• 한국수산과학회지
• /
• 제36권5호
• /
• pp.528-534
• /
• 2003

The 2-D hydraulic experimental results for the submerged rubble-mound structure, we have been concerned with the slability/function characteristics of the structures by the effects of wave force, scour/deposition at the toe and the wave transmission ratio at the lee-side sea. So, to investigate the variation characteristics of the wave transmission ratio which depended on a geometrical structure of the submerged breakwater profiles, the critical conditions for the depth of submergence and crest width were obviously presented. In summary, the results lead us to the conclusion that the wave control capabilities of submerged breakwaters by the variation of the submergence depth is higher than about 4 times the degree at the efficiency than the that of crest width. The destruction of the covering block at the crest generated at the region which was located between the maximum and minimum damage curve, and it's maximum damage/failure station from the toe of the structure was $0.2\;L_s.$ As the wave transmission coefficient and the slope of the structure increase, the damage/failure ratio and the maximum scour depth at the toe was extended, respectively. When the maximum scour depth happened, the destruction of the covering block which was located at the toe generated at the front of the submerged rubble-mound breakwater. Finally, it was found from the results that the optimization of the structure may be obtained by the efficient decision of the submergence depth and crest width in the permissible range of the wave transmission ratio.

• 한국산학기술학회논문지
• /
• 제21권1호
• /
• pp.277-283
• /
• 2020

기계식 기어의 치를 영구자석으로 대체한 동심 마그네틱 기어에서 원주방향을 따라 놓인 모든 자석이 동력 전달에 관여하므로 감속비를 결정하는 자석의 극수비는 마그네틱 기어의 거동 특성에 큰 영향을 미친다. 본 논문에서는 극수비를 변화시켜가며 마그네틱 기어에서 생성되는 전달토크의 밀도, 동손을 고려한 토크의 효율, 코깅 특성을 포함한 토크의 품질 등을 유한요소 해석을 이용하여 비교 분석하였다. 구동측의 극수를 2극에서 5극까지 변화시킬 때 전달토크가 최대가 되는 최적의 극수비가 존재함을 확인하였으며 이는 모듈레이터를 통한 구동측 자기장의 필터링 성분에 직접적인 영향을 받다. 전달 효율 역시 와전류 생성 밀도와 자기장간에 비례특성이 있으므로 전달 토크 밀도와 유사한 경향을 나타내는 것을 알 수 있으며 낮은 기어비에서는 95% 이상의 효율을 보인다. 제한된 극수를 갖는 영구자석의 상호작용에 기인하는 코깅 특성은 일반적인 동기 모터에서와 같이 구동측 자석의 개수와 모듈레이터 치의 개수간의 최소공배수에 반비례하는 것을 확인할 수 있었다. 전달 토크 평가를 위해 실제 시험 모델이 제작되었고 실증시험이 진행되었다.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.54-66
• /
• 1998

In a passenger car automatic transmission, the gear ratio is determined by the combination of clutches and brakes, and each element of th planetary gear set is rotated or held stationary by the action of them. In this study, to investigate the shift characteristics of automatic transmission, the equations of motion are derived from the dynamic model of Ravigneaux type planetary gear set and solved analytically. The shift characteristics of each element of planetary gera set during gear ratio change are investigated by considering the torques and velocities of input, reaction and output elements.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.172-181
• /
• 1997

The dynamic characteristics during gear ratio change including the disturbance of output torque has been one of the most important issues in the study of automatic transmissions of passenger cars. In this paper, to investigate the dynamic characteristics of a passenger car automatic transmission during gear ratio change, a dynamic model of the driveline of a passenger car focused on the automatic transmission is proposed and the dynamic simulation program is developed. The results of the simulation show good agreements with the experimental data, which process the use fullness of the dynamic model and the simulation of the driveline.

• Journal of Biosystems Engineering
• /
• 제27권6호
• /
• pp.479-490
• /
• 2002

A dynamic model of a power shuttle transmission was developed and its validity was verified using the experimental data obtained from a transmission test bench. A 40㎾, 4WD tractor was also modeled using an application software EASY5 to investigate parameters and their effects on the power shifting performance. For a tractor model, the manual reverse gear was replaced by a power shuttle transmission. The tractor model also included an engine, main-gears for transmission, wheels, differentials and planet gears. Using the tractor model, the effects of the parameters such as modulating pressure and time, engine speed, tractor speed. tractor weight. reverse to forward speed ratio and torsional damper on the transient characteristics at starting and shuttle shifting were investigated by the computer simulation. The transient characteristics were represented by variations in clutch pressure, torque transmitted to input shaft and driving wheels, and power transmission capacity of the clutch. It was found that the modulating pressure and time affected most significantly the torque transmission and shifting time. The input torque, axle torque, power transmission capacity of the clutch and transmission time all increased with increase in engine speed, tractor speed. tractor weight and ratio of reverse to forward speeds. However, the axle torque decreased with tractor speed. Both the axle torque and power transmission capacity of the clutch also decreased with the ratio of reverse to forward speeds.

