• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.599-604
• /
• 2004

Implantable flexible sensor using polymer/metal multilayer processing technique for telemetrical real-time blood pressure monitoring is presented. The realized sensor is mechanically flexible, which can be less invasively implanted and attached on the outside of blood vessel to monitor the variation of blood pressure. Therefore, unlike conventional detecting methods which install sensor on the inside of vessel, the suggested monitoring method can monitor the relative blood pressure without injuring blood vessel. The major factor of sudden death of adults is a disease of artery like angina pectoris and myocardial infarction. A disease of circulatory system resulted from vessel occlusion by plaque can be preventable and treatable early through continuous blood pressure monitoring. The procedure of suggested new method for monitoring variation of blood pressure is as follows. First, integrated sensor is attached to the outer wall of blood vessel. Second, it detects mechanical contraction and expansion of blood vessel. And then, reader antenna recognizes it using telemetrical method as the relative variation of blood pressure. There are not any active devices in the sensor system; therefore, the transmission of energy and signal depends on the principle of mutual inductance between internal antenna of LC resonator and external antenna of reader. To confirm the feasibility of the sensing mechanism, in vitro experiment using silicone rubber tubing and blood is practiced. First of all, pressure is applied to the silicone tubing which is filled by blood. Then the shift of resonant frequency with the change of applied pressure is measured. The frequency of 2.4 MHz is varied while the applied pressure is changed from 0 to 213.3 kPa. Therefore, the sensitivity of implantable blood pressure is 11.25 kHz/kPa.

• Journal of Legislation Research
• /
• no.44
• /
• pp.33-62
• /
• 2013

In this paper, the consolidation of ICT basic legislation and ICT special legislation concerning "Ministry of Science, ICT and Future Planning" and "Korea Communications Commission" which came on the back of governmental reorganization in recent years is discussed in the theoretical and practical aspect. Development of "data communication technology" innovatively changed the method of livelihood of mankind, the emergence of network under global dimension provided financial social benefit and posed a challenge and a threat at the same time. Form digital revolution human kind can expect to receive many important blessings. Nevertheless, there are many advantages of development of technology by digital revolution, cyberspace like online media, internet etc. has realistically many problems that must be solved. To maximum positive aspects like the expansion of freedom of expression and creating plan of economy by the advance of transmission technology is needed. And to minimize side effects of informatization is required more. The First, Special Act on ICT has an adaptation in normative standardization to be fit in media convergence beyond convergence of broadcasting and telecommunications. Henceforth, there must be established a legal basis for the achievement of protection of economic evolution and freedom of speech in digital media, information, communication technology and content development. The second, the government action is to accomplish economic development and freedom of information in structural aspect of norm. Therefore minimizing normative problem by reorganization of organization remains clearly unresolved in politics. The third, Special Act on ICT must be basic law covering info-communications field, pay telecommunication and media contents field. The forth, from a technical point of view, net neutrality, conflict of interest for digital content and so on can be fixed easily. Special Act on ICT must not only pursuit of development of industry. Special Act on ICT and pursuit of enhancing quality of life of people and preparing program to promote democratization. From now on, we need to make powerful nation of information& communications technology and in information human rights protection field got to be one step ahead of others with reference to appear all the various aspects must be brought together in the discussion of legislation process of Special Act on ICT.

