• Journal of The Korean Astronomical Society
• /
• v.12 no.1
• /
• pp.41-70
• /
• 1979

From $B\ddot{o}hm$-Vitense's atmospheric model calculations, the relations, [$T_e$, (B-V)] and [B.C, (B-V)] with respect to heavy element abundance were obtained. Using these relations and evolutionary model calculations of Rood, and Sweigart and Gross, analytic expressions for some physical parameters relating to the C-M diagrams of globular clusters were derived, and they were applied to 21 globular clusters with observed transition periods of RR Lyrae variables. More than 20 different parameters were examined for each globular cluster. The derived ranges of some basic parameters are as follows; $Y=0.21{\sim}0.33,\;Z=1.5{\times}10^{-4}{\sim}4.5{\times}10^{-3},\;age,\;t=9.5{\sim}19{\times}10^9$ years, mass for red giants, $m_{RG}=0.74m_{\odot}{\sim}0.91m_{\odot}$, mass for RR Lyrae stars, $m_{RR}=0.59m_{\odot}{\sim}0.75m_{\odot}$, the visual magnitude difference between the turnoff point and the horizontal branch (HB), ${\Delta}V_{to}=3.1{\sim}3.4(<{\Delta}V_{to}>=3.32)$, the color of the blue edge of RR Lyrae gap, $(B-V)_{BE}=0.17{\sim}0.21=(<(B-V)_{BE}>=0.18),\;[\frac{m}{L}]_{RR}=-1.7{\sim}-1.9$, mass difference of $m_{RR}$ relative to $m_{RG},(m_{RG}-m_{RR})/m_{RG}=0.0{\sim}0.39$. It was found that the ranges of derived parameters agree reasonably well with the observed ones and those estimated by others. Some important results obtained herein can be summarized as follows; (i) There are considerable variations in the initial helium abundance and in age of globular clusters. (ii) The radial gradient of heavy element abundance does exist for globular clusters as shown by Janes for field stars and open clusters. (iii) The helium abundance seems to have been increased with age by massive star evolution after a considerable amount (Y>0.2) of helium had been attained by the Big-Bang nucleosynthesis, but there is not seen a radial gradient of helium abundance. (iv) A considerable amount of heavy elements ($Z{\sim}10{-3}$) might have been formed in the inner halo ($r_{GC}$<10 kpc) from the earliest galactic co1lapse, and then the heavy element abundance has been slowly enriched towards the galactic center and disk, establishing the radial gradient of heavy element abundance. (v) The final galactic disk formation might have taken much longer by about a half of the galactic age than the halo formation, supporting a slow, inhomogeneous co1lapse model of Larson. (vi) Of the three principal parameters controlling the morphology of C-M diagrams, it was found that the first parameter is heavy clement abundance, the second age and the third helium abundance. (vii) The globular clusters can be divided into three different groups, AI, BI and CII according to Z, Y an d age as well as Dickens' HB types. BI group clusters of HB types 4 and 5 like M 3 and NGC 7006 are the oldest and have the lowest helium abundance of the three groups. And also they appear in the inner halo. On the other hand, the youngest AI clusters have the highest Z and Y, and appear in the innermost halo region and in the disk. (viii) From the result of the clean separations of the clusters into three groups, a three dimensional classification with three parameters, Z, Y and age is prsented. (ix) The anomalous C-M diagrams can be expalined in terms of the three principal parameters. That is, the anomaly of NGC 362 and NGC 7006 is accounted for by the smaller age of the order of $1{\sim}2{\times}10^9$ years rather than by the helium abundance difference, compared with M 3. (x) The difference in two Oosterhoff types I and II can be explained in terms of the mean mass difference of RR Lyrae variables rather than in terms of the helium abundance difference as suggested by Stobie. The mean mass of the variables in Oosterhoff type I clusters is smaller by $0.074m_{\odot}$ which is exactly consistent with Rood's estimate. Since it was found that the mean mass of RR Lyrae stars increases with decreasing Z, the two Oosterhoff types can be explained substantially by the metal abundance difference; the type II has Z<$3.4{\times}10^{-4}$, and the type I has higher Z than the type II.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.3
• /
• pp.319-326
• /
• 1996