• 한국정밀공학회지
• /
• 제23권3호
• /
• pp.86-93
• /
• 2006

This study is concerned with the investigation of characteristics of an AMT (Automated Manual Transmission) which are composed of clutch part and transmission part. When a shilling signal is received from the controller, the clutch is disengaged first, and shifting action including selecting action is followed, and then the clutch is engaged last. The characteristics of transmission shifting response are affected by various parameters of clutch and transmission control elements. Analytical results are in fair agreement with experimental results. It is found that the operating pressure level is the most important for the response of AMT characteristics, and that the other parameters such as natural frequency and damping ratio of the control valve are less important.

• Journal of Electrical Engineering and Technology
• /
• 제6권6호
• /
• pp.829-835
• /
• 2011

A power frequency magnetic field reduction method using passive loop is presented. This method can be used to reduce magnetic fields generated within the restricted area near transmission lines by alternating current overhead transmission lines. A reduction algorithm is described and related equations for magnetic field reduction are explained. The proposed power frequency magnetic field reduction method is applied to a scaled-down transmission line model. The lateral distribution of reduction ratio between magnetic fields before and after passive loop installation is calculated to evaluate magnetic field reduction effects. Calculated results show that the passive loop can be used to cost-effectively reduce power frequency magnetic fields in the vicinity of transmission lines generated by overhead transmission lines, compared with other reduction methods, such as active loop, increase in transmission line height, and power transmission using underground cables.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.659-663
• /
• 1998

To measure the absorption ratio and the transmission loss of a material, a usage of the reverberation room has been popular. However, the reverberation room is expensive to build it and, sometimes, test procedure is not easy. Therefore, to get the data of absorption ratio, several possible technologies has been proposed using the tube. Among these technologies, with the analysis of the spectral density, a convenient method has been introduced to measure both the absorption ratio and transmission loss. The measured data has been compared with the results of the measurement at the reverberation room.

• International Journal of Railway
• /
• 제3권2호
• /
• pp.39-45
• /
• 2010

The RF-CBTC (Radio Frequency-Communication Based Train Control) System is a communication system in railroad systems. The communication method of RF-CBTC system is the wireless between the wayside device and on-board device. The wayside device collects its location and speed from each train and transmits the distance from the forwarding train to the speed-limit position to it. The on-board device controlling device controls the speed optimum for the train. In the case of the RF-CBTC system used in Korea, transmission frequency is 2.4 [GHz]. It is the range of ISM(Industrial Scientific and Medical equipment) band and transmission of voice and data is performed by CDMA (Code Division Multiple Access) method. So noises are made in the AWGN (Additive White Gaussian Noise) and fading environment. Currently, the SNR (Signal to Noise Ratio) is about 20 [dB], so due to bit errors made by noises, transmission of reliable information to the train is not easy. Also, in the case that two tracks are put to a single direction, it is needed that two trains transmit reliable voice and data to a wayside device. But, by noises, it is not easy that just a train transmits reliable information. In this paper, we estimated the BER (Bit Error Rate) related to the SNR of voice and data transmission in the environment such as AWGN and fading from the RF-CBTC system using the CDMA method. Also, we supposed the SNR which is required to meet the BER standard for voice and data transmission. By increasing the processing gain that is a ratio of chip transmission to voice and data transmission, we made possible voice and data transmission from maximally two trains to a wayside device, and demonstrated it by using Matlab program.

• Journal of Biosystems Engineering
• /
• 제19권4호
• /
• pp.291-300
• /
• 1994

It is desired to operate tractor engines at or near maximum torque much of the time in field operation to increase fuel efficiency. To do this it is necessary to reduce engine speed and to shift gears to higher ratios as frequently as possible. Because of load variations in most drawbar work and inconvenience in gear shift, however, gear-type transmission are usually set in one ratio at unnecessarily high engine speeds, and engine-torque variations are used to compensate for changes in drawbar load. As a result, the most of time the tractor is not operated efficiently in terms of fuel consumption and work output. The objective of this study was to develop an automatic control system which is able to operate a tractor equipped with gear transmission under the optimal condition in terms of fuel efficiency with automatic governor setting and gear shift. An indoor experimental test set which can be used to simulate tractor operation, control engine speed and transmission ratio was developed in the previous paper. In this paper, the performance of the optimal operation system is reported. Through a series of tests, it was found that the automatic control system for optimal operation of tractors with gear transmission had a satisfactory performance.