• Title/Summary/Keyword: Transfer opportunity

Search Result 81, Processing Time 0.034 seconds

Biological Resources Potential and the Recent State of International Cooperation in Indonesia

  • Park, Chang-Ho;Junaedi, Ahmad;Lee, Mi-Ra;Lee, Yeon-Hee
    • Interdisciplinary Bio Central
    • /
    • v.2 no.4
    • /
    • pp.11.1-11.8
    • /
    • 2010
  • Indonesia is a mega-biodiversity country having at least one trillion US Dollars value of biological resources per year over the next 20 years. Indonesia is home to 11 percent of the world's flowering plant species and 12 percent of all mammals. Many of Indonesia's species and more than half of the archipelago's endemic plant species are found nowhere else on the Earth. This information is just a small portion of all higher plants and animals being found in Indonesia. Former studies described that total number of species in Indonesia is estimated more than 1,000,000 and most of them remain unknown scientifically. Most of lower plants and animals have not been studied yet, so that greatest portion of Indonesia's biological resources has never been assessed with respect to its economic value or conservation status. Many developed countries are building cooperation with Indonesia on resources, mainly in the fields of grant aid, socio-economic services, R & D, researcher exchange, technology transfer, infrastructure, education/training, finance, etc. Indonesia will obtain greater benefits and management of its biological richness via increasing its international capacity to add value and information to its biological diversity. These goals can be achieved by close international collaboration on search of important biological resources and other bioactive products that have potential economic values. Development of biological resource-based technology stands as the industry of the $21^{st}$ century and, therefore, Indonesia has a unique opportunity to lead the process in the world.

Legal Aspects of International Joint Ventures (합작투자계약(合作投資契約)에 관한 법적(法的) 문제(問題))

  • Park, Whon-Il
    • THE INTERNATIONAL COMMERCE & LAW REVIEW
    • /
    • v.18
    • /
    • pp.159-188
    • /
    • 2002
  • International joint ventures are usually formed and managed by domestic companies and foreign investors for the common objectives. They offer an opportunity for each partner to benefit significantly from the comparative advantages of the other. Local partners bring knowledge of the domestic market; familiarity with government bureaucracies and regulations; understanding of local labor markets; and existing manufacturing facilities. Foreign partners can offer advanced process and product technologies, management know-how, and access to export markets. In Korea, joint ventures have been encouraged to usher in foreign investors with foreign currency capital badly needed during the IMF financial crisis. In the meantime, Korean laws and regulations with respect to joint ventures have been largely overhauled to promote foreign direct investment (FDI) both inbound and outbound. They include four types of FDI, i.e., acquisition of foreign stocks, provision of long-term loans, participation in joint operations like resources development, and establishment of foreign offices. From the legal point of view, the formal joint venture agreement must be an offspring of a series of tough negotiations between domestic and foreign partners. They usually stress the long-term relationship with the good will and dedication to each other, and restrict the free transfer of stocks. Both partners are earnestly interested in the ownership and management of the joint venture. So they keep a close eye on the articles of incorporation, changes of business environment, conflict resolution methods, transparency of accounting and other financial matters. When a multinational corporation (MNC) is involved in the joint venture, conflicts over management strategies, marketing and other issues take place more often than not between the MNC and local partners. We have to pay attention to joint ventures, particularly, in China and North Korea. As witnessed in other transition economies, China is eagerly bringing in foreign direct investments for the development of nation's economy. China encourages foreign investors to establish ordinary joint ventures, contractual joint ventures, solely invested foreign capital companies and jointly operated development companies with local partners. In North Korea, however, joint ventures have a different meaning like contractual joint ventures in China, in which North Korean partners have an initiative in the management. Rather, jointly operated companies or simply processing-for-wage companies are recommended in view of the unpredictable legal infrastructure in North Korea.