The objective of this study was to investigate correlation between the morphology by microscopic assessments of surplus blastocysts produced in human IVF program and their cell number obtained by differential labelling method. For these experiments, 76 surplus human blastocysts were obtained from 36 patients on day 5 after IVF, the embryos were classified to early (ErB), early expanding (EEB), middle expanding (MEB), expanded blastocyst (EdB) according to their blastocoel expansion and zona thickness. When the ovum size and zona thickness of the classified blastocysts were measured using micrometer, although the embryos were produced in the same culture condition, there were significant variances in ovum size ($148.8 217.6{\mu}m$) and zona thickness ($1.2-14.4{\mu}m$). Total blastomere cell number counted after hoechst staining was increased by two to three fold during the transition period from ErB ($39.1{\pm}3.6$) to EdB ($(89.6{\pm}3.3)$) stage on day 5 after IVF. ICM ($11.9{\pm}1.8-22.2{\pm}4.3$) and TE ($24.5{\pm}3.6-70.0{\pm}7.7$) cell numbers using differential labelling were also showed the increased pattern according to the developmental level. Especially, EdB which showed poor ICM morphologically also indicated the low ICM cell number after differential labelling. This demonstrated that there is good correlation between the morphological assessment and the cell number. The count of ICM and TE nuclei using differential labelling can be used as an important criterion, if it is accompanied with morphological assessments, in selecting the better embryos for improving the pregnancy rates in human blastocyst transfer program.

• Korea journal of population studies
• /
• v.21 no.1
• /
• pp.184-228
• /
• 1998

This study reviews the relationship between son preference and fertility behavior, and infant and chlid mortality in the context of fertility and mortality decline. In Korea the situation reveals that fertility can decline to a very low level even in the presence of strong son preference, but son preference has certain effects on fertility and childhood mortality. The effect of son preference on fertility increased as the level of fertility declined. Our findings show that son preference causes excess female childhood mortality both directly and indirectly through fertility. Also, in Korea, the analysis reveals that female children suffer excessively high level of mortality and part of the excess mortality is due to parents' behavior on family building related to the effort to secure the birth of a son.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.2
• /
• pp.58-68
• /
• 2017

The conclusion of this research after analyzing and interpreting the landscape structure and meaning of Yeongsajeongpalkyung (永思亭八景) that appears in Yeongsajeongpalyeongsi(永思亭八詠詩) of Cheonggye(靑溪) Yang, Dae-bak(梁大樸, 1544~1592) and through document studies, poetry and painting analysis and interpretation, and site investigation, is as follows. Yeongsajeong and its nearby lands are the area of "Yeongsa", where the builder, Ahn, Jeon(安?, 1518~1571) worshipped towards the grave of ancestors, and Yeongsajeongpalkyung oversees a family burial ground in Namwon, centering around Yeongsajeong such as Yocheon, Geumseokgyo and Cheonggyedong, and Sunjagang River and Mountain Jiri, which are the foot hold and key points of advantageous scenic views in Namwon. Yeongsajeongpalkyung, unlike general Jeongjapalkyung, shows a panoramic bird's-eye structure overseeing the landscape and scenery of the Yocheon area and Sunjagang River, in addition to Yeongsajeong, while show in a transition of location, a multi-view structure and time. The trace of visual unity with Sosangpalkyung of China can be seen in many places in Yeongsajeongpalkyung, which seems to be a transitional feature of composing poems regarding Palgyeong during the mid-Joseon dynasty, which pursues harmony with the local landscape of the Namwon area. The 'Changsongchwijuk(蒼松翠竹)' appearing in each of the first and second scenic views of Palgyeong and Yeongsajeongpalyeong can be understood as an incarnation of Yang, Dae-bak, the author of Palyeongsi or Ahn, Jeon, the builder of Yeongsajeong. On the other hand, as a result of interpreting the yin-yang features of poetic diction and picture elements appearing in the subtitle of Yeongsajeongpalyeong, Palyeongsi seems mostly full of yin-like elements and Palgyeongdo. Moreover, as a result of comparing and analyzing the acts expressed in and acts described in Yeongsajeongpalyeong, based on the fact that the reis almost no common ground between the two media except for Soongangmowoo, the third scenic view, the formal similarity between the two media can be acknowledged, however, it is difficult to discover any substantive 'integrity of poetry and painting'.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.239-240
• /
• 2008

