• 공업화학
• /
• 제10권4호
• /
• pp.603-607
• /
• 1999

Potassium iodide(KI)를 함유하는 poly(vinyl alcohol)(PVA) 필름의 산화공정에 의해 제조된 PVA-iodine 착제물(PVA_KI계)의 편광특성을 조사하였다. PVA-KI계 편광필름의 UV-visible 스펙트럼은 220 nm, 290~360 nm와 650 nm에서 $I^{-}$, $I{_3}{^-}$와 $I{_5}{^-}$ 발색단에 해당하는 흡수밴드를 각각 나타냈다. PVA-KI계 필름의 편광효율과 투과도는 산화시간, 연신비율, KI 농도 등에 크게 의존하였다. 제조된 편광필름은 99.5%와 45%의 높은 편광효율 및 투과도를 나타냈다. 특히 산화공정에 의해 제조된 편광필름의 열저항은 기존의 PVA-$I_2$계 편광필름에 비하여 뛰어났다. 이러한 결과는 PVA 편광필름의 산화공정의 차이에 기인된다고 생각된다.

• 한국전기전자재료학회논문지
• /
• 제24권4호
• /
• pp.303-308
• /
• 2011

The Gallium-doped ZnO(GZO) film deposited at a temperature of $200^{\circ}C$ and a pressure of 10 mtorr has an optical transmittance of 89.0% and a resistivity of $2.0\;m{\Omega}{\cdot}cm$ because of its high crystallinity. Effect of $Al_2O_3$ oxide buffer layers on the optical and electrical properties of sputtered ZnO films were intensively investigated for developing the electrodes of opto-electronic devices which demanded high optical transmittance and low resistivity. The use of $Al_2O_3$ buffer layer could increase optical transmittance of GZO film to 90.7% at a wavelength of 550 nm by controlling optical spectrum. Resistivity of deposited GZO films were much dependent on the deposition condition of $O_2/(Ar+O_2)$ flow rate ratio during the buffer layer deposition. It is considered that the $Al_2O_3$ buffer layer could increase the carrier concentration of the GZO films by doping effect of diffused Al atoms through the rough interface.

• 한국재료학회지
• /
• 제17권10호
• /
• pp.516-520
• /
• 2007

Indium tin oxide, which is used as transparent conducting layer in flexible device, is deposited on PET film by a magnetron sputtering in 300 mm wide roll-to-roll process (vacuum web coating). Sheet resistance, specific resistance and transmittance is differed by sputtering parameters such as working pressures, oxygen partial pressure, and thickness of ITO layer. ITO layer is deposited about 90 nm at roll speed of 0.24 m/min and its sputtering power is 3 kW. From the XRD spectrum deposited ITO layer is verified as amorphous. Under working pressure varied from $3{\times}10^{-4}\;Torr$ to $2{\times}10^{-3}\;Torr$, sheet resistance is lowest at the working pressure of $1{\times}10^{-3}\;Torr$ and its value is from $110\;{\Omega}/{\square}$ to $260\;{\Omega}/{\square}$ at the thickness of 90 nm. Oxygen partial pressure also varies sheet resistance and is optimized at the regime from 0.2% ($1.8{\times}10^{-6}\;Torr$) to 0.6% ($6{\times}10^{-6}\;Torr$). In this oxygen partial pressure sheet resistance is lower than $150\;{\Omega}/{\square}$. As ITO layer thickness increases, sheet resistance decreases down to $21\;{\Omega}/{\square}$ and specific resistance is about $7.5{\times}10.4{\Omega}cm$ in 340 nm thickness ITO layer. Transmittance is measured at the wavelength of 550 nm and is about 90% for 180 nm thickness ITO/PET.

• 한국태양에너지학회 논문집
• /
• 제22권4호
• /
• pp.44-50
• /
• 2002

Photosynthesis of plants is effective in the range of 550 to 700 nm of the wavelength of solar irradiation. If the conversion of ultraviolet to the above mentioned region is possible, the photosynthesizing ability is expected to be enhanced. $Eu^{3+}$ doped soda-lime bulk and $TiO_2-SiO_2$ sol-gel coated glasses were prepared and their spectroscopic properties were studied. The absorption and emission spectra for the specimens were measured with the changes of wavelength and Eu ion concentration in the range of the wavelength of 300 to 700nm. The transmittance intensity of visible light through the bulk glass and the coated one was unchanged with the addition of Eu element. The emission spectrum intensity of $Eu^{3+}$ was found to be the maximum at 618 nm which is a transition of $^5DO{\rightarrow}^7F_2$. Additionally, it was shown that the intensity was linearly increased up to 10% of the Eu concentration.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.438-440
• /
• 2005

At present, characteristic of high color reproduction for LCD TV is needed in Display market according to start mass production of LCD TV. Therefore development target for LCD is focused on improvement of color reproduction. The improving methods of high color reproduction are alteration of color Filter or Red, Green, Blue phosphor alteration of CCFL. But decrease of luminance and panel transmittance is caused by alteration of Color Filter. Accordingly, we completed LCD with high color reproduction by the most suitable emission spectrum of CCFL phosphor at panel with conventional color filter. In this experiment, we knew that LCD applied to CCFL with high color rendering characteristic had color reproduction range of 81% compared with NTSC in CIE color coordinate. According to increase of intensity peak and alteration of Red, Green, Blue phosphor spectrum, we made LCD with high color reproduction characteristic. In conclusion we achieved improvement of color reproduction ratio by alteration of CCFL phosphor without changing color filter.

