vis transmittance up to 93~98%. This study presents SEM morphology of CNT emitters and their field emission properties according to the concentration of CNTs in an aqueous solutions. Since the ultra-thin CNT emitters prepared from the solutions show a high peak current density of field emission comparable to that of the paste-base CNT emitters and do not contain outgassing sources such as organic binders, they are considered to be very promising for small-size-but-high-end applications including X-ray sources and microwave power amplifiers.

• 한국재료학회지
• /
• 제19권12호
• /
• pp.657-660
• /
• 2009

Optical characteristics and structural changes depending on CuO content in phosphate glasses that are used in near-infrared (near-IR) filters were investigated. With phosphate glasses that contain 1-9 mol% CuO, changes in optical transmittance, optical absorption, and color coordinate were measured with a UV-VIS spectrophotometer. An XPS (X-ray photoelectron spectroscopy) analysis was performed to determine valence of copper ion that influences optical characteristics in near-IR filter glasses. Structural changes in glasses depending on CuO content were also analyzed by FT-IR (Fourier transform infrared) and Raman spectrophotometers. From the UV-VIS spectrophotometer results, strong absorption peaks at 220 & 900 nm were found and transmittance was decreased. The color coordinates of the glasses were shifted to the green color direction with CuO addition for increasing absorption of long wavelength range spectra, in spite of the amount of $Cu^{2+}$, which gives a blue color to glasses, and which was increased in XPS results. Also, structural de-polymerization of glasses with CuO addition were found by FT-IR and Raman results.

• 한국전기전자재료학회논문지
• /
• 제27권8호
• /
• pp.483-485
• /
• 2014

Transparent amorphous In-Si-O (ISO)/Ag/In-Si-O (ISO) has been reported for low emissivity (low-e) applications. Effective Si doping into the $In_2O_3$ matrix led to a completely amorphous ISO film as well as a low resistivity and a high optical transmittance. The optical and electrical performances were examined by measuring transmittance with a UV-VIS spectrophotometer and resistivity with a Hall effect measurement. Consequently, low-e glass with ISO/Ag/ISO showed a high transparency in the visible region and low emissivity in the infrared region, indicating that ISO is a promising amorphous transparent electrode for low-e glass.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.547-550
• /
• 2004

Indium tin oxide(ITO) films were prepared as a function of varying the proportion of oxygen$[0{\sim}1.0sccm]$ at fixed he gas[20sccm] by facing targets sputtering(FTS) system. Then electrical and optical properties of ITO thin films were estimated by Hall effect measurement system and UV/VIS-spectrometer. In the result, at very little oxygen rate, we can prepare a low resistivity ITO thin film of $3.40{\times}10^{-4}[\Omega{\cdot}cm]$ and transmittance of over 80%. So we noticed that the ITO thin film with low resistivity and high transmittance was prepared by FTS at room temperature.