• 드라이브 ㆍ 컨트롤
• /
• 제11권3호
• /
• pp.1-6
• /
• 2014

In forklifts, the machine performance is largely depended on the transmission performance. The aim of this paper is to develop a complete model of transmission control valve (TMV) system of a typical forklift using AMESim simulation tool. By using the developed TMV model, it becomes easy to investigate the system concept, working principle, and performance. In addition, an optimization on the TMV structure can be achieved by using this model with tunable parameters. Simulations have been carried out in a comparison with the actual experiments to verify the model.

• 대한임베디드공학회논문지
• /
• 제6권3호
• /
• pp.149-156
• /
• 2011

Transmission delay and packet loss induced by a communication network can degrade the control performance and, even make the system unstable. This paper presents a method for compensating transmission delay and packet loss in a networked control system for unmanned underwater vehicle. The proposed method is based on Lagrange interpolation in order to satisfy the requirements of simplicity and model-independency. In this work, the lost/delayed data are estimated in real time by only using the past data without requiring any mathematical model of the controlled system. Consequently, the proposed method can be implemented independent of the controlled system, and also it can achieve fast and accurate compensation performance. The performance of the proposed technique is evaluated by numerical simulations with an unmanned underwater vehicle.

• Journal of Preventive Medicine and Public Health
• /
• 제42권6호
• /
• pp.408-415
• /
• 2009

Objectives : This study was performed to investigate the mumps transmission control status and inapparent infection rate among middle and high school students in Daegu City during a mumps outbreak. Methods : Nine schools (two middle schools and seven high schools), which reported a number of mumps cases between 2007 and 2008 were selected for investigation. During March-May 2008, a standard questionnaire was distributed to gather information about case identification, instructed isolation measure, isolation status of mumps cases and related factors, and outdoor activities of nonisolated mumps case. Inapparent infection rate was estimated by serum mumps IgM and IgG antibodies status and self-reported mumps symptoms in three of the nine schools. Results : Among 2,560 respondents, more than half of students answered that they did not receive instructions in mumps transmission control measures during the outbreak. Among the 327 mumps cases identified by the questionnaire, 131 cases (40.1%) were considered as isolated and the isolation rates were significantly different among schools, grades, and gender. Of the non-isolated cases, 88.3% continued attending school. Inapparent mumps infection rates were between 56.3% and 70.2%. Conclusions : Mumps transmission control was inadequate to control the mumps outbreak. Although high inapparent infection rate would mitigate the transmission control effect of case isolation, this measure is fundamental for infection control. The reasons of this inadequate status need to be explored to develop an effective intervention strategy.

• 한국정밀공학회지
• /
• 제12권7호
• /
• pp.148-157
• /
• 1995

This study deals with controlling the speed of Hydrostatic Transmission (HST) system throuth the control of pumping stroke of positive displacement pump using high-speed solenoid valve controlled by digital closed loop PWM method. The method which was done in this study is as follows: First, we modified original positive displacement pump and designed pumping stroke control system of HST by using the high-speed solenoid valve. Second, after experimenting static and dynamic characteristics on each signal flow, we identified system parameter of approximated model. Finally, to control the speed of HST, we controlled the angle of the swash plate of positive displacement pump by controlling the pressure in the control cylinder chamber. Test which was carried out in the laboratory shows that transient and steady state response could be improved by PID controller.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.2023-2032
• /
• 1993

This study suggests a new type shaft generating system driven by hydrostatic transmission suitable for small size vessels. Since the shaft generating system is affected ceaselessly by disturbances such as speed variation in pump driving speed and variation in external load, a robust servo control must be implemented to obtain stable electric power with constant frequency. Thus, in this study, a digital robust servo control algorithm is applied to the controller design. By the experiment and the numerical computation, the frequency variation characteristics of the generating system under various disturbances are investigated. Conclusively, it is said that the shaft generating system proposed in this study shows excellent control performances.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1466-1472
• /
• 2008

To minimize the train operation interruptions and train exchanges, the RF transmission system is proposed. The current control room of the Seoul Metro has information of the train movement through the Total Traffic Control System, but it does not have information of the train itself, rail status, and other facilities' status. When some trouble occurs during train operation, the train crews should report the control room about the trouble and fix it. If the control room has exact information of the trouble, the expert in the control room can help the crews to fix the trouble swiftly and exactly. Since the crews are busy taking care of the trouble, they often miss to report the control room on time. The proposed RF transmission system relays the information of the train to the control room automatically in real time, and makes it possible to provide the passengers good service by reducing the train operation interruptions and train exchanges.

