• Journal of Welding and Joining
• /
• 제16권5호
• /
• pp.67-75
• /
• 1998

This study aimed at he experimental and finite element analytic investigation of the effect of preheating on he residual stress of weldment. In this study, an autogenous arc welding was used on type 304 stainless steel and MARC as F.E.M. common code was utilized in analysis The analyses include transient and moving heat source and thermal properties as function of temperature. During welding, the thermal cycles of four locations in the weldment were recorded to investigate of the behavior of thermal stress and residual stress. The experimental and analytic results had good coincidence and show that there are two factors influencing the formation of welding residual stress in preheat process. One is the elevation of welding equilibrium temperature and the other is the increase of amount of heat input. The former decrease welding residual stress and the latter increase welding residual stress. Therefore, the cumulative effects result in the welding residual stress not being improved significantly with preheating in 304 stainless steel.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2297-2304
• /
• 2002

Two-dimensional and three-dimensional finite element methods have been used to analyze the deformation behavior of a shadow mask due to thermal and tension load. The shadow mask inside the Braun tube of a TV set has numerous slits through which the electron beams are guided to land on the designed phosphor of red, green or blue. Its thermal deformation therefore causes landing shift of the electron beam and results in decolorization of a screen. For the realistic finite element analysis, the effective thermal conductivity and the effective elastic modulus arc calculated, and then the shadow mask is modeled as shell without slits. Next a transient thermal analysis of the shadow mask is performed, wherein thermal radiation is a major heat transfer mechanism. Analysis of the resulting thermal deformation is followed, from which the landing shift of the electron beam is obtained. The present finite element scheme may be efficiently used to reduce thermal deformation of a shadow mask and in developing prototypes of a large screen flat TV.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1668-1677
• /
• 2013

This paper deals with the power loss and thermal characteristics of induction motor for machine tools according to the rated power and speed. To reduce the fabrication error by thermal strain in rotational machine tools, we calculated the power loss and thermal behavior of induction motors. Firstly, the inverse design of general induction motors for machine tool spindle has been performed. The inverse design results are compared with the torque-speed characteristic curve in motor's catalog. The power loss are calculated by finite element method(FEM) at rated condition. Secondary, the transient thermal characteristics of induction motors are calculated by equivalent thermal resistance model from Motor-CAD S/W. The inverse design, power loss and thermal behavior calculation for induction motors with various rated power and speed has been performed. Finally, to verify the design and calculation process of induction motor, we implemented the experimental set with 0.4kW 1710rpm class industrial induction motor model. The obtained thermal characteristics of experimental model confirmed that the design and power loss calculation processes are appropriate to the prediction of thermal strain in rotational machine tools.

• ETRI Journal
• /
• 제41권6호
• /
• pp.820-828
• /
• 2019

A highly reliable conductive adhesive obtained by transient liquid-phase sintering (TLPS) technologies is studied for use in high-power device packaging. TLPS involves the low-temperature reaction of a low-melting metal or alloy with a high-melting metal or alloy to form a reacted metal matrix. For a TLPS material (consisting of Ag-coated Cu, a Sn96.5-Ag3.0-Cu0.5 solder, and a volatile fluxing resin) used herein, the melting temperature of the metal matrix exceeds the bonding temperature. After bonding of the TLPS material, a unique melting peak of TLPS is observed at 356 ℃, consistent with the transient behavior of Ag₃Sn + Cu₆Sn₅ → liquid + Cu₃Sn reported by the National Institute of Standards and Technology. The TLPS material shows superior thermal conductivity as compared with other commercially available Ag pastes under the same specimen preparation conditions. In conclusion, the TLPS material can be a promising candidate for a highly reliable conductive adhesive in power device packaging because remelting of the SAC305 solder, which is widely used in conventional power modules, is not observed.

