• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.3 s.32
• /
• pp.37-45
• /
• 2004

Electroless Ni(P) has been widely used for under bump metallization (UBM) of flip chip and surface finish layer in microelectronic packaging because of its excellent solderability, corrosion resistance, uniformity, selective deposition without photo-lithography, and also good diffusion barrier. However, the brittle fracture at solder joints and the spatting of intermetallic compound (IMC) associated with electroless Ni(P) are critical issues for its successful applications. In the present study, the mechanism of IMC spatting and microstructure change of the Ni(P) film were investigated with varying P content in the Ni(P) film (4.6,9, and $13 wt.\%$P). A reaction between Sn penetrated through the channels among $Ni_3Sn_4$ IMCs and the P-rich layer ($Ni_3P$) of the Ni(P) film formed a $Ni_3SnP$ layer. Thickening of the $Ni_3SnP$ layer led to $Ni_3Sn_4$ spatting. After $Ni_3Sn_4$ spatting, the Ni(P) film directly contacted the molten solder and the $Ni_3P$ phase further transformed into a $Ni_2P$ phase. During the crystallization process, some cracks formed in the Ni(P) film to release tensile stress accumulated from volume shrinkage of the film.

• Journal of Chest Surgery
• /
• v.44 no.6
• /
• pp.406-412
• /
• 2011

Background: Development of thoracic aortic aneurysms and aortic dissections (TAAD) is attributed to unbearable wall tension superimposed on defective aortic wall integrity and impaired aortic repair mechanisms. Central to this repair mechanisms are well-balanced and adequately functional cellular components of the aortic wall, including endothelial cells, smooth muscle cells (SMCs), inflammatory cells, and adventitial fibroblasts. Adventitial fibroblasts naturally produce aortic extracellular matrix (ECM), and, when aortic wall is injured, they can be transformed into SMCs, which in turn are involved in aortic remodeling. We postulated the hypothesis that adventitial fibroblasts in patients with TAAD may have defects in ECM production and SMC transformation. Materials and Methods: Adventitial fibroblasts were procured from the adventitial layer of fresh aortic tissues of patients with TAAD (Group I) and of multi-organ donors (Group II), and 4-passage cell culture was performed prior to the experiment. To assess ECM production, cells were treated with TNF-${\alpha}$ (50 pM) and the expression of MMP-2/MMP-3 was analyzed using western blot technique. To assess SMC transformation capacity, cells were treated with TGF-${\beta}1$ and expression of SM ${\alpha}$-actin, SM-MHC, Ki-67 and SM calponin was evaluated using western blot technique. Fibroblasts were then treated with TGF-${\beta}1$ (10 pM) for up to 10 days with TGF-${\beta}1$ supplementation every 2 days, and the proportion of transformed SMC in the cell line was measured using immunofluorescence assay for fibroblast surface antigen every 2 days. Results: MMP-3 expression was significantly lower in group I than in group II. TGF-${\beta}1$-stimulated adventitial fibroblasts in group I expressed less SM ${\alpha}$-actin, SM-MHC, and Ki-67 than in group II. SM-calponin expression was not different between the two groups. Presence of fibroblast was observed on immunofluorescence assay after more than 6 days of TGF-${\beta}1$ treatment in group I, while most fibroblasts were transformed to SMC within 4 days in group II. Conclusion: ECM production and SMC transformation are compromised in adventitial fibroblasts from patients with TAAD. This result suggests that functional restoration of adventitial fibroblasts could well be a novel approach for the prevention and treatment of TAAD.

• Korean Journal of Bronchoesophagology
• /
• v.6 no.1
• /
• pp.29-37
• /
• 2000

Background and Objectives : The concentration of sulfur dioxide($SO_2$) gas in the ambient air appears increasing in the industry and urban area day by day. It was known that $SO_2$ is noxious gas. $SO_2$ can be irritating to the eyes, nose, throat, upper respiratory tract and skin. It produces sulfurous acid on contact with water and is extremely irritating to the nasopharynx and respiratory tract. Laminin is a family of extracellular matrix glycoproteins localized in the basement membrane that separates epithelial cells from the underlying stroma. The biological activities of laminin are to promote cell migration, wound healing, growth and differentiation. Meterials and Methods : The histologic changes and the expression of laminin in tracheal mucosa sacrificed at every weeks (to 7 weeks) after continued $SO_2$ exposure of 250ppm for 30 minutes a day were studied in rats. Results : Pathologic tissue was formed at the tracheal mucosa and the underlying tissue by the infiltration of monocytes and epithelium was transformed to the single cell layered epithelium above 5 weeks after exposure. At the 6 weeks after exposure, epithelial cells were partially lost and epithelial cell layer was transformed to be leaf-shaped. Submucosal tissue was transformed to be lymphatic tissue. An intense positive staining for laminin was found in apical cytoplasm and lateral surface of the normal epithelial cells and basement membrane but at the 5 and 6 weeks after exposure, laminin activity was decreased to the moderate activity. At the 7 weeks after exposure, laminin activity was decreased to the weak activity. Conclusion : Our finding suggests that $SO_2$ makes histologic damage on the tracheal mucosa and decreases immunoreactivity for laminin. Longer duration of the exposure of $SO_2$ makes more histologic damage on the tracheal mucosa and decreases immunoreactivity for laminin.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.562-572
• /
• 2005

