• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1921-1926
• /
• 2003

Nano-imprint technology has been vigorously studied by many researchers for it is one of the most promising technologies for manufacturing the pattern with its critical dimension below 100nm. In the nano-imprint technology, nano patterns are transferred on a polymer film and the transferred patterns are used as an etch mask to define the designed patterns on a substrate or a metal layer. To this end, it is important to keep the residual thickness of the imprinted polymer film uniform. In this study, a novel measurement technique to measure the residual thickness of films is proposed based on nanoindentation theory. This technique has advantages of saving time and measuring the residual thickness of highly-localized portions in comparison with other techniques, but has limitation of requiring calibration process.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.8
• /
• pp.467-472
• /
• 2000

A three-level decoupled sliding mode controller is developed to achieve asymptotic stability for a class of sixth-order nonlinear systems. The sixth-order system is decoupled into three subsystems according to the structure of the whole system. Each subsystem has a separate control target in the form of a sliding surface. The information of the third sliding surface is transferred to the second one through an intermediate variable and the information of the second sliding surface is transferred to the first one through another intermediate variable. Consequently, the controller designed on the basis of the first sliding surface can make three subsystems move toward their sliding surfaces, respectively. The three-level decoupled sliding mode controller is applied to the double-inverted pendulum problem where the zero stable states are required.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.498-498
• /
• 2012

직류 아크 토치를 이용하여 열플라즈마를 발생시키는 방법은 전극의 구성에 따라 크게 비이송식(non-transferred)과 이송식(transferred)의 2가지 형태로 나눌 수 있다. 1950년대 H. Maecker 등에 의해 이론적 기초가 형성되기 시작한 이송식 아크 플라즈마 발생장치는 처리 대상물질을 전극으로 사용하여 양극에서의 에너지 전달을 직접 이용할 수 있으므로 열효율이 매우 높기 때문에 이를 이용한 고출력 토치에 관한 활발한 연구가 지속되고 있다. 본 연구에서는 대기압 아르곤 자유연소아크 방전에 의해 발생되는 열플라즈마의 열유동 특성을 수치적으로 해석하기 위하여 아크 기둥의 온도, 압력 및 속도 특성을 Navier-Stokes 방정식과 Maxwell 방정식을 연계 계산하였다. 또한 아크-전극 상호작용(arc-electrode interaction) 모델링을 통한 양극(anode)인 처리 대상물질로의 에너지 플럭스 유입을 고려하여 전극 내부의 온도분포를 계산하였다. 해석결과를 검증하기 위하여 음극과 양극 사이 플라즈마 기둥(column)의 중심축 온도는 Haddad & Farmer(1984)의 실험데이터와 비교하였고, 양극으로의 에너지 플럭스 및 온도분포 데이터는 Bini 등(2006)의 실험 및 해석데이터와 비교하여 만족스런 일치를 확인하였다.

• Korean Journal of Animal Reproduction
• /
• v.17 no.3
• /
• pp.201-207
• /
• 1993

We determined whether the ultrarapid freezing method is applicable to micromanipulated mouse embryos. One-cell mouse embryos were microinjected with MThGH gene. Nuclei from one-cell embryos of F1(C57BL$\times$CBA) mice were transplanted into enucleated one-cell embryos of ICR mice. The injected and nucleated embryos that developed to 2-cell stage were cryopreserved by ultrarapidfreezing. The embryos equilibrated in freezing medium(3 M DMSO＋0.25 M sucrose＋2% FBS in PBS) were directly immersed into liquid nitrogen and then thawed in 37$^{\circ}C$ water. Development rates of the microinjected and nuclear-transplanted embryos to blastocyst stage after ultrarapidly freezing and thawing were 31% and 55%, respectively. The frozen-thawed embryos were transferred to pseudopregnant recipient, which then gave birth to 17 offsprings. Twelve(14% of the transferred embryos) and five(20%) offsprings were derived from microinjected and nuclear-transplanted embryos, respectively. The results indicate that the DNA injected and nuclear-transplanted mouse embryos are cryopreservable at 2-cell stage by ultrarapid freezing method.

• Journal of Sensor Science and Technology
• /
• v.21 no.5
• /
• pp.385-388
• /
• 2012

This paper describes the synthesis and characterization of graphene by RTA process. Amorphous 3C-SiC were deposited using APCVD for carbon source and Ni layer were employed for transition layer. Various parameters of the ramping speed, the annealing time and the cooling speed are evaluated for the optimized combination allowed for the reproducible fabrication of graphene using 3C-SiC thin film. For analysis of crystalline Raman spectra was employed. Transferred graphene shows a high IG/ID ratio of 2.73. SEM and TEM images show the optical transparency and 6 carbon network, respectively. Au electrode deposited on the transferred graphene shows linear I-V curve and its resistance is 358 ${\Omega}$.

