• Journal of Information Display
• /
• v.10 no.2
• /
• pp.68-71
• /
• 2009

A replica-molding method of fabricating a dual-gap substrate for transflective liquid crystal (LC) displays is demonstrated. The dual-gap substrate provides homeotropic alignment for the LC molecules without any surface treatment and embedded bilevel microstructure on one of the two surfaces to maintain different cell gaps between the transmissive and reflective subpixels. The proposed transflective LC cell shows no electro-optic disparity between two subpixels and reduces the panel thickness and weight by 30% compared to the conventional transflective LC cell, which has two glass substrates.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.54-57
• /
• 2005

We have designed a single gap transflective liquid crystal display (LCD) driven by a fringe electric field, in which the +LC (${\Delta}{\varepsilon}$=7.4, rubbing angle= $80^{\circ}$) is homogeneously aligned in the initial state. This device is a problem that the voltage-dependent transmittance and reflectance curves do not match each other. Thus a dual driving circuit is required. This study shows that optimization of the rubbing angle in the transmissive and reflective regions solves this problem so that the transflective display with a single cell gap and single gamma curve for reflective and transmissive region is possible.

• Journal of Information Display
• /
• v.12 no.1
• /
• pp.11-15
• /
• 2011

An inverse-twisted-nematic (ITN) transflective (TRF) liquid crystal (LC) display, where two imprinted optical films (IOFs) with surface microstructures are embedded was developed. One of the IOFs serves as an in-cell patterned retarder with multioptic axes, and the other behaves as a viewing-angle enhancement film. In the presence of an applied voltage, the surface microstructures on the IOFs provide the spontaneous twist of the LC from a vertically aligned state to a $90^{\circ}$ twisted-nematic (TN) state in the transmissive part, and to a $45^{\circ}$ TN state in the reflective part. The developed ITN TRF LC display exhibits high transmission and reflectance, fast response, and wide-viewing characteristics, along with achromaticity.

• Journal of Information Display
• /
• v.9 no.4
• /
• pp.1-5
• /
• 2008

This paper investigates the effect of the electrode edge of a patterned vertical alignment (PVA) liquid crystal (LC) device on the viewing angle characteristics. In general, a transmissive LCD applies an LC layer with half-wave retardation for a bright state and with zero retardation for a dark state. The retardation of the LC layer would be distorted in each point, however, when a voltage is applied because of the non-uniform voltage distribution in the electrode edge effect. In this paper, the feasibility of the full effect of the electrode edge on the viewing angle property is considered, and the optical viewing angles of the VA LCD with a uniform half-wave LC layer and the PVA LCD with a practical non-uniform LC layer are compared.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.567-570
• /
• 2004

We have designed a single gap transflective liquid crystal display (LCD) driven by a fringe electric field, in which the LCs are homogeneously aligned in the initial state. In the reflective and transmissive areas, the degrees of the rotation of the LC director are $22.5^{\circ}$ and $45^{\circ}$, respectively. Utilizing this mechanism and an in-cell retarder with a quarter-wave plate that is used below the LC layer, the transflective LCD using fringe-field switching (FFS) mode is realized.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.12
• /
• pp.1068-1071
• /
• 2007

When a dielectric layer, in-cell retarder (ICR) is formed between electrode and LC layer to get a single gap transflective fringe-field switching (FFS) display, the operating voltage ($V_{op}$) is highly increased due to the thickness of dielectric material. But, we also knew the phenomenon that the increasing rate of Vop is different whether the 1st common electrode was composed of plate type or slit type. In this paper, the common electrode in transmissive part was composed of slit type which had less steepness effect of the Vop and in reflective part was composed of plate type. The rubbing angle of reflective part can be adjusted properly to match the voltage dependent transmittance and reflectance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.435-436
• /
• 2007

In general, Single gap transflective FFS display has an in-cell retarder (ICR) between reflective electrode and liquid crystal (LC) layer. Therefore, Operating voltage is highly increased due to this thick dielectric material. But, we also knew the phenomenon that the increasing rate of Vop is different whether the 1st common electrode was composed of plate type or slit type. In this paper, the common electrode in transmissive part was composed of slit type which had less steepness effect of the V op and in reflective part was composed of plate type. The rubbing angle of reflective part can be adjusted properly to match the voltage dependent transmittance and reflectance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.293-294
• /
• 2009

We proposed a novel single gap transflective liquid crystal display (LCD) using liquid crystal with negative dielectric anisotropy. We designed cell structure driven by fringe electric field in the transmissive (T) part and vertical electric field in the reflective (R) part. In the device, high surface pretilt angle of the LC in the R-part is achieved through polymerization of an UV curable reactive mesogen (RM) monomer at surfaces. By optimizing the parameters, a newly developed transflective display has characteristics such as single gap and single gamma curve.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1529-1532
• /
• 2006

Depending on the optical design method, a novel dual-mode transflective LCD with proper LC material and optical films was developed. The design increased the optical transmittance and the reflectivity of dual-mode transflective LCDs with the proper parameters of cell gap, alignment layer and optical films. These parameters were evaluated by computer simulation. The simulation results also revealed that the transmissive and reflective states presented similar performance in the transflective LCDs.