As semiconductor devices are scaled down for better performance and more functionality, the Cu-based interconnects suffer from the increase of the resistivity of the Cu wires. The resistivity increase, which is attributed to the electron scattering from grain boundaries and interfaces, needs to be addressed in order to further scale down semiconductor devices [1]. The increase in the resistivity of the interconnect can be alleviated by increasing the grain size of electroplating (EP)-Cu or by modifying the Cu surface [1]. Another possible solution is to maximize the portion of the EP-Cu volume in the vias or damascene structures with the conformal diffusion barrier and seed layer by optimizing their deposition processes during Cu interconnect fabrication, which are currently ionized physical vapor deposition (IPVD)-based Ta/TaN bilayer and IPVD-Cu, respectively. The use of in-situ etching, during IPVD of the barrier or the seed layer, has been effective in enlarging the trench volume where the Cu is filled, resulting in improved reliability and performance of the Cu-based interconnect. However, the application of IPVD technology is expected to be limited eventually because of poor sidewall step coverage and the narrow top part of the damascene structures. Recently, Ru has been suggested as a diffusion barrier that is compatible with the direct plating of Cu [2-3]. A single-layer diffusion barrier for the direct plating of Cu is desirable to optimize the resistance of the Cu interconnects because it eliminates the Cu-seed layer. However, previous studies have shown that the Ru by itself is not a suitable diffusion barrier for Cu metallization [4-6]. Thus, the diffusion barrier performance of the Ru film should be improved in order for it to be successfully incorporated as a seed layer/barrier layer for the direct plating of Cu. The improvement of its barrier performance, by modifying the Ru microstructure from columnar to amorphous (by incorporating the N into Ru during PVD), has been previously reported [7]. Another approach for improving the barrier performance of the Ru film is to use Ru as a just seed layer and combine it with superior materials to function as a diffusion barrier against the Cu. A RulTaN bilayer prepared by PVD has recently been suggested as a seed layer/diffusion barrier for Cu. This bilayer was stable between the Cu and Si after annealing at $700^{\circ}C$ for I min [8]. Although these reports dealt with the possible applications of Ru for Cu metallization, cases where the Ru film was prepared by atomic layer deposition (ALD) have not been identified. These are important because of ALD's excellent conformality. In this study, a bilayer diffusion barrier of Ru/TaCN prepared by ALD was investigated. As the addition of the third element into the transition metal nitride disrupts the crystal lattice and leads to the formation of a stable ternary amorphous material, as indicated by Nicolet [9], ALD-TaCN is expected to improve the diffusion barrier performance of the ALD-Ru against Cu. Ru was deposited by a sequential supply of bis(ethylcyclopentadienyl)ruthenium [Ru$(EtCp)_2$] and $NH_3$plasma and TaCN by a sequential supply of $(NEt_2)_3Ta=Nbu^t$ (tert-butylimido-trisdiethylamido-tantalum, TBTDET) and $H_2$ plasma. Sheet resistance measurements, X-ray diffractometry (XRD), and Auger electron spectroscopy (AES) analysis showed that the bilayer diffusion barriers of ALD-Ru (12 nm)/ALD-TaCN (2 nm) and ALD-Ru (4nm)/ALD-TaCN (2 nm) prevented the Cu diffusion up to annealing temperatures of 600 and $550^{\circ}C$ for 30 min, respectively. This is found to be due to the excellent diffusion barrier performance of the ALD-TaCN film against the Cu, due to it having an amorphous structure. A 5-nm-thick ALD-TaCN film was even stable up to annealing at $650^{\circ}C$ between Cu and Si. Transmission electron microscopy (TEM) investigation combined with energy dispersive spectroscopy (EDS) analysis revealed that the ALD-Ru/ALD-TaCN diffusion barrier failed by the Cu diffusion through the bilayer into the Si substrate. This is due to the ALD-TaCN interlayer preventing the interfacial reaction between the Ru and Si.

