• International Journal of Quality Innovation
• /
• 제10권1호
• /
• pp.115-126
• /
• 2009

Video transmission effectiveness in the Ad Hoc network is becoming important recently, if different routing protocols are applied. Some researchers conclude that the reactive protocols are better for file transfer protocol (FTP) and constant bit rate (CBR) or hypertext transfer protocol (HTTP) transmission in an Ad Hoc wireless network but the performance report of video transmission is not much. This study adopts Qualnet (Network Simulator) as a simulation tool for environmental designing and performance testing, and employs an experimental design with eight groups. Our experiment shows that: (1) The performance of AODV (reactive) protocol is better than DSDV, ZRP and DSR when the transmission load has only one video stream; (2) Proactive (DSDV) and Hybrid protocols (ZRP) are better for a smaller Ad Hoc network when it transmits a video stream with some applications (VoIP, FTP and CBR). We conclude that packet loss rate is sensitive to the quality of video transmission and it has negative relationship with Peak Signal-to-Noise Ratio (PSNR) value. In addition, our experiment also shows that PSNR is a simple Metric for the performance evaluation of video transmission.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.783-786
• /
• 2015

라우팅 정보에 대한 변화를 발생시켜 전송기능을 방해하는 홀 공격은 MANET(Mobile Ad-Hoc Network)과 같은 임시 통신망에 치명적인 결과를 초래한다. 홀 공격의 한 종류인 블랙홀 공격은 악성 노드인 블랙홀 노드가 라우팅 정보를 위조하여 네트워크 내에 전송되는 정보를 흡수함으로서 네트워크 성능을 마비시키는 악성공격의 일종이다. 블랙홀 공격이 MANET의 전송성능에 미치는 영향은 매우 크므로 다양한 네트워크 환경에 대해 블랙홀 공격이 미치는 전송성능을 분석하는 것은 매우 의미있는 일이다. 본 연구에서는 복수의 블랙홀 노드에서 발생된 블랙홀 공격이 MANET의 전송 성능에 미치는 영향을 분석해 본다. 분성 방법으로는 NS-2를 사용한 컴퓨터 시뮬레이션을 활용하며 분석대상 서비스로는 음성 트래픽을 사용한다.

• 대한산업공학회지
• /
• 제41권2호
• /
• pp.220-224
• /
• 2015

The DCF (Dcistributed Coordination Function) and PCF (Point Coordination Function) are the basic MAC (Medium Access Control) protocols of IEEE 802.11 wireless LANs. According to the DCF, each node performs the exponential backoff algorithm before the transmission of its data frame. Each node doubles the backoff waiting time before the transmission of its data frame whenever it detects the transmission collision with other nodes. Therefore, as the number of the active nodes having the data frames to transmit increases, the overall MAC performance of the DCF decreases. On the other hand, according to the PCF, each node is granted the transmission opportunity by which the PCF transmission is possible without the collision with other nodes. Therefore, as the number of the active nodes increases, the MAC performance of the PCF increases, In this paper, considering the tradeoff of MAC performance between the DCF and PCF, a hybrid MAC protocol is proposed to enhance the performance of IEEE 802.11 wireless LANs.

• 한국전자통신학회논문지
• /
• 제9권12호
• /
• pp.1359-1364
• /
• 2014

IEEE 802.11p는 차량통신 시스템의 대표적인 물리계층 및 매체접근제어계층 표준이다. IEEE 802.11p를 기반으로 한 통신시스템의 일대일 통신성능은 링크접속시간, 오류율, 전송용량 (throughput), 등의 다양한 형태로 측정되었다. 본 논문에서는 IEEE 802.11p기반 통신시스템을 이용하여 대용량으로 신호 전송 시 성능을 측정한다. 일대일 통신을 포함하여 최대 32개의 통신시스템을 사용하여 데이터를 전송하였을 경우에 대한 성능을 측정한다. 전송방식은 브로드캐스트와 유니캐스트 두 가지 경우에 대해 고려하며, 통신시스템의 성능은 수신율 및 전송용량을 이용하여 나타낸다.

