• Transactions of Materials Processing
• /
• v.21 no.7
• /
• pp.441-446
• /
• 2012

A sequential coupled field analysis of electromagnetic free bulging was performed by using FEM. A 2D axi-symmetric electromagnetic model based on the magnetic vector potential is proposed for the calculation of magnetic field and Lorentz's forces. The Newmark integration method is used to calculate the transient dynamic plastic deformation of sheet during free bulging. In the finite element model, the effect of sheet deformation on the electromagnetic field analysis is taken into consideration. In order to confirm the sequential electromagnetic-mechanical coupling analysis, an experiment with an electromagnetic forming apparatus was conducted. The results showed that the final bulge height of the sheet predicted from the proposed method is in good agreement with experimentally measured height.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.87.2-87.2
• /
• 2010

The steady and dynamic process model for an internal reforming molten carbonate fuel cell power plant is discussed in this paper. The dominant thermal and chemical dynamic processes are modeled for the stack module and balance-of-plant, including cathode gas preparation, heat recovery, heat loss (Each heat loss amount for the stack and MBOP is obtained from real plant data) and fuel processing. Based on dynamic model and control demand, PID controllers are designed in the whole system. By applying these controllers we can obtain temperature balance of stack and control system depending on changing steam to carbon ratio, air feed amount, and transient condition.

• Transactions of Materials Processing
• /
• v.7 no.3
• /
• pp.298-305
• /
• 1998

In hot forging the blocker is a transient shape between the buster and the finisher, In general as the finisher shape becomes complicated the blocker design becomes quite difficult. In the present study an expert system is developed for the blocker die design of axisymmetric hot steel forging. It is a rule based system written in Fortran and AutoLISP operating on a personal computer. In this paper the major rules considered in the system are summarized and several blockers designed by the system are discussed with results of rigid viscoplastic finite element analysis.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.5
• /
• pp.330-339
• /
• 2015

Power quality (PQ) problems are becoming a big issue, since delicate complex electronic devices are widely used. We present a new denoising technique using discrete wavelet transform (DWT), where a modified correlation thresholding is used in order to reliably detect the PQ disturbances. We consider various PQ disturbances on the basis of IEEE-1159 standard over noisy environments, including voltage swell, voltage sag, transient, harmonics, interrupt, and their combinations. These event signals are decomposed using DWT for the detection of disturbances. We then evaluate the PQ disturbance detection ratio of the proposed denoising scheme over Gaussian noise channels. Simulation results also show that the proposed scheme has an improved signal-to-noise ratio (SNR) over existing scheme.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.298-303
• /
• 1997

Over the last few year, there has been a growing interest in quantitative representation of heat transfer phenomena in weld pools in order to relate the processing conditions to the quality of the weldment produced and to use this information for the optimisation and robotization of the welding process. Normally, a theoretical model offers a powerful alternative to check out the physical concepts of the welding process and to calculate the effects of varying any of parameters. To solve this problem, a transient 2D(two-dimensional) heat conduction were developed for determining bead geometry and temperature distribution for the GMA welding process. The equation was solved using a general thermofluid-mechanics computer program, PHOENICS code, which is based on the SIMPLE algorithm. The simulation results showed that the calculated bead geometry from the developed models reasonablely agree with the experiment results.

• Transactions of Materials Processing
• /
• v.16 no.2 s.92
• /
• pp.113-119
• /
• 2007

Rapid mold heating has been recent issue to enable the injection molding of thin-walled parts or micro/nano structures. Induction heating is an efficient way to heat material by means of an electric current that is caused to flow through the material or its container by electromagnetic induction. It has various applications such as heat treatment, brazing, welding, melting, and mold heating. The present study covers a finite element analysis of the induction heating process which can rapidly raise mold temperature. To simulate the induction heating process, the electromagnetic field analysis and transient heat transfer analysis are required collectively. In this study, a coupled analysis connecting electromagnetic analysis with heat transfer simulation is carried out. The estimated temperature changes are compared with experimental measurements for various heating conditions.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.365-367
• /
• 2005

Power system transients cause problems and disturbances that might be harmful to generators. However, very little have been done to systematically understand and analyze power system transients. There is also a lack of computational effective methods as transients are short and associated with a wide range of events and system conditions. This paper addresses to propose a signal processing method, ESPRIT, for the analysis of a range of transients due to disturbance. Experimental results are included to evaluate the usefulness of ESPRIT in power system transient analysis.

• Transactions of Materials Processing
• /
• v.15 no.1 s.82
• /
• pp.15-20
• /
• 2006

The rapid thermal response (RTR) molding is a novel process developed to raise the temperature of mold surface rapidly to the polymer melt temperature prior to the injection stage and then cool rapidly to the ejection temperature. The resulting filling process is achieved inside a hot mold cavity by prohibiting formation of frozen layer so as to enable thin wall injection molding without filling difficulty. The present work covers flow simulation of thin wall injection molding using the RTR molding process. In order to take into account the effects of thermal boundary conditions of the RTR mold, coupled analysis with transient heat transfer simulation is suggested and compared with conventional isothermal analysis. The proposed coupled simulation approach based on solid elements provides reliable thin wall flow estimation for both the conventional molding and the RTR molding processes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.77.3-77
• /
• 2002

In this paper, the algorithm for detecting the transient change of ST-segment and the device for measuring ECG from patient without restriction of activity are introduced. ST-segment elevation and depression is considered as the main characteristic in diagnosis of myocardial ischemia, but the change of pattern is also important. To consider all of the former and the latter, we used polynomial approximation for diagnosis of ECG. The feature points(R, S and T are detected through the signal processing processes including wavelet transform, and then R-S and S-T are approximated to polynomial. This method allows comparison of two signals that have different sampling time or different numbers of...

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.250-253
• /
• 2004

A finite element model is developed for the process of squeeze casting of metal matrix composites. The fluid flow and the heat transfer are fundamental phenomena in squeeze casting. The equations for the clear fluid flow and the flow in porous media are used to simulate the transient metal flow. To describe heat transfer in the solidification of molten aluminum, the energy equation is written in terms of temperature and enthalpy. A direct iteration technique is used to solve the resulting nonlinear algebraic equations. The cooling curves and temperature distribution during infiltration and solidification were calculated for a simplified model with pure aluminum. The developed program can be used for squeeze casting process of complex geometry, boundary conditions and processing parameter optimization.