• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.206-214
• /
• 2005

Heterogeneously-catalyzed oxidation of aqueous phase trichloroethylene (TCE) over supported metal oxides has been conducted to establish an approach to eliminate ppm levels of organic compounds in water. A continuous flow reactor system was designed to effect predominant reaction parameters in determining catalytic activity of the catalysts for wet TCE decomposition as a model reaction. 5 wt.% $CoO_x/TiO_2$ catalyst exhibited a transient period in activity vs. on-stream time behavior, suggesting that the surface structure of the $CoO_x$ might be altered with on-stream hours; regardless, it is probable to be the most promising catalyst. Not only could the bare support be inactive for the wet decomposition reaction at $36^{\circ}C$, but no TCE removal also occurred by the process of adsorption on $TiO_2$ surface. The catalytic activity was independent of all particle sizes used, thereby representing no mass transfer limitation in intraparticle diffusion. Very low TCE conversion appeared for $TiO_2$-supported $NiO_x$ and $CrO_x$ catalysts. Wet oxidation performance of supported Cu and Fe catalysts, obtained through an incipient wetness and ion exchange technique, was dependent primarily on the kinds of the metal oxides, in addition to the acidic solid supports and the preparation routes. 5 wt.% $FeO_x/TiO_2$ catalyst gave no activity in the oxidation reaction at $36^{\circ}C$, while 1.2 wt.% Fe-MFI was active for the wet decomposition depending on time on-stream. The noticeable difference in activity of the both catalysts suggests that the Fe oxidation states involved to catalytic redox cycle during the course of reaction play a significant role in catalyzing the wet decomposition as well as in maintaining the time on-stream activity. Based on the results of different $CoO_x$ loadings and reaction temperatures for the decomposition reaction at $36^{\circ}C$ with $CoO_x/TiO_2$, the catalyst possessed an optimal $CoO_x$ amount at which higher reaction temperatures facilitated the catalytic TCE conversion. Small amounts of the active ingredient could be dissolved by acidic leaching but such a process gave no appreciable activity loss of the $CoO_x$ catalyst.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.1
• /
• pp.24-30
• /
• 2011

BACKGROUND: High input to the arable land is contributed to increasing productivity with causing the global environmental problems at the same time. Rapeseed cultivation has been forced to reassess its positive point for utilization of winter fallow field. The Objective of this study was performed to assess the environmental impact of rapeseed cultivation with double-cropping system in paddy rice on Yeonggwang district using life cycle assessment technique. METHODS AND RESULTS: For assessing each stage of rapeseed cultivation, it was collected raw data for input materials as fertilizer and pesticide and energy consumption rate by analyzing the type of agricultural machinery and working hours by 1 ton rapeseed as functional unit. Environmental impacts were evaluated by using Eco-indicator 95 method for 8 impact categories. It was estimated that 216 kg $CO_2$-eq. for greenhouse gas, 3.98E-05 kg CFC-11-eq. for ozone lazer depletion, 1.78 kg SO2-eq. for acidification, 0.28 kg $PO_4$-eq. for eutrophication, 5.23E-03 kg Pb-eq. for heavy metals, 2.51E-05 kg B(a)p-eq. for carcinogens, 1.24 kg SPM-eq. for smog and 6,460 MJ LHV for energy resource are potentially emitted to produce 1 ton rapeseed during its whole cultivation period, respectively. It was considered that 90% of these potential came from chemical fertilizer. For the sensitivity analysis, by increasing the productivity of rapeseed by 1 ton per ha, potential environmental loading was reduced at 22%. CONCLUSION(s): Fertilization affected most dominantly to the environmental burden, originated from the preuse stage, i.e. fertilizer manufacturing and transporting. It should be included and assessed an indirect emission, which is not directly emitted from agricultural activities. Recycling resource in agriculture with reducing chemical fertilizer and breeding the high productive variety might be contribute to reduce the environmental loading for the rapeseed cultivation.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.2
• /
• pp.206-213
• /
• 2010