• Journal of Communications and Networks
• /
• 제18권3호
• /
• pp.351-363
• /
• 2016

This paper investigates the performance of interference-limited two-way transmission protocols in the Rayleigh fading channels. New lower bound of outage probability and approximate expression of bit error rate (BER) for three-phase two-way relaying (3P-TWR) protocol are derived in closed-form. These expressions are valid for arbitrary signal-to-noise ratio values, numbers of co-channel interferers and amajority of modulation formats employed in the practical system. Then a comparative study is developed for the performance of three two-way transmission protocols, i.e., direct transmission (DT) protocol, two-phase two-way relaying (2P-TWR) protocol and 3P-TWR protocol based on the asymptotic expressions of outage probability and BER. On the basis of the theoretical results, the thresholds on the strength (variance) of direct channel and target rate for the relative performance of different protocols are obtained and the effect of interferences at the terminal and relay on the relative performance is analyzed. The results present key insights on how to choose proper two-way transmission protocol with the knowledge of fading channels, required date rate and modulation format to optimize the system performance in the practical interference-limited scenarios. Simulation results are presented to validate the theoretical analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.380-383
• /
• 2006

This study examines the influence factor of flanking transmission in the wall. Generally, there is the difference of airborne sound isolation between laboratory and field test. The purpose of this study is examing the cause of droping sound insulation performance in the field and searching the method of improving sound insulation performance. First, we measured the sound isolation in the wall at the lab. Then, we measured it in the field and compared them. At the base of these datum, we measured the flanking transmission and solid transmission. For the flanking transmission am the wall, we used intensive method. So, we found the influence of solid transmission.

• International journal of advanced smart convergence
• /
• 제9권3호
• /
• pp.118-126
• /
• 2020

In this paper, we present an effective single image fog removal by using the Joint Bright and Dark Channel (JBDC) and pixel-based transmission estimation to enhance the visibility of outdoor images susceptible to degradation due to weather and environmental conditions. The conventional methods include refinement process of coarse transmission with heavy computational complexity. The proposed transmission estimation reveals excellent edge-preserving performance and does not require the refinement process. We estimate the atmospheric light in pixel-based fashion, which can improve the transmission estimation performance and visual quality of the restored image. Moreover, we propose an adaptive transmission estimation to enhance the visual quality specifically in sky regions. Comprehensive experiments on various fog images show that the proposed method exhibits reduced computational complexity and excellent fog removal performance, compared with the existing methods; thus, it can be applied to various fields including real-time devices.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권7호
• /
• pp.406-411
• /
• 2000

This paper presents the results of performance confirmation tests for domestic 20 [Ton] transmission suspension insulators which will be widely utilized in transmission lines. The new test methods such as power arc test, steep-front-of-wave flashover voltage test, and etc. which have been only utilized for the distribution insulators were applied in transmission suspension insulators. The properties of metal and cement used in the 20 [Ton] transmission insulators were also evaluated by the various analysis techniques. Based on the results, we evaluated the performance of the transmission suspension insulators.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.189-191
• /
• 2001

This paper describes a proposal for performance criteria for transmission system planning performance criteria of transmission system is expected to be a guideline for investment into transmission network.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.212-223
• /
• 1995

To improve the efficiency of a power transmission system with slip elements, power split/circulation system is applied. The performance of a power split/circulation system varies widely by the change of the followings; the layout of system, the type and gear ratio of planetary gear, the performance of slip element, etc. Therefore, when one designs such a power transmission system or when one determines the economic/power mode of system, a certain performance prediction method is needed. In this study, the internal power flow pattern of a power split/circulation system is theoretically analyzed on several transmission systems. And an effective performance prediction method(so called performance locus diagram) is presented. By this method, the effects of design factors can be easily understood and the qualitative performances of system can be clearly evaluated.