• Journal of Embryo Transfer
• /
• v.9 no.2
• /
• pp.161-166
• /
• 1994

This experiment was carried out to produce cloned aniraals by nuclear transplantation in rabbits. The ovulated oocytes were collected from the oviducts between 14 and 15 hours after hGG injection. The denuded oocytes were used as nuclear recipient cytoplasm following enucleation by micromanipulation. The blastomeres separated from the 8-cell embryos were used as nuclear donor. The nucleated oocytes receiving a blastomere in the perivitelline space were electrically fused in the 0.28 M mannitol solution at 1.5 kV /cm, 60$\mu$sec for three times. The nuclear transplant embryos which were used and developed to 2- to 4-cell stage in vitro were transferred into the oviducts of synchronized recipient does. A total of 64 nuclear transplant embryos were transferred to 7 recipient does and produced three offspring(4.7%) from a foster mother 31 days after embryo transfer.

• Journal of Biosystems Engineering
• /
• v.40 no.2
• /
• pp.102-109
• /
• 2015

Purpose: Slow manual harvesting of rain-fed chickpeas cultivated in fallow fields in developing countries have encouraged the design of a mechanical harvester. Methods: A tractor-pulled harvester was built, in which a modified stripper header detached pods from an anchored plant and a chain conveyor transferred material. The stripper harvester was redesigned to use: 1) the maneuverability of tractor-mounted frames, 2) the adaptability of floating headers, and 3) the flexibility of pneumatic conveyors. Results: A mobile vacuum conveyor, which was an innovator open system, was designed for the dilute phase transferring mode for both grain and material other than grain. A centrifugal fan transferred harvested material to a cyclone separator that settled harvested material in a grain tank 1 m high. The machine at the spot work rate of $0.42ha{\cdot}h^{-1}$ harvested chickpea pods equal to the output of 16.6 farm laborers. Conclusion: The low cost and reasonable projected purchase price are the advantages of the concept. Additionally, the shattering loss reduction confirms the feasibility of the prototype chickpea harvester for commercialization.

• Journal of Bio-Environment Control
• /
• v.15 no.2
• /
• pp.173-176
• /
• 2006

The relationship between source leaf position and photo-assimilate translocation and distribution was characterized for tomato (Lycopersicon esculentum Mill) grown in the greenhouse. Three different positions of source leaf on the stem (first node above or below the first fruit cluster and $5^{th}$ node above the first fruit cluster) were tested for their influence on $^{14}CO_2$ assimilation and transfer to different parts of the plant. The leaves at the $5^{th}$ node above the first fruit cluster transferred the highest (57%) proportion of $C^{14}$ to other plant parts, followed by leaves home on the first node below the first fruit cluster (50%), and the first node above the first fruit cluster (39%). In all treatments, fruits served as the strongest sink for $C^{14}$, followed by stem, leaf, and root tissues. The leaf home on the $5^{th}$ node above the first fruit cluster transferred the largest amount of $C^{14}$ to the second fruit cluster.

• Plant Resources
• /
• v.6 no.2
• /
• pp.89-93
• /
• 2003

This study was conducted to develop the clonal propagation technique through in vitro culture using basal stem explants in Phalaenopsis hybrid grown in vitro. The highest frequency of protocorm-like body (PLB) formation was obtained when basal stem explants were cultured on VW medium containing 30g/L sucrose, 500 mg/L activated charcoal, 150 ml/L coconut water, 1 mg/L NAA, 5 mg/L 2iP and 2.5g/L gel rite. PLBs transferred to Hyponex medium were regenerated to plantlets. Plantlets transferred to plastic pots containing spagnum moss were developed and successfully acclimatized under greenhouse. The flower was bloomingly opened in plants regenerated from basal stem explants. The flower was not different from both mother plant and plant induced through clonal propagation of Phalaenopsis hybrid.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.10
• /
• pp.139-147
• /
• 1996

In this study a two-stage fast pulse generaor using magnetic switches is proposed. The scheme consist of a switch, an inductor and two pairs of capacitor and saturable inductors, a linear transformer. The basic principle and the operation are described using a set of given parameters. The main issue of the magnetic pulse genration scheme is the system efficiency. This study focuses on the system efficiency improvement using magnetic switches. The voltage compression ratio, energy transfer with respect to core area are investigated. The output voltage and transferred energy as a function of input voltage are also included. Also, an analysis and experiments are performed to verify the porposed topology by implementing a 10[J] class experimental circuit. The efficiency of the transferred energy a tload side is 82%.