• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.8
• /
• pp.698-706
• /
• 2004

Heat transfer coefficients of enhanced tubes in a flooded evaporator are measured through Wilson Plot method. And the correlations are proposed to design a flooded evaporators. Overall heat transfer coefficients are composed of the heat transfer coefficients both inside and outside tubes. Usually the experiments have been conducted separately. But there have been many difficulties like setting up the equipments and measuring the wall temperature. Wilson Plot method makes it possible to measure the separated transfer coefficients at the same equipment through experimental skills. So the cost and time can be reduced. And the results are reliable enough to use for design. Heat transfer coefficients inside the tube were able to be correlated uniquely in spite of various outside conditions. Boiling heat transfer of R134a is more dependent on the saturation temperature and much higher than that of R123.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.185-190
• /
• 2007

For the successful design of heat exchangers, it is very important to understand local heat transfer characteristics on the circular cylinder of the cross flow heat exchangers. In this study, the heat exchanger using screen is developed to enhance heat transfer. The naphthalene sublimation technique is employed to measure the local heat transfer coefficients in the heat exchanger. The experiments are performed for single circular tube, in-line array tube bank with and without heat transfer promoter. Local Nusselt numbers of single circular tube and tube bank with heat transfer promoter are investigated and compared to those of without heat transfer promoter.

• Information Display
• /
• v.19 no.6
• /
• pp.41-51
• /
• 2018

Micro LED, which is emerging as a next generation display, is difficult to commercialize due to various technical problems to date. In particular, transfer technology that transfers small LED to a display substrate in micro units is a key technology that can bring commercialization and is an important variable. The core of transfer technology is to move the LED quickly and accurately to the desired location. Therefore, it is necessary to pay attention on the transfer technology which is the most important task of Micro LED, and we analyzed and summarized the transfer technology using Elastomer Stamp which is one of the advanced transfer technologies.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.1
• /
• pp.63-67
• /
• 2021

Accurate measurements of the heat transfer coefficients of concentric annular space for the test section is important to measure the tube-side heat transfer coefficients of working fluids. This paper presents the annular side heat transfer coefficients of concentric annuli with variation of tube diameter ratios using Wilson plot method. The test facility has a straight, horizontal test section with an active length of 3.0 m. Inner/outer diameters of test tubes are 7.0/7.5 and 8.0/8.56 mm, respectively. An outer diameter of annulus side is 16.0 mm. The test results show that convective heat transfer coefficients in annuli increase with annular diameter ratio. The correlations for convective heat transfer coefficients in annuli are also developed.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.885-892
• /
• 2012

Energy transfer dynamics of excited vibrational energy of OH stretching bonds in liquid water is theoretically studied. With time-dependent vibrational Hamiltonian obtained from a mixed quantum/classical calculation, we construct a master equation describing the energy transfer dynamics. Survival probability predicted by the master equation is compared with numerically exact one and we found that incoherent picture of energy transfer is reasonably valid for long-time population dynamics. Within the incoherent picture, we assess the validity of independent pair approximation (IPA) often introduced in the theoretical models utilized in the analysis of experimental data. Our results support that the IPA is almost perfectly valid as applied for the vibrational energy transfer in liquid water. However, proper incorporation of radial and orientational correlations between two OH bonds is found to be critical for a theory to be quantitatively valid. Consequently, it is suggested that the Forster model should be generalized by including the effects of the pair correlations in order to be applied for vibrational energy transfer in liquid water.

• Journal of Mechanical Science and Technology
• /
• v.14 no.5
• /
• pp.537-546
• /
• 2000

The heat transfer characteristics of refrigerant-oil mixture for horizontal in-tube evaporator have been investigated experimentally. A smooth copper tube and a micro-fin tube with nominal 9.5 mm outer diameter and 1500 mm length were tested. For the pure refrigerant flow, the dependence of the axial heat transfer coefficient on quality was weak in the smooth tube, but in the micro-fin tube, the coefficients were 3 to 10 times greater as quality increases. Oil addition to pure refrigerant in the smooth tube altered the flow pattern dramatically at low mass fluxes, with a resultant enhancement of the wetting area by vigorous foaming. The heat transfer coefficients of the mixture for low and medium qualities were increased at low mass fluxes. In the micro-fin tube, however, the addition of oil deteriorates the local heat transfer performance for most of the quality range, except for low quality. The micro-fin tube consequently loses its advantage of high heat transfer performance for an oil fraction of 5%. Results are presented as plots of local heat transfer coefficient versus quality.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.165-165
• /
• 2023