• The Southeast Asian review
• /
• v.20 no.3
• /
• pp.263-297
• /
• 2010

The relics of the Southeast Asian civilizations in the first phase are found with the relics from India, China, and even further West of Persia and Rome. These relics are the historic marks of the ancient interactions of various continents, mainly through the maritime trade. The traces of the indic culture, which appears in the historic age, are represented in the textual records and arts, regarded as the essence of the India itself. The ancient Hindu arts found in various locations of Southeast Asia were thought to be transplanted directly from India. However, Neither did the Gupta Hindu Art of India form the mainstream of the Gupta Art, nor did it play an influential role in the adjacent areas. The Indian culture was transmitted to Southeast Asia rather intermittently than consistently. If we thoroughly compare the early Hindu art of India and that of Southeast Asia, we can find that the latter was influenced by the former, but still sustained Southeast Asian originality. The reason that the earliest Southeast Asian Hindu art is discovered mostly in continental Southeast Asia is resulted from the fact that the earliest networks between India and the region were constructed in this region. Among the images of Hindu gods produced before the 7th century are Shiva, Vishnu, Harihara, and Skanda(the son of Shiva), and Ganesha(the god of wealth). The earliest example of Vishnu was sculpted according to the Kushan style. After that, most of the sculptures came to have robust figures and graceful proportions. There are a small number of images of Ganesha and Skanda. These images strictly follow the iconography of the Indian sculpture. This shows that Southeast Asians chose their own Hindu gods from the Hindu pantheon selectively and devoted their faiths to them. Their basic iconography obediently followed the Indian model, but they tried to transform parts of the images within the Southeast Asian contexts. However, it is very difficult to understand the process of the development of the Hindu faith and its contents in the ancient Southeast Asia. It is because there are very few undamaged Hindu temples left in Southeast Asia. It is also difficult to make sure that the Hindu religion of India, which was based on the complex rituals and the caste system, was transplanted to Southeast Asia, because there were no such strong basis of social structure and religion in the region. "Indianization" is an organized expansion of the Indian culture based on the sense of belonging to an Indian context. This can be defined through the process of transmission and progress of the Hindu or Buddhist religions, legends about purana, and the influx of various epic expression and its development. Such conditions are represented through the Sanskrit language and the art. It is the element of the Indian culture to fabricate an image of god as a devotional object. However, if we look into details of the iconography, style, and religious culture, these can be understood as a "selective reception of foreign religious culture." There were no sophisticated social structure yet to support the Indian culture to continue in Southeast Asia around the 7th century. Whether this phenomena was an "Indianization" or the "influx of elements of Indian culture," it was closely related to the matter of 'localization.' The regional character of each local region in Southeast Asia is partially shown after the 8th century. However it is not clear whether this culture was settled in each region as its dominant culture. The localization of the Indian culture in Southeast Asia which acted as a network connecting ports or cities was a part of the process of localization of Indian culture in pan-Southeast Asian region, and the process of the building of the basis for establishing an identity for each Southeast Asian region.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.53-65
• /
• 2022

According to the advancement of the GNSS satellite positioning system, the module of hardware and operation software reflecting accuracy and economical efficiency is implemented in the user sector including the multi-channel GNSS receiver, the multi-frequency external antenna and the mobile app (App) base public positioning analysis software etc., and the multichannel GNSS RTK positioning of the active configuration method (DIY, Do it yourself) is possible according to the purpose of user. Especially, as the infrastructure of multi-GNSS satellite is expanded and the potential of expansion of utilization according to various modules is highlighted, interest in the utilization of multi-channel low-cost GNSS receiver module is gradually increasing. The purpose of this study is to review the multi-channel low-cost GNSS receivers that are appearing in the mass market in various forms and to analyze the utilization plan of the "address information facility investigation project" of the Ministry of Public Administration and Security by constructing the multi-channel low-cost GNSS positioning module based RTK survey system (hereinafter referred to as "multi-channel GNSS RTK module positioning system"). For this purpose, we constructed a low-cost "multi-channel GNSS RTK module positioning system" by combining related modules such as U-blox's F9P chipset, antenna, Ntrip transmission of GNSS observation data and RTK positioning analysis app through smartphone. Kinematic positioning was performed for circular trajectories, and static positioning was performed for address information facilities. The results of comparative analysis with the Static positioning performance of the geodetic receivers were obtained with 5 fixed points in the experimental site, and the good static surveying performance was obtained with the standard deviation of average ±1.2cm. In addition, the results of the test point for the outline of the circular structure in the orthogonal image composed of the drone image analysis and the Kinematic positioning trajectory of the low cost RTK GNSS receiver showed that the trajectory was very close to the standard deviation of average ±2.5cm. Especially, as a result of applying it to address information facilities, it was possible to verify the utility of spatial information construction at low cost compared to expensive commercial geodetic receivers, so it is expected that various utilization of "multi-channel GNSS RTK module positioning system"