  • PDF

Simulation study of DAF flotation basin using CFD (전산유체해석기법을 이용한 용존공기부상공정의 유동해석)

  • Park, Byungsung;Woo, Sungwoo;Park, Sungwon;Min, Jinhee;Lee, Woonyoung;You, Sunam;Jun, Gabjin
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.27 no.2
    • /
    • pp.261-272
    • /
    • 2013
  • Algae boom (Red tide) in south coastal area of Korea has been appeared several times during a decade. If algae boom appears in the desalination plant, media filter and UF filter are clogged quickly, and the plant should be shutdown. In general, Algae can be removed from water by flotation better than by sedimentation, because of the low density of algal cell. The purpose of this study conducts the CFD simulation of DAF flotation basin to apply the design of the dissolved air flotation with ball filter in the Test Bed for SWRO desalination plant. In this study, Eulerian-Eulerian multiphase model was applied to simulate the behavior of air bubbles and seawater. Density difference model and gravity were used. But de-sludge process and mass transfer between air bubbles and seawater were ignored. Main parameter is hydraulic loading rate which is varied from 20 m/hr to 27.5 m/hr. Geometry of flotation basin were changed to improve the DAF performance. According to the result of this study, the increase of hydraulic loading rate causes that the flow in the separation basin is widely affected and the concentration of air is increased. The flow pattern in the contact zone of flotation basin is greatly affected by the location of nozzle header. When the nozzle header was installed not the bottom of the contact zone but the above, the opportunity of contact between influent and recycle flow was increased.

Development of Korean standard dental hygiene curriculum proposal (한국 치위생(학)과 표준교육과정안 개발)

  • Won, Bok-Yeon;Jang, Gye-Won;Hwang, Mi-Yeong;Kim, Seol-Ak;Jang, Jong-Hwa
    • Journal of Korean society of Dental Hygiene
    • /
    • v.13 no.1
    • /
    • pp.1-12
    • /
    • 2013
  • Objectives : In order to make a proposal of a Korean standard dental hygiene curriculum, the job description of the National Health Personnel Licensing Examination Board was analyzed to prepare a job analysis matrix of dental hygienist to select required core competency. Methods : Data were analyzed to test the job validity of dental hygienist and categorize the duties of dental hygienist. A proposal of a standard dental hygiene curriculum was mapped out by making a comparative analysis of the courses necessary for American authorization of dental hygiene curriculum, existing proposals of Korean standard dental hygiene curriculum and the courses of the departments of dental hygiene offered by domestic three-year colleges and four-year universities. Results : Basic medicine courses were reinforced or newly offered to provide an opportunity for students to transfer to a domestic four-year university or to a foreign university. In the field of clinical dental hygiene and practice, preventive dentistry, prophylaxis and practice were integrated, and the names of the related courses were unified to give a chance for students to engage in comprehensive dental hygiene practice. There were different courses for dental clinical science at present. In this proposal, students should earn 125 credits in total. Conclusions : Standard dental hygiene curriculum proposal was required by three-year and four-year colleges across the nation. To make it happen, the original names of dental hygiene courses should be used, and the dental hygiene certification and evaluation institute that is under the umbrella of the Korean Dental Hygienists Association should lay out the standard of the KSDHEP to facilitate the utilization of the standard dental hygiene curriculum proposal.

Differentiated Channel Access Scheme for Assuring QoS of Medical Traffic in WLAN-based e-Healthcare Systems (무선랜 기반 e-Healthcare 시스템에서의 의료용 트래픽의 서비스 품질 보장을 위한 채널 접속 차별화 방안)

