• 통합자연과학논문집
• /
• 제8권1호
• /
• pp.60-66
• /
• 2015

The physical and optical properties of polymers with 2-fluoroaniline and 4-fluoroaniline added, which can be used for hydrophilic ophthalmic lenses, were investigated in this study. The UV-blocking properties of 2- and 4-fluoroaniline were also investigated by measuring their UV transmissibility. 2- and 4-Fluoroaniline were used as additives for the basic combination of HEMA, 5% AA, and 1% MMA, and the materials were copolymerized with EGDMA as the cross-linking agent and AIBN as the initiator. The refractive index, water content, optical transmittance, tensile strength, and contact angle were measured to evaluate the physical properties of the produced hydrogel lens. The measured physical properties of the hydrogel contact lens produced with the copolymerized polymer showed a refractive index of 1.425-1.436; a water content of 36.95-44.65%; a visual light transmittance of 66.0-81.0%; a tensile strength of 0.138-0.281 kgf; and a contact angle of $55.02-57.87^{\circ}$. The UV transmissibility was significantly reduced, which indicates that 2-fluoroaniline and 4-fluoroaniline have UV-blocking properties. This study showed that 2- and 4-fluoroaniline are expected to be used as UV-blocking materials in hydrogel ophthalmic lenses whose physical properties, such as their refractive index and water content, do not change.

• 한국세라믹학회지
• /
• 제24권4호
• /
• pp.321-328
• /
• 1987

The chemical durability of six alumino fluorophosphate glass samples studied. The composition of glass varied with MgF2 content from 0 to 12.5wt% in 30AlF3-2MgF2-(50-x)MF2-10P2O5(M; Sr, Ba). Samples were maintained in distilled water at 95$^{\circ}C$ from 1 to 100hrs. Weight loss, pH change and leached elements of the solution, and IR transmittance of samples were measured and also their surfaces were observed by SEM. Chemical durabilities of these samples were increased with increasing MgF2 contents. The following various properties were increased rapidly up to 10 hours after that changed slowly. The sample after leached at 95$^{\circ}C$ during 100 hrs showed 0.5mg/$\textrm{cm}^2$ in weight loss. The pH of leached solution is 6.2 and concentration of Mg, Sr, and Ba element of that leached solution were 24,115 and 125 ppm, respectively. The infrared transmittance of leached sample decreased 7% compare to unleached one. And also SEM photomicrograph and EDS analysis showed that the corrosion of samples were decreased with respect to increasing MgF2 content.

• 한국환경과학회지
• /
• 제26권4호
• /
• pp.543-547
• /
• 2017

Normalized Difference Vegetation Index (NDVI) has played an important role in assessing green plant biomass through remote sensing on global scale since the early 1970s. The concept of NDVI is based on the fact that green plants show higher reflection in near-infrared region than in visible region of the electromagnetic spectrum. However, it is well known that the relocation of chloroplasts in plant leaf cells may dramatically change the optical properties of plant leaves. In this study I traced the changes in the reflectance and transmittance properties of Tobacco leaves at the wavelengths of 660 and 800 nm after a sudden increase in light intensity. The results showed that NDVI of leaves gradually decreased from 72.7% to 69.9% when exposed to a sudden increase in light intensity from 30 to $1,200{\mu}mol/m^2{\cdot}s$. This means that the error resulting from the physiological status of the plant should be accounted for a more precise understanding of ground truth corresponding to the data from the remotely acquired images.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.67-72
• /
• 2011

The aim of this study is to evaluate how much would the building energy consumption be saved by applying DSSC BIPV window which is possible to control the transmittance and express the color in the office building. For this, physical characteristics such as transmittance and reflectance, U-factor of DSSC areanalyzed and an annual energy consumption that is connected to dimming control is calculated when DSSC BIPV window is applied by alternate clear window system. As a result, It is possible to reduce the anannual energy consumption as much as4.1% by just change the clear double window system to DSSC BIPV double window system because the major factor to reduce energy consumption in the office that has much cooling load than other building is SHGC. When the thermal insulation properties of DSSC BIPV window with low-e coating and making triple window are improved, energy saving ratio is about 9%. Plus, energy saving ratio of 25~28% in lighting energy consumption is possible when the dimming control system with DSSC BIPV window is adopt.