• Sijohaknonchong
• /
• v.42
• /
• pp.151-185
• /
• 2015

The purpose of this study is to reveal the aspects of "Children" in Saseolsijo and its historical implication in Korean Classical Poetry. What was discussed can be summarized as follows: There are two types of children in Saseolsijo, one is silent, and the other is speaking. The silent child characteristics are such as being called and addressed by the poetic narrator, customary audience, passive attitude, etc. The speaking child characteristics are speaking subject, active attitude as sign of modernity. These phenomenon simply expose the differences of aesthetic order. The silent children is mainly to be utilized as a device to maximize the lyricism of the text as an ideologically product by the inner request of the poetic narrator and show identification discourse. The speaking child, gives the dynamics in text by heterogeneous discourse and informs aesthetic distance between "the reader and the text" as well and show distance discourse. These fragments from Saseolsijo's children are also found in previous genres. In the case of Hyangga, 'children' speak for solving others' desire but are targeted by poetic narrator as well. In the case of Goryosokyo, 'children' show activity and efforts to break forced silence by the poetic narrator through voluntary speaking. In Sijo's case, unlike other genres, some literary works show contents about disciplining children and the growth of children. However mostly targeted children by the poetic narrator are predominantly appeared from the discourse perspective. These aspects of children in previous genres including some of works in Saseolsijo are mainly associated with the appearance of medieval children. Unlike these, the new aspects of Saseolsijo's children show the cross-section of the signs of transition contemporary, from medieval to modern. Even if there are few literary works in these, speaking children with activity reveals novelty over medieval-imposed 'child-ness' by showing 'self', 'individual desire' strongly. This novelty is far from infants of the modern concept as naive and innocent children but these children are noted in that they show a part of modernity through various voices in the text, the comic(laughter), multiple point views, etc.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.75-82
• /
• 2019

Flexible solar cells have attracted enormous attention in recent years due to their wide applications such as portable batteries, wearable devices, robotics, drones, and airplanes. In particular, the demands of the flexible silicon and compound semiconductor solar cells with high efficiency and high reliability keep increasing. In this study, we fabricated a flexible InGaP/GaAs double-junction solar module. Then, the effects of the wind speed and ambient temperature on the operating temperature of the solar cell were analyzed with the numerical simulation. The temperature distributions of the solar modules were analyzed for three different wind speeds of 0 m/s, 2.5 m/s, and 5 m/s, and two different ambient temperature conditions of 25℃ and 33℃. The flexibility of the flexible solar module was also evaluated with the bending tests and numerical bending simulation. When the wind speed was 0 m/s at 25 ℃, the maximum temperature of the solar cell was reached to be 149.7℃. When the wind speed was increased to 2.5 m/s, the temperature of the solar cell was reduced to 66.2℃. In case of the wind speed of 5 m/s, the temperature of the solar cell dropped sharply to 48.3℃. Ambient temperature also influenced the operating temperature of the solar cell. When the ambient temperature increased to 33℃ at 2.5 m/s, the temperature of the solar cell slightly increased to 74.2℃ indicating that the most important parameter affecting the temperature of the solar cell was heat dissipation due to wind speed. Since the maximum temperatures of the solar cell are lower than the glass transition temperatures of the materials used, the chances of thermal deformation and degradation of the module will be very low. The flexible solar module can be bent to a bending radius of 7 mm showing relatively good bending capability. Neutral plane analysis was also indicated that the flexibility of the solar module can be further improved by locating the solar cell in the neutral plane.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.625-628
• /
• 2015