  • Kim, Young Boo;Park, Eun-Chan
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.20 no.6
    • /
    • pp.676-688
    • /
    • 2014
  • The IEEE 802.11e EDCA (Enhanced Distributed Channel Access) mechanism has been proposed to improve the QoS (Quality of Service) of various services in WLANs (Wireless Local Area Networks). By differentiating the channel access delay depending on ACs (Access Categories), this mechanism can provide the relative service differentiation among ACs. In this paper, we consider that WLAN is deployed in medical environments to transfer medical traffic and we reveal that the quality of the medical traffic (in particular, ECG signals) is significantly deteriorated even with the service differentiation by IEEE 802.11e EDCA. Also, we analyze the reason for performance degradation and show that IEEE 802.11e EDCA has difficulty in protecting the transmission opportunity of high-priority traffic against low-priority traffic. In order to assure medical-grade QoS, we firstly define the service priority of medical traffic based on their characteristics and requirements, and then we propose the enhanced channel access scheme, referred to as DIFF-CW. The proposed scheme differentiates CW (Contention Window) depending on the service priority and modifies the channel access procedure for low-priority traffic. The simulation results confirm that the DIFF-CW scheme not only assures the QoS of medical traffic but also improves the overall channel utilization.

Strut-tie model for two-span continuous RC deep beams

  • Chae, H.S.;Yun, Y.M.
    • Computers and Concrete
    • /
    • v.16 no.3
    • /
    • pp.357-380
    • /
    • 2015
  • In this study, a simple indeterminate strut-tie model which reflects complicated characteristics of the ultimate structural behavior of continuous reinforced concrete deep beams was proposed. In addition, the load distribution ratio, defined as the fraction of applied load transferred by a vertical tie of truss load transfer mechanism, was proposed to help structural designers perform the analysis and design of continuous reinforced concrete deep beams by using the strut-tie model approaches of current design codes. In the determination of the load distribution ratio, a concept of balanced shear reinforcement ratio requiring a simultaneous failure of inclined concrete strut and vertical steel tie was introduced to ensure the ductile shear failure of reinforced concrete deep beams, and the primary design variables including the shear span-to-effective depth ratio, flexural reinforcement ratio, and compressive strength of concrete were reflected upon. To verify the appropriateness of the present study, the ultimate strength of 58 continuous reinforced concrete deep beams tested to shear failure was evaluated by the ACI 318M-11's strut-tie model approach associated with the presented indeterminate strut-tie model and load distribution ratio. The ultimate strength of the continuous deep beams was also estimated by the experimental shear equations, conventional design codes that were based on experimental and theoretical shear strength models, and current strut-tie model design codes. The validity of the proposed strut-tie model and load distribution ratio was examined through the comparison of the strength analysis results classified according to the primary design variables. The present study associated with the indeterminate strut-tie model and load distribution ratio evaluated the ultimate strength of the continuous deep beams fairly well compared with those by other approaches. In addition, the present approach reflected the effects of the primary design variables on the ultimate strength of the continuous deep beams consistently and reasonably. The present study may provide an opportunity to help structural designers conduct the rational and practical strut-tie model design of continuous deep beams.

Library Information Service on the Web 2.0 (웹 2.0 기반의 도서관 정보서비스)

  • Yang, Byeong-Hoon
    • Journal of Information Management
    • /
    • v.39 no.1
    • /
    • pp.199-220
    • /
    • 2008
  • Most people choose Internet search engine first more than the library for their information search in these days. Many users do not know library homepage's content. How to improve the users in library homepage? This study aims to suggest the direction of library homepage service in Web 2.0. For this study the author analyzed library homepage that is introducing some representative Web 2.0 and other Web 2.0 sites. AJAX, RSS, Open API, MashUp, Wikis, Blog are the main technologies in Web 2.0. Those technologies become a tool that can do user centered library homepage. But, more important thing is information production that introduce to users. Web 2.0 suggests good information transfer for users. It needs to produce the information that stimulates the library user. It means that Web 2.0 give a good opportunity for libraries as an information production.