Statement of problem : Titanium is widely used as an implant material lot artificial teeth. Also, studies on surface treatment to form a fine passive film on the surface of commercial titanium or its alloys and improving bioactivity with bone have been carried out. However, there is insufficient data about the biocompatibility of the implant materials in the body. Purpose: The purpose of this study was to examine whether the precipitation of apatite on titanium metal is affected by surface modification. Materials and methods: Specimens chemically washed for 2 minute in a 1:1:1.5 (in vol%) mixture of 48% HF 60% $HNO_3$ and distilled water. Specimens were then chemically treated with a solution containing 97% $H_2SO_4$ and 30% $H_2O_2$ at $40^{\circ}C$S for 1 hour, and subsequently heat-treated at $400^{\circ}C$ for 1 hour. All specimens were immersed in the HBSS with pH 7.4 at $36.5^{\circ}C$ for 15 days, and the surface were examined with TF-XRD, SEM, EDX and XPS. Also, commercial purity Ti specimens with and without surface treatment were implanted in the abdominal connective tissue of mice for 4 weeks. Conventional aluminium and stainless steel 316L were also implanted for comparison. Results and conclusions : The results obtained were summarized as follows. 1. An amorphous titania gel layer was formed on the titanium surface after the titanium specimen was treated with a $H_2SO_4$ and $H_2O_2$ solution. The average roughness was $2.175{\mu}m$ after chemical surface treatment. 2. The amorphous titania was subsequently transformed into anatase by heat treatment at $400^{\circ}C$ for 1 hour. 3. The average thickness of the fibrous capsule surrounding the specimens implanted in the connective tissue was $46.98{\mu}m$ in chemically-treated Ti, and 52.20, 168.65 and $100.95{\mu}m$ respectively in commercial pure Ti, aluminum and stainless steel 316L without any treatment.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.327-332
• /
• 1996

In this study, the effects of $WSi_x$, thickness and fluorine concentration in tungsten polycide gate structure on gate oxide were investigated. As $WSi_x$, thickness increases, gate oxide thickness increases with fluorine incorporation in gate oxide, and time-to-breakdown($T_{BD,50%}$) of oxide decreases. The stress change with $WSi_x$ thickness was also examined. But it is understood that the dominant factor to degrade gate oxide properties is not the stress but the fluorine, incorporated during $WSi_x$ deposition, diffused into $WSiO_2$ after heat treatment. In order to understand the effect of fluorine diffusion into oxidem fluorine ion implanted gates were compared. The thickness variation and $T_{BD,50%}$ of gate oxide is saturated over 600 $\AA$ thickness of $WSi_x$. The TEM and SIMS studies show the microstructure less than 600 $\AA$ thickness is dense and flat in surface. However, over 600$\AA$, the microstructure of $WSi_x$ is divided into two parts: upper porous phase with rugged surface and lower dense phase with smmoth interface. And this upper phase is transformed into oxygen rich crystalline phase after annealing, and the fluorine is captured in this layer. Therefore, the fluorine diffusion into the gate oxide is saturated.

• 보존과학연구
• /
• s.17
• /
• pp.161-182
• /
• 1996

In natural atmosphere, copper and copper alloy have been used to make buddha statues and ornaments of historic buildings since the abovementioned metals have corrosion resistance in some extent, and the patinaformed on the surface of the metals has provided the people aesthetic satisfaction with its beauty. But in atmosphere polluted by $SO_x$and $NO_x$, the patina layer does not work as a protective film, and it allows damages of the metal. Since 1992, Tokyo National Research Institute of Cultural Properties(TNRICP)has conducted studies on the influence of atmospheric pollution on metal cultural property held under open air. The Great Buddha Image which is located in Kamakura about 50km west from Tokyo, has been selected as one of the objects to study because it is made by copper alloy and it has stood exposed in the air for about a few hundreds years. Furthermore it is also the reason to study on it that there are many cultural properties in the surroundings of it. We have analysed the components and the structure of the corrosion products formed on the surface of the Buddha, have carried out exposure tests using the alloy samples which have simulated the components of the Great Image, and have observed climated and polluted air in order to discuss the relation between corrosion of metals in open air and conditions of the atmosphere. In this paper, the authors have described the components and the structure of the corrosion product formed on the surface of the Great Image by means of X-ray fluorescence spectroscopy and X-ray diffraction. The conclusions are as follows. (1) Sulfate patina composed mainly with brochantite were detected on the all sides of the Image and the amount of the patina is found more on the back of the Image facing to north. (2) Antlerite were detected on the back and a park of the left side facing to west, and formation of it was considered to have close relation with malignant atmosphere. (3) A big amount of chloride patina which mainly composed of atacamite were observed on the front facing to south. (4) Carbonate patina mainly composed of malachite were detected on the area where brochantite was often detected as well. It suggested that malachite had been transformed into brochantite by deteriorated atmosphere. (5) On the all sides of the Image, patina were observed together with copper oxides mainly composed of cuprous oxide. It showed that the surface layer of the Image consists of two layers : inner layer of oxide and outer layer of patina. (6) Corrosion products of lead which was a component of copperalloy were detected on the all sides : the main lead product found on the front was chlorophosphate whereas the one on the back was sulfate.