The aim of this study was to provide basic informations for restoring a habitat of Nannophy pygmaea Rambur. Environments and flora of the habitats were investigated in Youngdong, Sanbuk, and Nongam South Korea. The habitats were abandoned paddy fields with tree-unshaded space and with the water depths of about 2 - 10 cm all the year round. The water quality was recorded 5.44 - 7.33 in pH, 0.017 - 0.480 dS/m in EC, 1.34 - 4.94 mg/L in T-N and 0.06 - 0.46 mg/L in T-P. The pH and EC showed a wide range values, and T-N and T-P showed a high values comparatively. This result implies that a water quality does not important as the condition for a habitat of the species. A total of 86 vascular plant taxa belonging to 35 families, 60 genera, 67 species, 2 subspecies, 14 varieties and 3 forma were recognized in the habitats. Twenty two species (25.6%) overlapped among the habitats; Equisetum arvense, Salix koreensis, Persicaria thunbergii, Stellaria alsine var. undulata, Hypericum laxum, Kummerowia striata, Epilobium pyrricholophum, Oenanthe javanica, Mosla dianthera, Utricularia vulgaris var. japonica, Plantago asiatica, Eupatorium lindleyanum, Juncus diastrophanthus, J. effusus var. decipiens, J. papillosus, Aneilema keisak, Alopecurus aequalis, Arthraxon hispidus, Carex dickinsii, Cyperus sanguinolentus, Eleocharis acicularis for. longiseta and E. congesta. Biological type was determined to be HH-R5-D4-e(t) type; HH 39 taxa (45.3%), R5 42 taxa (48.8%), D4 59 taxa (68.6%) and e (or t) 23 taxa (26.7%).

• Journal of Environmental Policy
• /
• v.11 no.4
• /
• pp.39-57
• /
• 2012

Analysis of the economic impact on Korean bioindustry companies was approached after Korea access to the Nagoya Protocol on Access to Genetic Resources and the Fair and Equitable Sharing of Benefits Arising from their Utilization to the Convention on Biological Diversity (hereinafter 'the Protocol') enters into force. Cost analysis of the economic impact is based on the size of bioindustry market, dependency ratio on genetic resources abroad, ABS (Access and Benefit Sharing) ratio for royalty ratio. Korean bioindustry companies would have had to pay extra ABS cost around 1.3-6.0 billion won for using genetic resources abroad, if the Protocol had entered into force in 2009. And this cost is estimated to be around 13.6 - 63.9 billion won in 2015. All ABS costs account only about less than 0.01% of total Korean bioindustry volume of target years. These show us that joining the Protocol will not significantly impact the bioindustry market in Korea. If the Protocol enters into force, genetic resources users have to pay PIC (Prior Informed Consent) and MAT (Mutually Agreed Terms) cost before accessing the genetic resources outside of their country, regardless of the accession status of the country. This ABS costs and terms on provided genetic resources will be determined by compliance between genetic resources users and providers. As a genetic resources provider, Korean bioindustry companies will have advantage over technology transfer agreements, royalties, licensing agreements, and taxes on profits from patents including traditional knowledge. Also, Korean bioindustry companies are expected to get various socio-economic benefits such as patent litigation and regulatory proceedings as a genetic resources provider. Considering the advantages and disadvantages of the Protocol that Korean bioindustry companies will face together, the socio-economic impact of the Nagoya Protocol on Korean bioindustry companies is negligible regardless of the accession status of Korea to the Nagoya Protocol.

• Journal of Bio-Environment Control
• /
• v.24 no.2
• /
• pp.93-99
• /
• 2015

The purpose of this study was to determine the appropriate temperature for water curtain in greenhouses equipped with recirculated water curtain system. The study analyzed the changes in air temperature in non-heated greenhouses for strawberry cultivation based on outdoor temperature, water curtain temperature and night time. Three greenhouse units were used for this study: The first unit was assigned as a control (no water curtain system), two other greenhouses were equipped with recirculated water curtain system with water curtain temperatures of $10^{\circ}C$ and $15^{\circ}C$, respectively. Analysis showed that the indoor temperatures were directly correlated with the outdoor temperature in all experimental greenhouses. Heat insulating effect of $15^{\circ}C$ water curtain was increased by $1.3^{\circ}C$ compared to that in $10^{\circ}C$ water curtain system. The $15^{\circ}C$ water curtain treatment showed the highest average temperature and less temperature variation in comparison with control and $10^{\circ}C$ water curtain treatment. To maintain indoor temperature at $5^{\circ}C$, water curtain temperature of $10^{\circ}C$ was suitable when outdoor minimum and average temperatures were -1.3 and $1.5^{\circ}C$, and water curtain temperature of $15^{\circ}C$ was suitable when outdoor minimum and average temperatures were -4.7 and $-0.2^{\circ}C$, respectively. The highest temperature in greenhouses according to measurements in different periods of night time was observed after sunset (18:30-20:30), and the lowest temperature before sunrise (05:00-07:00). Water curtain maintained a target indoor temperature by acting as a layer of heat transfer insulator which decreased heat loss from greenhouses. Therefore, water temperature in recirculating water curtain systems should be determined by considering outdoor temperatures, changes in temperature at different periods of night time, and cultivated crop.

