• 에너지공학
• /
• 제23권3호
• /
• pp.27-35
• /
• 2014

본 연구에서는 기존에 알려진 수직 원형관내 혼합대류 유동영역지도에 대하여 원 문헌의 분석과 재구성을 통해 지도의 유효성 검토를 수행하였다. 지도를 구성하는 원 문헌을 수집하여 내용을 정리하였고 조사한 데이터와 대류열전달 상관식을 활용하여 독립적으로 지도를 재구성하고 기존의 지도와 비교하였다. 재구성한 지도에는 혼합대류 영역이 곡선이 아니라 직선으로 나타났으며 천이영역을 나타내는 것은 재현되지 않았다. 일부 데이터만 포함된 기존의 지도와 달리 재구성 지도에는 상당히 많은 양의 데이터가 포함됐다. 기존의 유동영역지도는 활용된 데이터가 선택적으로 사용되었고, 혼합대류와 천이영역을 나타내는 실선 대해 언급되지 않았으며 불확실도 분석을 통한 정보를 제공하지 않았기 때문에 신뢰할 수 없다고 판단된다. Metais와 Eckert의 연구 이후, 혼합대류에 관한 많은 연구가 수행되었으나 대류의 유동영역을 구분하는 방법으로 기존의 지도가 지금까지 활용되고 있다.

• 한국대기환경학회지
• /
• 제27권6호
• /
• pp.681-691
• /
• 2011

The size distributions of smoke particles from fire are prerequisite for the studies on fire detection and adverse health effects. Above the flame of the fire, coagulation dominates and the smoke particles grow from 1 to 50 nm up to 100 to 3,000 nm, sizes ranging from the free-molecular regime to the continuum regime. The characteristics of the agglomeration of the smoke particles are well known, independently for each of the free-molecular and continuum regimes. However, there are not many systematic studies in the entire regime by the complexity of the mechanisms. The purpose of this work is to find the characteristics of the development of the size distribution of smoke particles by agglomeration in the entire size range covering the free-molecular regime, via transition regime, to the near-continuum and continuum regime for each variation of parameters such as fractal dimension, primary particle size and dimensionless coagulation time. In this work, the dynamic equation for the discrete-size spectrum of the particles was solved using a nodal method based on the modification of a sectional method. In the calculation, the collision frequency function for the entire regime, which is derived by using the concept of collision volume and general enhancement function, was applied. The self-preserving size distribution for the entire regime is compared with the ones for the free-molecular or continuum regimes for each variation of the parameters.

• Wind and Structures
• /
• 제12권6호
• /
• pp.541-551
• /
• 2009

This paper explains how to correctly measure the drag coefficient of a circular cylinder in wind tunnels with large blockage ratios and for the sub-critical to the super-critical flow regimes. When dealing with large blockage ratios, the drag has to be corrected for wall constraints. Different formulations for correcting blockage effect are compared for each flow regime based on drag measurements of smooth circular cylinders performed in a wind tunnel for three different blockage ratios. None of the correction model known in the literature is valid for all the flow regimes. To optimize the correction and reduce the scatter of the results, different correction models should be combined depending on the flow regime. In the sub-critical regime, the best results are obtained using Allen and Vincenti's formula or Maskell's theory with ${\varepsilon}$=0.96. In the super-critical regime, one should prefer using Glauert's formula with G=0.6 or the model of Modi and El-Sherbiny. The change in the formulations appears at the flow transition with a variation of the wake pattern when passing from sub-critical to super-critical flow regimes. This parameter being not considered in the known blockage corrections, these theories are not valid for all the flow regimes.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권2호
• /
• pp.382-392
• /
• 2004

The usage of constant velocity (CV) joint is effective for motorboats on gliding regime of the motion. During transition on the gliding when angle of the CV differs from null on driving and driven composite shafts there are moments of the second order. Excitation of oscillations of the second order moments occurs when driving shafts transmits a variable torque. which generates through CV joint a lateral moment acting on the bearing. As a result of oscillations from a resonating harmonic of a shafting the harmonic with the greater or periodically varying amplitude for power condition trough transferring to nominal power 144kW. Beating conditions coincide with third mode having frequency 45.486 Hz. In that case there is high increasing of the equivalent stresses. The forming of the stiffness of the composite material is concerned to use most orientation of the layer angle in the range of $\pm$60 degrees relatively of shaft axis. Application of that angles for layer orientation gives possibility to avoid high disturbance of the shafting for motorboat transition regime.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.631-636
• /
• 2000

The experimental study concerns the characteristics of a transitional flow in a concentric annulus with a diameter ration of 0.52, whose outer cylinder is stationary and inner one rotating. The pressure drops and skin-friction coefficients have been measured for the fully developed flow of water and that of glycerine-water solution (44%) at a inner cylinder rotational speed of $0{\sim}600$ rpm, respectively. The transitional flow have been examined by the measurement of pressure drops and the visualization of flow field, to reveal the relation of the Reynolds and Rossby numbers with the skin-friction coefficients and to understand the flow instability mechanism. The present results show that the skin-friction coefficients have the significant relation with the Rossby numbers, only for laminar regime. The occurrence of transition has been checked by the gradient changes of pressure drops and skin-friction coefficients with respect to the Reynolds numbers. The increasing rate of skin-friction coefficient due to the rotation is uniform for laminar flow regime, whereas it is suddenly reduced for transitional flow regime and, then, is gradually declined for turbulent flow regime. Consequently, the critical (axial-flow) Reynolds number decreases as the rotational speed increases. Thus, the rotation of inner cylinder promotes the early occurrence of transition due to the excitation of taylor vortices.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권1호
• /
• pp.833-840
• /
• 2021

