• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.12-12
• /
• 2002

Lanthanum manganites have been extensively studied for the application to magnetic devices since the colossal magnetoresistance of these compounds has been observed [1]. The critical temperatures, Tc, of manganites La/sub 0.7/Ca/sub 0.3-x/Ba/sub x/MnO₃ increased as the content of Ba increased except the abrupt jump near the critical concentration. The step like behavior of the critical temperature for a similar compound has been known to be related to the structural phase transition [2]. To understand the step like behavior of Tc, the EXAFS technique is applied to the La/sub 0.7/Ca/sub 0.3-x/Ba/sub x/MnO₃ compound system. The ordering between the manganese and oxygen was examined by this method. The EXAFS analysis shows that the coordination numbers were not changed before and after the phase transition, the bonding distance between manganese and oxygen is about 1.94 ± 0.02 Å, which is consistent with other work [3] and the Debye waller parameters were about σ²= 0.0037 ± 0.0005 Ų for x=0.0 and x=3.0, respectively. The value of Debye-Waller parameter for x=0.09 is about σ² = 0.0050 ± 0.0005 Ų in about phase transition concentration. Based on the Debye-Waller parameters, it is shown that the ordering between manganese and oxygen is significantly reduced near the phase transition concentration.

• Advanced Composite Materials
• /
• 제17권1호
• /
• pp.89-99
• /
• 2008

Using a Dynamic Mechanical Analyzer (DMA), mechanical properties like modulus and phase transition temperature of polyester composites of banana fibers (treated and untreated) are measured simultaneously. The shifting of phase transition temperature is observed in some treatments. The performance of the composite depends to a large extent on the adhesion between polymer matrix and the reinforcement. This is often achieved by surface modification of the matrix or the filler. Banana fiber was modified chemically to achieve improved interfacial interaction between the fiber and the polyester matrix. Various silanes and alkalies were used to modify the fiber surface. Chemical modification was found to have a profound effect on the fiber/matrix interaction, which is evident from the values of phase transition temperatures. Of the various chemical treatments, simple alkali treatment with 1% NaOH was found to be the most effective.

• Archives of Pharmacal Research
• /
• 제9권2호
• /
• pp.75-79
• /
• 1986

The effect of phenothiazine derivatives on the thermotropic transition of liposomal lipid bilayer made of dipalmitoyl phosphatidylchline and dipalmitoyl phosphatidic acid was investigated with differential scanning calorimetry. The thermograms of the liposomal bilayer incorporated with levomepromazine, chlopromazine, prochloperazine, perphenazine and fluphenazine were obtained and the size of cooperative unit of the transition were calculated from the ratio of the van't Hoff enthalpy change to the calculated enthalpy change of the transition. The results showed that incorporation of phenothiazine derivatives into the liposomal bilayer reduced the transition temperature at which the transition from solid state to liquid-crystalline state occurs, and broadened the thermogram peaks. Phenothiazine derivatives also significantly reduced the size of cooperative unit of the transition. The effect of the drugs was proportional to the concentration of the drug in the bilayer. This means that phenothiazine derivatives might have significant fluidizing effects on the biomembrane. The sizes of cooperative unit were successfully corrlated with phar-macological activities of the drugs and the surface pressure increases of lipid monolayer by these drugs. These correlations might be ascribed to a possible hydrophobic nature of interaction between the biomembrane and the drugs involved in their pharmacology.

• 한국IT서비스학회지
• /
• 제14권2호
• /
• pp.87-109
• /
• 2015

The IT outsourcing industry has been widespread for decades since the growth of the system integration industry stagnates and companies need to curtail expenses and improve the quality of IT services. According to previous studies on the success factors of the IT outsourcing, its transition phase is significant because of continuity of business and the handover of knowledge. Since a transition phase consists of several projects, but its goal is different from general projects, it needs special and professional management. Therefore, recent IT outsourcing business starts to introduce PMO (project management offices), of which success strongly depends on the competencies of the PMO. However, there are only few studies on which competencies of the PMO are important. In this paper, we suggest an evaluation model of transition PMO competencies derived using the repertory grid technique and the analytic hierarchy process. Additionally, we compare the differences between the views of several stakeholders on the importance of the competencies.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.29.2-29.2
• /
• 2011

Earth's bow shock is a transition layer across which properties of plasmas change irreversibly. Although some features of the bow shock are well described by continuities of fluxes of various macroscopic quantities, particle dynamics across the transition layer is very complicated. Observed phase space distributions show multiple ion beams and partially thermalized ions around the transition layer. In some cases, both hot magnetosheath ions and cold solar wind ions simultaneously exist in the magnetosheath. Electrons around the transition layer usually have flat-top distributions with temperature anisotropy. From the observed properties of the phase space distributions we will discuss thermalization processes that occur across the shock transition.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.405-411
• /
• 2013

The structural, magnetic and magnetocaloric properties of $CoMn_{1-x}Cr_xGe$ (x=0.05-0.125) have been investigated by using electron microscopy, x-ray diffraction, calorimetric and magnetic measurements. In this study, our aim is to justify the magnetocaloric effect by tuning the structural and magnetic transition temperature with Cr doping on CoMnGe pure system. The substitution of Cr for Mn leads to a decrease of both structural and magnetic transition temperatures. However, structural and magnetic transition temperatures do not close to each other. From magnetization measurement, we calculate that isothermal entropy change associated with magnetic transition can be as high as 3.82 J $kg^{-1}K^{-1}$ at 302 K in a field of 7 T. Meanwhile, structural phase transition contribution to isothermal entropy change is calculated as 5.85 J $kg^{-1}K^{-1}$ at 322 K for 7 T.

