• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.291-291
• /
• 2002

DGPS(Differential Global Positioning System) and RTK(RealTime Kinematic) is in one of today's most widely used surveying techniques. But It's use is restricted by the distance between reference station and rover station and it is difficult to process data in realtime by it's own orgnizational limitation in precise measurement of positioning. To meet these new demands, In This paper, new DGPS and RTK correction data services through Internet and PSTN(Public Switched Telephony Network) have been proposed. For this purpose, we implemented performance a DGPS and RTK error correction data transmission system for long-distance using the internet and PSTN network which allows a mobile user to increase the distance at which the rover receiver is located from the reference in realtime. and we analyzed and compared DGPS and RTK performance by experiments through the Internet and PSTN network with the distance and the time.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.302-309
• /
• 2004

The transmission capacity of wireless communication systems may become dramatically high by employ multiple transmit and receive antennas with space-time coding techniques appropriate to multiple transmit antennas. For large number of transmit antennas and at high bandwidth efficiencies, the receiver may become too complex whenever correlation across transmit antennas is introduced. Reducing decoding complexity at receiver by combining array processing and space-time codes (STC) helps a communication system using STC to overcome the big obstacle that prevents it from achieving a desired high transmission rate. Multi-carrier CDMA (MC-CDMA) allows providing good performance in a channel with high inter-symbol interference. Antenna array, STC and MC-CDMA system have a similar characteristic that transmit-receive data streams are divided into sub-streams. Thus, there may be a noticeable reduction of receiver complexity when we combine them together. In this paper, the combination of array processing and STC in MC-CDMA system over slow selective-fading channel is investigated and compared with corresponding existing MC-CDMA system using STC. A refinement of this basic structure leads to a system design principle in which we have to make a trade off between transmission rate, decoding complexity, and length of spreading code to reach a given desired design goal.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.237-239
• /
• 2004

Sapporo subway sets up the integrated information system to be aim at the effective and automatic work from the first time. They are expanding integrated system by introducing IT into Serve system positively which developed for recent several years. To keep up with the big size and high speed of information according to integrated system,. the integrated transmission line system which is basic of the integrated system is changed into the system which apply the newest technology. Also, they are aimed at the next generation traffic system through the cooperation of the local administration, for example, test of the multipurpose card using non-contact IC card. This study reviewed the present state of Sapporo subway, the upgrade of information transmission system, and the function of each serve system those are the order of equipment, management of the running, management of the disaster presentation, signal protection, passenger management etc.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권8호
• /
• pp.2923-2943
• /
• 2021

The double helix structure of DNA makes it diverse, stable and can store information with high density, and these characteristics are consistent with the requirements of molecular communication for transport carriers. In this paper, a specific structure of molecular communication system based on DNA length coding is proposed. Transmitter (Tx) adopts the multi-layer golden foil design to control the release of DNA molecules of different lengths accurately, and receiver (Rx) adopts an effective and sensitive design of nanopore, and the biological information can be converted to the electric signal at Rx. The effect of some key factors, e.g., the length of time slot, transmission distance, the number of releasing molecules, the priori probability, on channel capacity is demonstrated exhaustively. Moreover, we also compare the transmission capacity of DNA-based molecular communication (DNA-MC) system and concentration-based molecular communication (MC) system under the same parameter setting, and the peak value of capacity of DNA-MC system can achieve 0.08 bps, while the capacity of MC system remains 0.025 bps. The simulation results show that DNA-MC system has obvious advantages over MC system in saving molecular resources and improving transmission stability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권3호
• /
• pp.1311-1324
• /
• 2019

In the traditional cellular network communication, the cellular user and the base station exchange information through the uplink channel and downlink channel. Meanwhile, device-to-device (D2D) users access the cellular network by reusing the channel resources of the cellular users. However, when cellular user channel conditions are poor, not only D2D user cannot reuse its channel resources to access the network, but also cellular user's communication needs cannot be met. To solve this problem, we introduced a novelty D2D communication mechanism in the downlink, which D2D transmitter users as half-duplex (HD) relays to assist the downlink transmission of cellular users with reusing corresponding spectrum. The optimization goal of the system is to make the cellular users in the bad channel state meet the minimum transmission rate requirement and at the same time maximize the throughput of the D2D users. In addition, i for the purpose of improving the efficiency of relay transmission, we use two-antenna architecture of D2D relay to enable receive and transmit signals at the same time. Then we optimized power of base station and D2D relay separately with consideration of backhaul interference caused by two-antenna architectures. The simulation results show that the proposed HD relay strategyis superior to existing HD and full-duplex (FD) models in the aspects of system throughput and power efficiency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.437-439
• /
• 2000