• The KIPS Transactions:PartC
• /
• v.10C no.5
• /
• pp.625-634
• /
• 2003

More than a decade after its initial proposal, deployment of IP Multicast has been limited due to the problem of traffic control in multicast routing, multicast address allocation in global internet, reliable multicast transport techniques etc. Lately, according to increase of multicast application service such as internet broadcast, real time security information service etc., overlay multicast is developed as a new internet multicast technology. In this paper, we describe an overlay multicast protocol and propose fast join mechanism that considers switching of the tree. To find a potential parent, an existing search algorithm descends the tree from the root by one level at a time, and it causes long joining latency. Also, it is try to select the nearest node as a potential parent. However, it can't select the nearest node by the degree limit of the node. As a result, the generated tree has low efficiency. To reduce long joining latency and improve the efficiency of the tree, we propose searching two levels of the tree at a time. This method forwards joining request message to own children node. So, at ordinary times, there is no overhead to keep the tree. But the joining request came, the increasing number of searching messages will reduce a long joining latency. Also searching more nodes will be helpful to construct more efficient trees. In order to evaluate the performance of our fast join mechanism, we measure the metrics such as the search latency and the number of searched node and the number of switching by the number of members and degree limit. The simulation results show that the performance of our mechanism is superior to that of the existing mechanism.

• Journal of Plant Biotechnology
• /
• v.32 no.2
• /
• pp.117-121
• /
• 2005

Immature embryos of 3 cultivars (Du Me Chal, Mi Baek Chal, Heug Jeom Chal) and 5 genotypes (HW1, KL103, HW3, HW4, KW7) were cultured on medium containing MS salts, Eriksson's vitamins, 1 mg/L 2,4-dichlorophenoxyacetic acid, 25 mM proline, 100 mg/L casamino acid, 3 mM MES, 1.7 mg/L $AgNO_3$ and 20 g/L sucrose (SIM). Frequency of somatic embryo formation on explant of immature embryos showed in HW1 (45.20%), KL103 (5.75%), HW3 (37.20%), HW4 (30.10%), KW70 (55.20%), Mi Baek Chal (18.74%), Heug Jeom Chal (22.41%), Du Me Chal (36.72%) and Hi II type (<10%), respectively. Yellowish friable embryogenic callus (YFEC) such as type II callus of Hi II genotype only produced from the HW3 and Heug Jeom Chal, whereas other cultivars and genotypes were directly formed somatic embryos with late-embryonic stages or expanded yellowish compact somatic embryo with morphological abnormality. The yellowish friable embryogenic callus (YFEC) could be proliferated on the same medium, which were maintained embryogenic capacity for 6 months over. Upon transfer to first regeneration and second regeneration medium, somatic embryos converted to plantlets at a frequency of approximately 100%. However, the expanded somatic embryos with abnormal morphology were slowly proliferated when subcultured on the same medium, and some of them were degenerated or converted to plantlets at a frequency of approximately 25%. Accordingly, The Heug Jeom Chal and HW3 genotype will be further used for development of high frequency transformation system in domestic maize germplasm.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.1
• /
• pp.161-174
• /
• 1997