• Journal of Korean Vacuum Science & Technology
• /
• 제7권1호
• /
• pp.13-17
• /
• 2003

The influence of structural transition on the resistance and impedance behavior of Ni$_2$MnGa alloy was investigated. The temperature-dependent resistance and impedance were measured in a temperature range of 4 - 350 K and 185 - 300 K, respectively. The dependence of temperature coefficient of resistivity on temperature shows a kink at 220 K, which is related to the structural transition. The change in dominant scattering mechanism results in the observed kink. Significant increases were also observed around the transition temperature for both real and imaginary parts of impedance. It is thought that this phenomenon originates from disappearance of the martensite twin boundaries during the structural transformation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.169.2-169.2
• /
• 2015

$VO_2$ is a well-known a metal-to-insulator-transition (MIT) material, accompanied with a first order structural phase transition near room temperature. Because of the structural phase transition and the MIT occur near a same temperature, there is an ongoing argument whether the MIT is induced by the structural phase transition. $VO_2$ exhibits a relatively weak anti-oxidization ability and can be oxidized to higher-valence oxides (e.g., $V_4$ $O_7$ or $V_2$ $O_5$) when annealed at a high temperature in an oxygen-rich atmosphere. We fabricated $VO_2$ films on $Al_2$ $O_3$ (0001) substrates using a DC magnetron sputtering deposition process with carefully control the $O_2$ percentage in an atmosphere. X-ray diffraction measurements from the films showed only (0l0) peaks with no extra peaks, indicating b-oriented films. The temperature-dependent local structural properties of $VO_2$ films were investigated by using in-situ X-ray absorption fine structure (XAFS) measurements at the V K edge. XAFS revealed that the structural phase transition was occurred nearly $70^{\circ}C$ for heating process and reproducible. Resistance measurements as a function of temperature (R-T) demonstrated that the resistance of $VO_2$ films was changed by a factor of 4 near $75^{\circ}C$ which was higher than $68^{\circ}C$ reported from a $VO_2$ bulk. We will discuss the MIT of $VO_2$ films, comparing with the local structural properties determined by XAFS measurements.

• 대한화학회지
• /
• 제36권3호
• /
• pp.360-365
• /
• 1992

고체 시료의 상전이 현상을 연구하기 위하여 온도 가변용 광음향 cell과 dewar를 제작하였고, 이 장치를 이용하여 wood's metal의 상전이 온도를 측정하였다. 실험 결과는 융점으로 알려진 343 K와 잘 일치하고, 잠열(latent heat)이 존재하는 1차 상전이임을 나타냈으며 supercooling 현상이 존재한다는 것을 알았다. 고체-액체 상전이와 같은 1차 상전이의 경우 잠열이 존재하며 이러한 잠열은 시료의 온도를 올리며 측정할 경우 상전이 온도 부근에서 광음향 신호의 급작스런 감소를 발생시킨다. 그러나 온도를 내릴 경우 광음향 신호에는 아무런 영향을 미치지 못하므로 광음향 측정은 상전이의 차수를 결정할 수도 있음을 물론, 고체의 상전이 현상 연구에 유용한 방법임을 입증하였다.

• 한국재료학회지
• /
• 제5권7호
• /
• pp.820-828
• /
• 1995

초청정 Si 기판위에 Ti을 증착하여 형성시킨 Ti-silicide의 상전이와 각상의 표면 및 계면형상을 Ti 증착두께, 열처리 온도, 기판의 방위에 따라 조사하였다. 초 고진공 챔버에서 각각 400$\AA$ 및 200$\AA$의 Ti를 50$0^{\circ}C$부터 90$0^{\circ}C$까지 10$0^{\circ}C$간격으로 가열되어 있는 Si(100) 및 Si(111) 기판에 증착하여 Ti-silicide를 형성하였다. 형성된 Ti-silicide를 XRD, SEM, TEM으로 상전이와 각상의 표면 및 계면 형상을 관찰하였다. 관찰결과 C49에서 C54상으로의 상전이 온도는 $650^{\circ}C$정도이었고, 기판의 방위와 박막의 증착 두께에 따라 상전이 온도의 변화가 관찰되었으며, 이 상전이 온도의 변화를 표면에너지와 체적에너지에 기초를 둔 고찰을 통해 설명하였다. 그리고 C49상은 증착한 박막에서의 Si 원자의 비균질한 확산 특성으로 인해 거친 계면을 나타내고 있으나, C54상은 비교적 균질한 계면을 나타내고 있으며 응집화에 의해 island가 형성된 것이 관찰되었다.