This paper describes a fault location technique using wavelets in underground transmission cable system Estimation of fault location is performed using data sampled at two ends of underground system. In the case of 50% fault of total underground transmission line, fault location is calculated using sampled single-end data in underground transmission line. Traveling wave is utilized in capturing the travel time of the transients along the monitored lines between the relay and the fault point. This travel time information is provided by the wavelet. Simulation was performed using EMTP. ATP Draw and MATLAB. The results of fault location shown in this paper will be evaluated as an effective suggestion for fault to location in real underground transmission line.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권12호
• /
• pp.608-613
• /
• 2000

This paper describes a fault location technique using wavelets in underground transmission power cable system. Estimation of fault location is performed using data smapled at two ends underground system. In the case of 50% fault of total underground transmission line, fault location is calculated using sampled single-end data in underground transmission line. Traveling wave is utilized in capturing the travel time of the transients along the monitored lines between the relay and the fault point. This traveling time information is provided by the wavelet. Simulation was performed using EMTP, ATP Draw and MATLAB. The results of fault location shown in this paper will be evaluated as an effective suggestion for fault location in real underground transmission line.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.473-476
• /
• 2003

In this paper, presents a way to maximize transmission efficiency and reception ability through transmission diversity technology, which can be adapted to wireless multimedia OFDM system. The presented method is a comparative analysis between a case where parameter a for time average is 0.3, 1 with consideration of channel presumption with two types of rms delayed proliferation, which is 50nsec, 150nsec, for the performance analysis of STTC(Space-Time Trellis Code) using time-space code method appropriate for MIMO channel, and performance in the case where presumed channel value from long training column section is applied to according frame in a single frame. The result showed that BER brought SNR improvement of 1.0dB in 10$^{-3}$ when a was 0.3 than using only the long training column, and showed increase of general performance improvement for the sake of time average rather than the case without.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권9호
• /
• pp.2213-2231
• /
• 2013

Compressed sensing is a novel technology used in the field of wireless communication and sensor networks for channel estimation, signal detection, data gathering, network monitoring, and other applications. It plays a significant role in highly secure, real-time, well organized, and cost-effective data communication in smart-grid (SG) systems, which consist of multi-tier network standards that make it challenging to synchronize in power management communication. In this paper, we present a multi-layer communication model for SG systems and propose compressed-sensing based data transmission at every layer of the SG system to improve data transmission performance. Our approach is to utilize the compressed-sensing procedure at every layer in a controlled manner. Simulation results demonstrate that the proposed monitoring devices need less transmission power than conventional systems. Additionally, secure, reliable, and real-time data transmission is possible with the compressed-sensing technique.

• 전자공학회논문지SC
• /
• 제44권5호
• /
• pp.18-29
• /
• 2007

본 논문에서는 다중 패킷을 전송하는 네트워크 제어시스템을 대상으로, 전체 시스템의 안정성 변화를 분석할 수 있는 새로운 방법을 제안하였다. 먼저, 메시지의 최대 시간 지연을 보장할 수 있는 스케쥴링 방식과 데이터 손실을 나타낼 수 있는 이산 스위치 상태방정식을 새롭게 제시하였으며, 이를 이용하여 네트워크 제어시스템과 등가인 비동기 시스템(asynchronous dynamical system)을 유도하였다. 이후, 제어기의 샘플링 주기, 시간 지연, 데이터 전송 성공률, 전송 패킷의 개수에 따라 변화하는 네트워크 제어시스템의 안정성을 판별할 수 있도록 새로운 정리들을 제안하였다. 마지막으로, Batch Reactor 시스템을 대상으로 제안한 정리들을 적용하여 시뮬레이션하고 그 결과를 분석함으로써 본 논문에서 제안한 안정성 분석 방법의 타당성을 입증하였다.