• Korean Journal of Ichthyology
• /
• v.22 no.4
• /
• pp.230-237
• /
• 2010

Histological observation on the seasonal variation of mucus cells of the mud loach Misgurnus mizolepis inhabiting a natural stream was carried out on three skin regions (dorsal, lateral and occiput) from March 2008 to February 2009. Our results showed no differences in general morphology by season, but the mucus cells of the epidermis showed significant seasonal change in their size and number as the water temperature changed. The ratio of surface area of the mucus cell layer and mucus cells, and the number of mucus cells in surface area of the epidermis were the greatest in the cold winter and the least in the hot summer in all regions of the epidermis. In particular, the occiput seemed to be a very sensitive region in response to environmental change, showing wide fluctuations in the size of mucus cells throughout the year and a great change in between seasons, especially from late autumn to early winter when the temperature decreased. As the temperature became colder, a small and spherical-shaped mucus cell was transformed into a large and elongated columnar form with a lot of secreted mucus material in a superficial layer of the epidermis. From our results, we can safely surmise that cold temperature is an important environmental factor having a close relationship with the modification of mucus cells of M. mizolepis in winter.

• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.742-751
• /
• 1996

Ti-48Al(at.%) specimens were coated with Al-21Ti-23Cr(at.%) film by RF magnetron sputtering. Ti-48Al specimen coated at 200, 0.8Pa and 573K showed the best oxidation resistance property in the isothermal oxidation test. Al-21Ti-23Cr film was amophous after depostion, but crystallized and fromed a protective ${Al}_{2}{O}_{3}$ layer on the surface during oxidation. Ti-48Al specimens coated at 573K have been sassessed by isothermal oxidation test for 100 hours at 1073K, 1173K and 1273K. The mass gain curves showed that parabolic stage continued at al tested temperature range in isothermal oxidation test, and the excellent oxidation resistance is attriutable to the formation of a protective ${Al}_{2}{O}_{3}$ layer on the surface of Al-21Ti-23Cr film. After oxidation test at 1273K, the matrix of Al-21Ti-23Cr film had transformed into TiAlCr phase due to the depletion of Al during oxidation and the diffusion of Ti from the substrate, and the extent of mass gain of the specimen increased compared with that of specimens tested at lower temperature.

• Journal of fish pathology
• /
• v.24 no.3
• /
• pp.205-211
• /
• 2011

All of the crucian carp, Carassius auratus and 50% of common carp. Cyprinus carpio examined in this study were infected with the leeches, Limnotrachelobdella sinensis. Especially, the infection of C. carpio with L. sinensis was the first report in Korea. The gill of C. auratus showed increased hydrophic degeneration of epithelial cell in the filament, blood congestion, hyperplasia of epithelial cell in the filament and lamellae. In the SEM observation, gill filament was transformed to the cylinder form by the lamellae fusion. The lamellae surface showed degeneration, fragmentation of microridges. The extracellular cartilaginous matrix of the filaments was exposed by the collapse of epidermal layer. In the 18S rRNA analysis of L. sinensis, the relationships among these groups are not clear and not concord with their morphological classification.

• Membrane and Water Treatment
• /
• v.11 no.5
• /
• pp.323-331
• /
• 2020

With the increasing demand on reverse osmosis (RO) membranes for water purification worldwide, the number of disposed membrane elements is expected to increase accordingly. Thus, recycling and reuse of end-of-life RO membranes should be a global environmental action. In this work, we aim to reuse the spent RO membrane for nanofiltration (NF) and ultrafiltration (UF) process by subjecting the spent membrane to solvent and oxidizing solution treatment, respectively. Our results showed that solvent-treated RO membrane could perform as good as commercial NF membrane by achieving similar separation efficiencies, but with reduced water permeability due to membrane surface fouling. By degrading the polyamide layer of RO membrane, the transformed membrane could achieve high water permeability (85.6 L/㎡.h.bar) and excellent rejection against macromolecules (at least 87.4%), suggesting its reuse potential as UF membrane. More importantly, our findings showed that in-situ transformation on the spent RO membrane using solvent and oxidizing solution could be safely conducted as the properties of the entire spiral wound element did not show significant changes upon prolonged exposure of these two solutions. Our findings are important to open up new possibilities for the discarded RO membranes for reuse in NF and UF process, prolonging the lifespan of spent membranes and promoting the sustainability of the membrane process.