• 한국음향학회지
• /
• 제31권5호
• /
• pp.280-287
• /
• 2012

본 논문은 능동 소나 송신기의 효율적인 회전 송신빔 구동을 위하여 부하인 원통형 배열센서의 회전 방위별 동적 임피던스 특성을 실험적으로 분석하고 최대 전력이 부하에 효과적으로 전송되도록 송신기의 출력을 실시간으로 제어하는 기법에 관한 연구이다. 회전 송신빔 구동시, 전기적, 음향적 경계조건에 의해 발생하는 과부하 조건에서 배열센서의 실시간 임피던스 변화와 송신기의 출력 거동 특성을 분석하였다. 그 결과로부터 과도 특성에서도 송신 중단 없이, 송신기와 부하를 보호하면서 송출되는 전력량을 최대화할 수 있는 새로운 송신 출력 제어 기법을 제안하고 실험을 통하여 제안된 기법을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.121.5-121
• /
• 2002

1. Introduction 2. Image Transmission 3. Hardware instrument 4. Image processing and control command transmission 5. System Configuration 6. Conclusion

• IMMUNE NETWORK
• /
• 제21권1호
• /
• pp.9.1-9.8
• /
• 2021

The most important characteristics of coronavirus disease 2019 (COVID-19) transmission that makes it difficult to control are 1) asymptomatic and presymptomatic transmission, 2) low incidence or lack of dominant systemic symptoms such as fever, 3) airborne transmission that may need a high infectious dose, and 4) super-spread events (SSEs). Patients with COVID-19 have high viral loads at symptom onset or even a few days prior to symptom onset, and most patients with COVID-19 have only mild respiratory symptoms or merely pauci-/null-symptoms. These characteristics of the virus enable it to easily spread to the community because most patients are unaware of their potential infectivity, and symptom-based control measures cannot prevent this type of transmission. Furthermore, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is also capable of airborne transmission in conditions such as aerosol-generating procedures, under-ventilated indoor spaces, and over-crowded areas. In this context, universal mask-wearing is important to prevent both outward and inward transmission until an adequate degree of herd immunity is achieved through vaccination. Lastly, the SSEs of SARS-CoV-2 transmission emphasize the importance of reducing contacts by limiting social gatherings. The above-mentioned transmission characteristics of SARS-CoV-2 have culminated in the failure of long-lasting quarantine measures, and indicate that only highly effective vaccines can keep the communities safe from this deadly, multifaceted virus.

• Journal of Biosystems Engineering
• /
• 제19권4호
• /
• pp.291-300
• /
• 1994

It is desired to operate tractor engines at or near maximum torque much of the time in field operation to increase fuel efficiency. To do this it is necessary to reduce engine speed and to shift gears to higher ratios as frequently as possible. Because of load variations in most drawbar work and inconvenience in gear shift, however, gear-type transmission are usually set in one ratio at unnecessarily high engine speeds, and engine-torque variations are used to compensate for changes in drawbar load. As a result, the most of time the tractor is not operated efficiently in terms of fuel consumption and work output. The objective of this study was to develop an automatic control system which is able to operate a tractor equipped with gear transmission under the optimal condition in terms of fuel efficiency with automatic governor setting and gear shift. An indoor experimental test set which can be used to simulate tractor operation, control engine speed and transmission ratio was developed in the previous paper. In this paper, the performance of the optimal operation system is reported. Through a series of tests, it was found that the automatic control system for optimal operation of tractors with gear transmission had a satisfactory performance.