Streamflow prediction is a critical task in water resources management and essential for planning and decision-making purposes. However, the streamflow prediction is challenging due to the complexity and non-linear nature of hydrological processes. The transfer learning is a powerful technique that enables a model to transfer knowledge from a source domain to a target domain, improving model performance with limited data in the target domain. In this study, we apply the transfer learning using the Informer model, which is a state-of-the-art deep learning model for streamflow prediction. The model was trained on a large-scale hydrological dataset in the source basin and then fine-tuned using a smaller dataset available in the target basin to predict the streamflow in the target basin. The results demonstrate that transfer learning using the Informer model significantly outperforms the traditional machine learning models and even other deep learning models for streamflow prediction, especially when the target domain has limited data. Moreover, the results indicate the effectiveness of streamflow prediction when knowledge transfer is used to improve the generalizability of hydrologic models in data-sparse regions.

• Journal of Embryo Transfer
• /
• v.5 no.2
• /
• pp.11-22
• /
• 1990

Remarkable progress has recently been made in embryo transfer technology, resulting in the birth of IVF and nuclear transfer offsprings in swine. However, further progress of the technology to (I) make a safe, effective and economic estrual-cycle synchronization compound, (2) regulate each step of sperm capacitation (3) induce monospermic fertilization, (4) in vitro grow and mature oocytes, (5) fertilize the oocytes efficently, (6) culture the oocytes to the blastocyst stage in defined media, (7) produce multiply copies of embryos with superior genetic merit, (8) preselect the sex of these superior offsprings, and (9) preserve embryos by freezing and storage in liquid nitrogen is required before this promising technology is applied routinely to swine for practical use.

• Journal of Distribution Science
• /
• v.12 no.1
• /
• pp.35-46
• /
• 2014

Purpose - This Study aims to promote technology transfer commercialization and ultimately make contribution towards enhancement of the success rate of commercialization of technology transfer at national level by deducing the factors that impart influence on the negotiation at the time of technology trading between the seller and buyer of technology of public research institutions subjected to transfer and sales. Research design, data and methodology - This Study deduced 5 research hypotheses through preceding researches related to technology transfer commercialization related technology marketing for technology trading negotiation. This Study was conducted by verifying the hypotheses through multiple regression analysis. Results - As the result of the Study, the research hypothesis H1, 'Promotion of commercialization of technology transfer trading will be affected in accordance with the innate characteristic factors of the technology', and H5, 'Promotion of commercialization of technology transfer trading will be affected in accordance with the mutual factors of the parties of the technology trading', among the 5 research hypotheses were chosen. Conclusions - It was found that the technology seller must be able to demonstrate technological value of the technology being sold in order to successfully conclude technology transfer trading negotiation and mutual understanding and harmonious communication between the parties.

• Journal of Institute of Convergence Technology
• /
• v.5 no.1
• /
• pp.27-31
• /
• 2015

A Pin-fin array is widely used to enhance the heat transfer in the internal cooling passage. The heat transfer distribution around the pin-fin is varied by the horseshoe vortex and flow separation. The difference of heat transfer coefficient induces the large thermal stress, which is one of the major reasons to break of hot components. So, it is required to enhance the heat transfer on the back side of pin-fin to solve the thermal stress problem. This study suggests the pin-fin with inclined jet hole and complex pin-fin/dimple array to enhance the heat transfer on the back side of pin-fin. The heat transfer coefficient is predicted by the numerical analysis, which is performed by CFX 14.0. The numerical results are obtained at Reynolds number, 10,000. The results show that the heat transfer on the back side of pin-fin is increased in both cases. Beside, the wake, which comes from dimple and jet, helps to develop the horseshoe vortex and increase the heat transfer on the next row pin-fin.