• ETRI Journal
• /
• v.26 no.2
• /
• pp.92-100
• /
• 2004

In this paper, we propose an efficient method to broadcast digital television signals using single frequency networks (SFNs) within the Advanced Television Systems Committee (ATSC) transmission systems. In implementing the SFNs of an 8-vestigial side band (8-VSB) Digital Television (DTV) system, the ambiguity problem of the trellis coder is unavoidable in a conventional ATSC transmission system. We propose a memory initialization of the trellis coder to resolve this ambiguity problem. Since the proposed scheme to synchronize multiple transmitters minimizes the changes from the conventional ATSC system, the hardware complexity for these changes is very low. Our simulation results show that the proposed scheme makes a less than 0.1 dB degradation at the threshold of visibility with a bit error rate of $3{\times}10^{-6}$ in the additive white Gaussian noise (AWGN) channel. It is possible to reduce the performance degradation by increasing the initialization period of the proposed scheme.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.3
• /
• pp.11-20
• /
• 2010

The purpose of this study is the investigation of the wave interaction with the rectangular floating breakwater. The flow profile obtained by PIV technique is represented to understand the vortical flow due to the wave interaction with a rectangular floating breakwater in the roll motion and the fixed condition. Also, the transmission coefficients are compared in both conditions over the extensive wave periods, which represent the performance of breakwater to attenuate the incoming waves. These results would be applied to design the floating breakwater having the mooring system to improve its performance for a certain wave period.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.393-398
• /
• 2010

For multi-cell environments, coordinated random beamforming technique in multiuser MIMO(multiple-input multiple-output) broadcast channel is considered. In order to mitigate severe interference at receivers, the multi-cell environments might require complex transmitter and receiver design because the scheduler decision based on full channel state information (CSI) in one cell must be intertwined with decision made by other cells' CSI. With limited CSI, however, this paper considers a scheme of randomizing transmitters' beamforming but being coordinated with other cell transmitters. The transmitters in each cell share random beamforming patterns and schedule data transmission within coherent scheduling period. The corandomized beams allow the users to be selected with the highest SINRs even in multi-cell environments. We analyze the performance of the proposed scheme. And numerical results show that the scheme achieves better performance than the conventional random beamforming when applying to multi-cell environments.

• Journal of the Optical Society of Korea
• /
• v.7 no.2
• /
• pp.97-101
• /
• 2003

The transmission characteristics of multi-channel long period fiber gratings (LPFGs) in terms of the physical parameters like the separation distance, grating length and number of gratings will be discussed. Their transmission characteristics such as channel spacing, number of channels, loss peak depth, and channel bandwidth can be easily controlled by physical parameters. Based on the experimental results, their applications to optical multiwavelength Raman lasers and optical sensors will be investigated. A multiwavelength Raman fiber ring laser with 9 WDM channels with 100 ㎓ spacing and 19 channels with 50 ㎓ spacing using tunable multi-channel LPFGs will be experimentally demonstrated. The fiber-optic sensing applications with high resolution and sensitivity based on multi-channel LPFGs will be also presented.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.3
• /
• pp.231-241
• /
• 2017

The purpose of this study was to analyze traffic safety assessments for fishing vessels near the southwest offshore wind farm. This study applied a collision model for safety assessment. It also involved a spatiotemporal analysis of vessels engaged in fishing to identify fishing hotspots around the offshore wind farm. This study used data from fishing vessel location transmission devices gathered over 1 year in 2014. As a result, in September, when the average number of vessels engaged in fishing is high, 62 ships were operating in fishing section 184-6 and 55 ships in section 184-6. In addition, in fishing sections 184-8 and 192-2, where an offshore wind farm was located, there were 55 and 38 ships operating, respectively. As the recovery period for a seaway near wind farm turbines is 55 years, it was determined that safety measures are required in order to reduce collision frequency while allowing fishing vessels to navigate through offshore wind farms. Meanwhile, the return period of Seaway B between the groups of generators considered was 184 years. A safety zone for offshore wind farms should be installed covering a distance of at least 0.3 NM from the boundary of turbines. Then, the collision return period was derived to be close to 100 years. Through this traffic safety assessment, it has been concluded that such measures would help prevent marine accidents.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.74
• /
• pp.1-23
• /
• 2017