• Composites Research
• /
• 제24권1호
• /
• pp.45-50
• /
• 2011

자체-감지능 있는 다기능성 나노복합소재를 위해, 투명하고 전도성 있는 카본나노튜브 (CNT)로 코팅된 폴리에틸렌 테레프탈레이트(PET)를 함침 방법으로 제조하였다. CNT 코팅의 전기적 광학적 특정의 변화는 함침 횟수와 CNT용액의 농도에 주로 의존하였다. 결과적으로, CNT 코팅의 표면저항과 투과도는 제조공정의 변수들에 따라 예민하게 조절되었다. CNT 코팅의 표면저항은 4점법과 이중 배열법에 의해 측정되었으며, 광학적 투과도는 UV 스펙트럼을 사용하여 평가하였다. CNT 코팅의 표면특성을 측정한 정적 및 동적 접촉각은 상호 일치함을 보여주었다. 함침 코팅수가 증가함에 따라, CNT코팅한 PET의 표면저항은 현저하게 저하했으나, 투명도는 CNT 네트워크의 특성으로 거의 감소하지 않았다. CNT와 인듐틴옥사이드 (ITO)의 계면 및 전기적 특성들은 피로 시험을 통하여 비교하였다. CNT는 2000회 반복 후에도 표면저항의 변화가 없는 반면에, ITO는 1000회 반복까지 표면저항의 급격한 증가를 보여주었다가 안정화하였다. 이는 형상비가 큰 CNT는 전기 접촉점을 계속 유지하는 반면에, 취성이 있는 ITO는 미세 균열이 발생하여 전지 접촉점을 많이 상실하기 때문이다.

• 한국광학회지
• /
• 제32권5호
• /
• pp.220-229
• /
• 2021

눈부심 방지를 위한 확산판의 투과율과 연색지수 향상을 위한 양자점 필름의 농도가 고출력 직하형 백색 LED 조명의 광특성에 미치는 영향을 조사했다. 확산판의 투과율이 감소할 경우 조명의 휘도는 줄어들었고 색좌표, 상관색온도는 별다른 변화를 보이지 않았으며 연색지수는 약간 상승했다. 시야각에 따른 광특성의 편차는 거의 없었고 휘도 분포는 람버시안 분포에 가까웠다. 양자점 필름의 농도가 증가할 경우 스펙트럼 상 적색 성분이 늘어나면서 이 성분의 비중을 표현하는 색좌표 x가 증가했고 상관색온도는 약 6000 K에서 4000 K 부근으로 현저히 감소했다. 아울러 조명의 구조를 최적화하면 연색지수가 95까지 증가함을 확인했다. 이런 결과는 적절한 투과율의 확산판과 양자점 필름의 조합을 통해 눈부심이 없고 시야각에 따른 색편차가 거의 없으며 특히 색좌표의 가변이 가능한 고연색성의 조명 구현이 가능함을 보여준다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.63-66
• /
• 2004

Transparent MgO thin films were deposited on glass substrates by electron beam evaporation of MgO (99.99%) under $O_2$ atmosphere at 150-250 $^{\circ}C$. These films were characterized for their useful properties such as thickness, transmission, and refractive index using ultraviolet / visible (UV/VIS) spectrophotometer, scanning electron microscopy (SEM), and Spectroscopic Ellipsometry. The thickness of MgO films were measured by alpha step instrument and found to be 600 nm to 1000 nm and are meeting the stoichiometry. The transmission spectrum of these films shows transmittance values ${\sim}$92%..

• Current Photovoltaic Research
• /
• 제8권1호
• /
• pp.1-5
• /
• 2020

The most important factor in enhancing the performance of an optical device is to minimize reflection and increasing transmittance of light for a broad wavelength range. The choice of appropriate coating material is crucial in decreasing reflection losses at the substrate. The purpose of this review is to highlight anti-reflection coating (ARC) materials that can be applied to silicon solar cell and glass substrate for minimizing reflection losses. The optical and electrical behavior of ARC on a substrate is highly dependent on thickness and refractive index (RI) of ARC films that are being deposited on it. The coating techniques and performance of single and multi-layered ARC films after coated on a substrate in a wide range of wavelength spectrum will be studied in the paper.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 동계학술발표회 논문집
• /
• pp.221-222
• /
• 2007

The UV laser trimming can be useful to have an accurate performance specification of the passive waveguide devices. In order to measure the change of the refractive index of polymer overclad layer under the irradiation of uv light in a high precision Bragg grating is fabricated on the silica core of planar waveguide and the corresponding transmittance spectrum was analyzed. An effective refractive index change of $4.7x10^{-5}$ was obtained for a straight waveguide when its $60{\mu}m$-thick overclad was irradiated by UV laser pulses of its total fluence 24 $J/cm^2$.