Omega-3 fatty acids have been major research interests in medical and nutritional science relating to life sciences since after the epidemiologic data on Green3and Eskimos reported by several researchers clearly showed fewer per capita deaths from heart diseases and a lower incidence of adult diseases. Linolenic acid(LNA) is an essential fatty acid for human beings as well as linoleic acid(LA) due to the fact that vertebrates lack an enzyme required to incorporate a double bond beyond carbon 9 in the chain. In addition the ratio of omega-6 and 3 fatty acids seems to be important in terms of alleviation of heart diseases since LA and LNA competes for the metabolic pathways of eicosanoids synthesis. High consumption of omega-3 fatty acids in seafoods may control heart diseases by reducing blood cholesterol, triglyceride, VLDL, LDL and increasing HDL and by inhibiting plaque development through the formation of antiaggregatory substances like PGI$_2$, PGI$_3$ and TXA$_3$ metabolized from LNA. Omega 3 fatty acids also play an important role in neuronal developments and visual functioning, in turn influence learning behaviors. Current dietary sources of omega-3 fatty acids are limited mostly to seafoods, leafy vegetables, marine and some seed oils and the most appropriate way to provide omega-3 fatty acids is as a part of the normal dietary regimen. The efforts to enhance the intake of omega-3 fatty acids due to several beneficial effects have been made nowadays by way of food processing technology. Two different ways can be applied: one is add Purified and concentrated omega-3 fatty acids into foods and the other is to produce foods with high amounts of omega-3 fatty acids by raising animals with specially formulated feed best for the transfer of omega-3 fatty acids. Recently, items of manufactured and marketed omega-3 fatty acids fortified foodstuffs are pork, milk, cheese, egg, formula milk and ham. In domestic food market, many of them are distributed already, but problem is that nutritional informations on the amounts of omega-3 fatty acids are not presented on the labeling, which might cause distrust of consumers on those products, result in lower sales volumes. It would be very much wise if we consume natural products, result in lower sales volumes. It would be very much wise if we consume natural products high in omega-3 fatty acids to Promote health related to many types of adult diseases rather than processed foods fortified with omega-3 fatty acids.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.345-359
• /
• 2002

The purpose of the study was to provide the fundamental data to instruct athletes through the analysis athletes' movement in javelin. Three athletes in the level of national representative were participated in this study. The study analyzed kinematic variables(lead foot and releasing javelin) through 3-D analysis and obtained the following results. 1. During withdrawal, it is important to maintain of running horizontal velocity. 2. It was showed that throng average height was $84{\pm}3.3%$ and javelin adequative degree, Among the athletes, $S_2$ who had the best record was released the javelin with the fast velocity, but throw the javelin with the less releasing velocity. 3. $S_2$ released after lead foot were completely landed and therefore it is no problem in a kinematic aspect. However, $S_1$ angle was too small. it caused increase of release velocity to be prevented. 4. $S_2$ showing the best result indicated shorter in duration time. Generally, the shorter duration time in release phase showed the longer release distance. Especially $S_1$ and $S_3$ showing the worse result indicated the longer duration time in preparatory phase, causing the breakup of force. Therefore to improve the record, it should be decreased the duration time in preparatory phase. 5. Compared with $S_1$ and $S_3$, $S_2$ showing the best record indicated the higher velocity in center of mass, trunk, upper arm, lower arm and hand That is the higher velocity of upper arm at release leaded the better velocity transfer from upper arm to following lower arm and hand, these action should be considered to be helpful of better record. According to the above conclusion, when the athletic leaders cauch athletes, they should focus on maintaining knee angle, upper body and hip angle in a previous stage of release and throwing angle, throwing height, throwing velocity in a release stage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.463-466
• /
• 2017

The purpose of this paper is to develop a module capable of all-directional driving different from conventional wheeled robots, and to solve the problems of the conventional mobile robot with side driving performance degradation, It is possible to overcome the disadvantages such as an increase in the time required for the unnecessary driving. The all - direction spherical wheel drive module for driving a ball - balancing robot is required to develop a power transfer mechanism and a driving algorithm for driving the robot in all directions using three rotor casters. 3DoF (Axis) A driver with built-in forward motion algorithm is embedded in the module and a driving motor module with 3DoF (axis) for driving direction and speed is installed. The movement mechanism depends on the sum of the rotation vectors of the respective driving wheels. It is possible to create various movement directions depending on the rotation and the vector sum of two or three drive wheels. It is possible to move in different directions according to the rotation vector field of each driving wheel. When a more innovative all-round spherical wheel drive module for forward movement is developed, it can be used in the driving part of the mobile robot to improve the performance of the robot more technically, and through the forward-direction robot platform with the drive module Conventional wheeled robots can overcome the disadvantage that the continuous straightening performance is lowered due to resistance to various environments. Therefore, it is necessary to use a full-direction driving function as well as a cleaning robot and a mobile robot applicable in the Americas and Europe It will be an essential technology for guide robots, boarding robots, mobile means, etc., and will contribute to the expansion of the intelligent service robot market and future automobile market.