The buyer must examine the goods, or cause them to be examined, within as short a period as is practicable in the circumstances. Article 38 lays down a fundamental principle that requires the buyer to examine quickly the goods delivered by the seller. Article 38 (1) provides that the examination be made within as short a period as practicable in the circumstances. The goods have to be examined within as short a period as is practicable in the circumstances. The rule is based on the fundamental idea of reasonableness, meaning that the buyer must examine the goods as soon as reasonably possible. It may be said that the buyer should act reasonably fast. Article 38 (2), (3) concerns sales involving carriage of the goods, where the seller's obligation to deliver consists in handing the goods over to the first carrier for transmission to the buyer. In this case the buyer is generally able to examine the goods only after they have come to destination. Article 38 (3) takes into account the case where the buyer redirects the goods in transit or re-dispatches them to another destination. Redirection in transit occurs when the destination is changed before the goods are received by the buyer. The buyer could re-dispatch the goods without having them unloaded, or re-dispatch them through another carrier.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.1866-1888
• /
• 2017

Efficient energy consumption in WSN is one of the key design issues for improving network stability period. In this paper, we propose a new Heterogeneity-aware Energy-efficient Clustering (HEC) technique which considers two types of heterogeneity - network lifetime and of sensor nodes. Selection of cluster head nodes is done based on the three network lifetime phases: only advanced nodes are allowed to become cluster heads in the initial phase; in the second active phase all nodes are allowed to participate in cluster head selection process with equal probability, and in the last dying out phase, clustering is relaxed by allowing direct transmission. Simulation-based performance analysis of the proposed technique as compared to other relevant techniques shows that HEC achieves longer stable region, improved throughput, and better energy dissipation owing to judicious consumption of additional energy of advanced nodes. On an average, the improvement observed for stability period over LEACH, SEP, FAIR and HEC- with SEP protocols is around 65%, 30%, 15% and 17% respectively. Further, the scalability of proposed technique is tested by varying the field size and number of sensing nodes. The results obtained are found to be quite optimistic. The impact of energy heterogeneity has also been assessed and it is found to improve the stability period though only upto a certain extent.

• Ocean and Polar Research
• /
• v.25 no.spc3
• /
• pp.423-426
• /
• 2003

The seawater exchange breakwater equipped with an oscillating water channel and water transmitting pipes has a very spectacular function that seawater supply can be greatly increased due to the upsurge of the water surface inside the channel at resonance condition which can be reached when the incident wave period becomes close to the natural period of the channel. The variations of the water level and period inside the channel are very important factors in enhancing the efficiency of sea water exchange, especially when designing the breakwater cross-section in shallow water zone which requires longer resonance period with the elongated horizontal projection of the channel. In the present study, a hydraulic experiment was performed varying the length of the oscillating channel, and the resonance periods and water surface variations are analyzed in terms of water transmission through the pipes.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.502-512
• /
• 2016

The wireless carrier sense multiple access with collision detection (WCSMA/CD) and carrier sense multiple access with collision resolution (CSMA/CR) protocols are considered representative distributed collision detection protocols for fully connected dense wireless local area networks. These protocols identify collisions through additional short-sensing within a collision detection (CD) period after the start of data transmission. In this study, we analyze their throughput numerically and show that the throughput has a trade-off that accords with the length of the CD period. Consequently, we obtain the optimal length of the CD period that maximizes the throughput as a closed-form solution. Analysis and simulation results show that the throughput of distributed collision detection protocols is considerably improved when the optimal CD period is allocated according to the number of stations and the length of the transmitted packet.

• Journal of the Korean Society of Food Culture
• /
• v.36 no.3
• /
• pp.265-273
• /
• 2021

The Chinese Sigyeong records the foods of the Primitive Pickling Period, pickling being a universal vegetable storage method, but does not indicate the origin of the pickled vegetables or the location of the source of transmission. Kimchi mainly used salt and sauce-based soaking materials at the beginning of the Fermented Pickling Period (beginning in the 1st to 3rd centuries A.D.), and it differed from the Chinese method, which used alcohol and vinegar. In the Umami-Flavored Pickling Period (beginning in the 14th and 15th centuries A.D.), jeotgal, fermented seafoods, were added, and pickles with a completely new identity were created, one different from any other pickles in the world. Lastly, entering the Complex Fermentation and Pickling Period (beginning in the 17th and 18th centuries), the technical process evolved using a separate special seasoning containing red pepper as the secondary immersion source after pickling in brine, the primary immersion source. As a result of this, kimchi was transformed into a food with a unique form and taste not found anywhere else. The unique characteristic of kimchi is that the composition of original materials, a combination of salted marine life and vegetable ingredients, is its core identity, and there is a methodological difference in that it is completed through a second process called saesaengchae (生菜)-chimchae (沈菜).