• 소성∙가공
• /
• 제27권4호
• /
• pp.211-221
• /
• 2018

To estimate the recycling feasibility of high melt-indexed polycarbonate, 3.5 inch LGP, tensile, flexural and impact specimens were injection-molded and the LGP was shredded into scraps. The scraps were injection-molded again and this process was repeated for 4 times. Properties of the sample, i.e., optical properties, mechanical properties and number average molecular weight were measured at each cycle. Based on the results, as the number of reprocessing increased, transmittance decreased at low wavelength and color coordinate was changed systematically to yellow. Yellow index increased more than twofold during 4 recycling processes. On the other hand, the number average molecular weight decreased during recycling processes. Flexural and impact strength showed no tendency according to the number of recycling, but tensile strength decreased sharply after the third recycling process. Based on these properties, it was concluded that the number of recycling for high melt-indexed polycarbonate allowed in this study was one.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.64-64
• /
• 2010

This paper presents the results of changes of optical properties of front materials in crystalline PV modules. If PV modules on the outdoor, transmittance of front materials is reduced by solar light. That is UV, IR included Solar spectrum will have change the properties of glass. Therefore decrease in transmittance leads to loss of the PV modules output. All the PV modules showed the loss in Isc by 1~5% within few hors. To investigate the changes we are analyzed using spectrophotometer from raw glass to laminated glass.

• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.435-440
• /
• 2020

고주파 마그네트론 스퍼터링으로~500 nm 두께의 ZnO:Al막을 증착하였다. 증착된 ZnO:Al막을 100 ℃, 200 ℃, 300 ℃ 및 400 ℃에서 10시간 동안 열처리하였다. ZnO:Al막의 열처리에 따른 저항률, 캐리어 농도 및 이동도 변화를 측정하였다. XRD, FESEM 결과를 통해 열처리에 따른 ZnO:Al막의 저항률 변화 원인을 조사하였다. ZnO:Al막의 광 투과율을 측정한 후 에너지 밴드 갭, Urbach 에너지 및 굴절률을 도출하였다. ZnO:Al막의 전기적 특성 변화를 광특성과 연관지어 설명하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.228.2-228.2
• /
• 2014

Characteristics of high Fermi velocity, high mechanical strength, and transparency offer tremendous advantages for using graphene as a promising transparent conducting material [1] in electronic devices. Although graphene is a prospective candidate for touch sensor with strong mechanical properties [2] and flexibility, only few investigations have been carried out in the field of sensor as a device form. In this study, we suggest ultra-highly sensitive and transparent graphene touch sensor fabricated by single layer graphenes. One of the graphene layers is formed in the top panel as a disconnected graphene beam transferred on PDMS, and the other of the graphene layer is formed with line-patterning on the bottom panel of triple structure PET/PI/SiO2. The touch sensor shows characteristics of flexible. Its transmittance is approximately 75% where transmittance of the top panel and the bottom panel are 86.3% and 87%, respectively, at 550 nm wavelength. Sheet resistance of each graphene layer is estimated as low as $971{\Omega}/sq$. The results show that the conductance change rate (${\Delta}C/C0$) is $8{\times}105$ which depicts ultra-high sensitivity. Moreover, reliability characteristic confirms consistent behavior up to a 100-cycle test.

• KIEAE Journal
• /
• 제13권1호
• /
• pp.65-74
• /
• 2013

Recently, greenery system is frequently applied on buildings and artificial grounds to improve urban ecological functionality. Specifically, architectural greenery is also known as an architectural language that can meet the sustainable design concept of architects. Although the architectural greenery system can be optimized through an interdisciplinary approach between architecture, horticulture and landscape- architecture, there is a problem of communication on the ideal gap between them. Therefore, this study is expected to establish the comtemporary architecture as hi-tech and the organic architecture in internationalism. Moreover, it can analyze the case study on architectural greenery system designed by a Pritzker Prize winner who represents the comtemporary architectural trend. In this analysis, we calculate and compare the U-value of the free-form surface system based on the international standards: ISO and CIBSE etc. Moreover, we calculate a change of artificial soil transmittance respect on compounding ratio of the bottom ash and pearlite. In the case of California Academy of Science by Renzo Piano, total transmittance of the greenery system results in 48% of domestic thermal insulation standard in dry condition. This result will be used as a basic study to promote developing the advanced system based on the concept of consilience.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 춘계학술대회 논문집
• /
• pp.27-30
• /
• 1988

This paper is investigated on the sublimation in obliguely deposited a-$Se_{75}Ge_{25}$ films. With varying the treatment conditions, the transmittance in each of $0^{\circ}$, $60^{\circ}$, and $80^{\circ}$-deposited films and the absorbance in $80^{\circ}$-deposited film were measured. By increasing the angle of deposition, the variation of transmittance in post-exposure annealing film showed the characteristic different from that in only exposed film or annealed film. And the changes of thickness in $80^{\circ}$-deposited film were measured. The results showed that the changing rate of thickness was 1.4% in exposed film and 9.4% in post-exposure annealing film. Therefore, in $80^{\circ}$-deposited film, the possibility for sublimatin due to physical and chemical change by post-exposure annealing can be suggested.