Finite element analysis of a injection blow molding process for the thick-walled PET bottle (후육 벽 PET 용기에 대한 사출 블로우 성형의 유한요소해석)

  • Hong, Seok-Kwan;Song, Min-Jae;Ko, Young-Bae;Cha, Baeg-Soon
    • Design & Manufacturing
    • /
    • v.12 no.3
    • /
    • pp.5-12
    • /
    • 2018
  • Plastic containers which provides the opportunity to reduce transportation costs are lighter and less brittle than glass containers. As a results, efforts to replace glass with plastic are ongoing. The blow molding method is a typical approach in producing plastic containers. Single-stage injection blow molding (ISBM) is one of the blow molding methods. However, the difficulty in controlling the temperature during the injection molding process is considered its main disadvantage. In this study, ISBM process analysis of relatively thick walled containers such as cosmetic containers is carried out. The initial temperature distribution of the preform is deemed to be the most influential factor in the accuracy of blow molding for the thick vessel. In order to accurately predict this, all heat transfer processes of the preform are considered. The validity of this analytical procedure is verified by comparing the cross-sectional thickness with the actual product. Finally, the validated analytical method is used to evaluate the factors affecting the thickness of the final molded part. The ISBM analysis technique for thick walled vessels developed through this study can be used as an effective predictor for preform design and blow process.

Economics of Literature: Transfer of 'Worth' to 'Value' (문학 경제학 -사용가치에서 교환가치로의 전이)

  • Yang, Byung-Hyun
    • Journal of English Language & Literature
    • /
    • v.55 no.5
    • /
    • pp.767-792
    • /
    • 2009
  • The two fields, economics of art and literature, tend to be put together as part of cultural economic studies; yet the former has been widely popular as compared to the latter. Economics of art has been known as part of social science which studies art economically. Similarly, economics of literature is likely to be an interdisciplinary study of literature and economics. Literature is suggested usually to reflect the economic base of a society as a form of its superstructure in view of classical Marxism; so, it is interesting to see social, economic activities, such as individual values and social institutions, income, price and opportunity cost, in a particular way of analyzing economic ideas in literature. Capital seems to have an innate property of self-expansion in literature; this property thus features actual economic life since in capitalism money is the universal value between persons and literary works. Specifically, the field of economics of literature starts with such ideas: economics of literature is part of cultural economics; and economics of literature deals with the economic value of literature. Putting interdisciplinary fields of literature and economics together, this study is to examine the economic value of literature in which Karl Marx talked about commodities with exchange value, use value, and fetishism. The exchange value is commercial worth, the actual exchange value of a publication; yet, the use value is innate worth, the aesthetic use value of literature. With commodity fetishism, profit seems not as the outcome of a social relation, but of a work- "reification" as the would-be Marxists suggest. As a commodity, the literary work appears to be able to animate life and power in reality. As a result, this paper asserts that social, economical activities in literature as we may apply to the study of economics of literature increase its economic value, implying commercial and innate worth, as the capital in the marketplace.

A study on the proposal of integrated security management of Affiliated Organizations within the Local Governments (지방자치단체 산하기관의 통합 보안관리 제안에 관한 연구)

  • Hwanju Choi;Yongsuk Park
    • Convergence Security Journal
    • /
    • v.21 no.4
    • /
    • pp.117-128
    • /
    • 2021
  • Most of the Affiliated Organizations of the Local Governments are constantly exposed to cyber threats due to the lack of dedicated information security organizations, dedicated personnel and interest from institutions. As an institution invested and contributed by the Local Government, it has the legal responsibility of management and supervision. Therefore, in this study, the network of the Local Government is connected by using the network of the Local Government, information security infrastructure, and security control infrastructure. It was an opportunity to conduct research on the improvement of the security control system of the Local Government to protect important information (personal information, etc.) owned by the Local Government. In the long term, we propose a transfer to the cloud system for stable services of personal information processing systems such as public systems, ERPs, and groupwares operated by Affiliated Organizations, and consider enhancing the security of Affiliated Organizations and security control. It is hoped that the results of this study will be helpful to the Local Governments.