POLARBEAR is a ground-based experiment located in the Atacama desert of northern Chile. The experiment is designed to measure the Cosmic Microwave Background B-mode polarization at several arcminute resolution. The CMB B-mode polarization on degree angular scales is a unique signature of primordial gravitational waves from cosmic inflation and B-mode signal on sub-degree scales is induced by the gravitational lensing from large-scale structure. Science observations began in early 2012 with an array of 1.274 polarization sensitive antenna-couple Transition Edge Sensor (TES) bolometers at 150 GHz. We published the first CMB-only measurement of the B-mode polarization on sub-degree scales induced by gravitational lensing in December 2013 followed by the first measurement of the B-mode power spectrum on those scales in March 2014. In this proceedings, we review the physics of CMB B-modes and then describe the Polarbear experiment, observations, and recent results.

• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.9-26
• /
• 1999

The Ulleung Basin (Tsushima Basin) in the southwestern East Sea (Japan Sea) is floored by a crust whose affinity is not known whether oceanic or thinned continental. This ambiguity resulted in unconstrained mechanisms of basin evolution. The present work attempts to define the nature of the crust of the Ulleung Basin and its tectonic evolution using seismic wide-angle reflection and refraction data recorded on ocean bottom seismometers (OBSs). Although the thickness of (10 km) of the crust is greater than typical oceanic crust, tau-p analysis of OBS data and forward modeling by 2-D ray tracing suggest that it is oceanic in character: (1) the crust consists of laterally consistent upper and lower layers that are typical of oceanic layers 2 and 3 in seismic velocity and gradient distribution and (2) layer 2C, the transition between layer 2 and layer 3 in oceanic crust, is manifested by a continuous velocity increase from 5.7 to 6.3 km/s over the thickness interval of about 1 km between the upper and lower layers. Therefore it is not likely that the Ulleung Basin was formed by the crustal extension of the southwestern Japan Arc where crustal structure is typically continental. Instead, the thickness of the crust and its velocity structure suggest that the Ulleung Basin was formed by seafloor spreading in a region of hotter than normal mantle surrounding a distant mantle plume, not directly above the core of the plume. It seems that the mantle plume was located in northeast China. This suggestion is consistent with geochemical data that indicate the influence of a mantle plume on the production of volcanic rocks in and around the Ulleung Basin. Thus we propose that the opening models of the southwestern East Sea should incorporate seafloor spreading and the influence of a mantle plume rather than the extension of the crust of the Japan Arc.

• Journal of Korea Water Resources Association
• /
• v.39 no.5 s.166
• /
• pp.453-466
• /
• 2006

The objective of this study was to analyze the changes in the hydrological environment in Soyanggang-dam watershed due to climate change results (in yews 2050 and 2100) which were simulated using CCCma CGCM2 based on SRES A2 and B2. The SRES A2 and B2 were used to estimate NDVI values for selected land use using the relation of NDVI-Temperature using linear regression of observed data (in years 1998$\sim$2002). Land use change based on SRES A2 and B2 was estimated every 5- and 10-year period using the CA-Markov technique based on the 1985, 1990, 1995 and 2000 land cover map classified by Landsat TM satellite images. As a result, the trend in land use change in each land class was reflected. When land use changes in years 2050 and 2100 were simulated using the CA-Markov method, the forest class area declined while the urban, bareground and grassland classes increased. When simulation was done further for future scenarios, the transition change converged and no increasing trend was reflected. The impact assessment of evapotranspiration was conducted by comparing the observed data with the computed results based on three cases supposition scenarios of meteorological data (temperature, global radiation and wind speed) using the FAO Penman-Monteith method. The results showed that the runoff was reduced by about 50% compared with the present hydrologic condition when each SRES and periods were compared. If there was no land use change, the runoff would decline further to about 3$\sim$5%.