• Structural Engineering and Mechanics
• /
• 제42권6호
• /
• pp.815-829
• /
• 2012

This paper proposes a nonlinear computational modeling approach for the behaviors of structural systems subjected to fire. The proposed modeling approach consists of fire dynamics analysis, nonlinear transient-heat transfer analysis for predicting thermal distributions, and thermomechanical analysis for structural behaviors. For concretes, transient heat formulations are written considering temperature dependent heat conduction and specific heat capacity and included within the thermomechanical analyses. Also, temperature dependent stress-strain behaviors including compression hardening and tension softening effects are implemented within the analyses. The proposed modeling technique for transient heat and thermomechanical analyses is first validated with experimental data of reinforced concrete (RC) beams subjected to high temperatures, and then applied to a bridge model. The bridge model is generated to simulate the fire incident occurred by a gas truck on April 29, 2007 in Oakland California, USA. From the simulation, not only temperature distributions and deformations of the bridge can be found, but critical locations and time frame where collapse occurs can be predicted. The analytical results from the simulation are qualitatively compared with the real incident and show good agreements.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1096-1101
• /
• 2008

Concrete is shown the time dependent behavior after placing. The time dependent behavior of normal strength concrete that is used usually in present, were already examined closely lots of parameters by several investigators. however, high strength concrete is that the material characteristics are not definite and the experimental data are lacking. So, The goal of this study is to propose the material characteristics models, and to develop the routine of the time dependent behavior above 60 MPa. The thermal conductivity, the specific heat, the moisture diffusion coefficient, and the surface coefficient are proposed the suitable models through the parametric study. The structural element is used the 8-node solid element. The matrix equation is developed considering the transient heat transfer and moisture diffusion theory. The application of the time dependent behavior is used the finite differential method.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.172-174
• /
• 2003

In this paper, a 2D axisymmetric model of thermoelectric Finite Element Method (FEM) is developed to analyze the transient thermal behavior of Resistance Spot Welding (RSW) process using commercial software, called ANSYS. The determination of the contact resistance at the faying surface is moderately simplified to reduce the calculating time, while the temperature dependent material properties, phase change and convectional boundary conditions are taken account fur the improvement of the calculated accuracy. The thermal history of the whole process (including cooling) and temperature distributions for any position in the weldment is obtained through the analysis.

• 한국추진공학회지
• /
• 제7권1호
• /
• pp.10-17
• /
• 2003

액체 로켓의 추진제탱크 가압을 위해 사용되는 극저온 액체헬륨의 정상상태 및 천이상태 열유동 해석을 수치적으로 수행하였다 벽면에서의 단열 및 비단열 조건에 대한 정상 해석을 통하여 설계유량 및 설계유속을 만족시키는 헬륨 배관의 내경 및 압력손실, 온도변화 등을 조사하였으며 특히 단열조건에서도 헬륨의 온도는 주울-톰슨계수의 영향에 의해 증가하는 경향이 있음을 밝혀내었다. 그리고 국부적인 열유입 있을 경우에의 관내 헬륨의 온도 및 압력의 시간적 변화를 천이해석을 통하여 고찰하였으며 열유입부의 밀도 감소에 의한 열유입부 후단부의 속도 증가량을 예측하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권8호
• /
• pp.800-806
• /
• 1997

The behavior of de levels in rapid thermal annealed Fe-doped semi-insulating InP(100) was studied by photoinduced current transient spectrocopy(PICTS). In bulk InP, T2(Ec-0.24 eV), T3(Ec-0.30 eV) and T5(Ec-0.62 eV) traps were observed. After annealing the T2 trap was annihilated at 20$0^{\circ}C$ and recreated at 35$0^{\circ}C$. T3 trap was not affected below 40$0^{\circ}C$. With increasing temperature the concentration of T5 trap reduced and it was annihilated at 30$0^{\circ}C$. However the T1(Ec-0.16 eV) and T4(Ec-0.42 eV) traps were began to appear at 40$0^{\circ}C$and these concentrations were increased with annealing temperature. The T1 and T4 traps seem to be related to the isolated phosphorus vacancy( $V_{p}$) and $V_{p}$-indium antisite( $V_{p}$- $P_{in}$ ) or $V_{p}$-indium interstitial( $V_{p}$-I $n_{I}$) respectiely.respectiely.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 추계 학술대회논문집
• /
• pp.99-105
• /
• 2001

Flow computations have been conducted to study the impingement flowfield over the KSR-III flume deflector To validate Euler solver for the jet impingement flowfieid, the jet flow over a double wedge deflector have been calculated and showed reasonable agreement with experimental data. The transient flow behavior of flume over deflector have been investigated and the flume from the rocket nozzle proved to be getting out of the deflector safely and the thermal effect on the base region of rocket was not considerable.