This paper examines the effect of the interest rate set by Bank Indonesia on financial system stability as measured by the credit gap in Indonesia for quarterly data for the period 1976 Q1 to 2019 Q4. We suppose that the relationship between the Central Bank rate and the credit gap is non-linear. Hence, this study applies a smooth transition regression (STR) model to investigate the relationship between these variables. Our results are: first, by performing STR estimation we obtained a threshold level of Central Bank rate of 2.01. Second, a decrease in the Central Bank rate results in a reduction in the credit gap when the Central Bank rate is above or below the threshold level. The effect of the Central Bank rate is five times greater for the high regime than for the low regime. Third, we find evidence that the effect of the exchange rate, economic growth, inflation, and GDP per capita on the credit gap for the high regime is the opposite of the low regime. We suggest that policymakers need to keep the Central Bank interest rate low and stable so that the role of the bank as a financial intermediary remains stable and conducive to strengthening financial stability.

• 대한설비공학회지:설비저널
• /
• 제14권2호
• /
• pp.87-97
• /
• 1985

Experimental measurements of the heat flux to a upward impinging water jet on high heated test surface were obtained in the transition and film boiling regimes. Test variables were nozzle outlet velocity, subcooled water temperature and height of supplementary water. Boiling curve of this investigation is similar to a pool boiling curve, but it has one or two cap-shaped peaks in the transition regime. In the film boiling regime, the heat transfer rates are increased along with the increment of nozzle outlet velocity and subcooled temperature. There is optimum height of supplementary water for the augmentation of heat transfer Generalized correlations of boiling heat transfer are presented for maximum heat flux, minimum heat flux and $q_c$ at each supplementary height.

• 조명전기설비학회논문지
• /
• 제29권3호
• /
• pp.8-21
• /
• 2015

Technology for electric lighting has been evolving from Incandescent Lamp(IL) through Fluorescent Lamp(FL) and currently to Solid State Lighting(SSL) such as LED for more than 130 years of time. However, it took more than 100 years until the transition from IL to FL across overall society. That is because the transition is the Socio-Technical Transition(STT) which involves various social elements. This study investigated and analyzed the theories regarding STT, and applied the Multi-Level Perspective(MLP) theory to the case of electric lighting. A qualitative contents analysis was used with secondary data as research method, and the analyzed result was visualized based on the frame of MLP theory. The STT of electric lighting from IL to FL took place as the order of Technical Niche, Socio-Technical Regime and Landscape. Specifically, in Technical Niche level: Establishing Market Niche, Price-Performance Improvement, Learning Process and Support of Powerful Group took place. In Socio-Technical Regime level: Changes in Social Network, Changes in Technology and Changes in Rules. In Landscape level: Macro-Political Development, Socio-Economic Trends and Macro-Economic Trends took place in consecutive order.

• 한국사회복지학
• /
• 제65권3호
• /
• pp.265-289
• /
• 2013

이 연구의 목적은 메타경로분석의 방법론을 적용해 최근 부모수당제도의 도입을 중심으로 독일의 일-가정 양립정책과 젠더레짐의 변화의 실제와 동학을 규명하는 것이다. 일-가정 양립정책에서 '계층화'가 이루어지고 있는데, 정치적 장벽이 해소돼 부모수당제도를 도입할 수 있었던 반면 기존 가족주의 지지세력의 제도 내부적 장벽으로 인해 아동양육수당제도를 고수하지 않을 수 없었다. 그러나 부모수당제도는 '차별적인 성장'으로 활성화돼 독일 젠더레짐의 지배적인 구조를 '순차적 양립'에서 '동시적 양립'으로 변화시키는 핵심적인 보완성의 변화를 낳고 있다. 한편 주요 정치적 행위자들은 젠더영역에 대한 '의도적 분리'를 통해 전체 독일모델의 핵심적인 제도영역 간의 조정관계의 이완 가능성을 차단하려 하고 있다.

• 대한기계학회논문집B
• /
• 제24권6호
• /
• pp.860-869
• /
• 2000

Numerical and experimental investigations are performed for the molecular transition and slip flows in pumping channels of a disk-type drag pump. The flow occurring in the pumping channel develops from the molecular transition to the slip flow traveling downstream. Two different numerical methods are used in this analysis: the first one is a continuum approach in solving the Navier-Stokes equations with slip boundary conditions, and the second one is a stochastic approach through the use of the direct simulation Monte Carlo method. In the experimental study, the inlet pressures are measured for various outlet pressures in the range of 0.1{\sim}4Torr. From the present study, the numerical results of predicting the performance, obtained by both methods, agree well with the experimental data for the range of Knudsen number $Kn{\leq}0.1$ (i.e., the slip flow regime). But the results from the second method only agree with the experimental data for Kn>0.1(i.e., the molecular transition regime)