• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.355-364
• /
• 2010

A session transfer method, referred to as a Recipient Serving-call session control function (S-CSCF) Assured (RSA), is proposed in order to support both session mobility and consistency in IP multimedia subsystem (IMS) based next generation network (NGN). RSA session transfer simplifies a basic session transfer operation specified in [1] by using the user agent client (UAC) like characteristics of an S-CSCF. To show its efficiency, the session transfer delay and the traffic cost of RSA session transfer are investigated and compared with those of existing session transfer applications, including Assured and Consultative session transfers, by practically considering multiple session transfer failures. It is shown that RSA session transfer can further improve user experience by reducing session transfer delay as well as traffic cost than Assured and Consultative session transfers.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.138-143
• /
• 2005

Finite Element analysis is widely applied to elevated temperature forging processes and shows a lot of information of plastic deformation such as strain, stress, defects, damages and temperature distributions. In highly elevated temperature deformation processes, temperature of material and tool have significant influence on tool life, deformation conditions and productivities. To predict temperature related properties accurately, adequate coefficients of not only contact heat transfer between material and dies but also convection heat transfer due to coolants are required. In most F.E analysis, too higher value of contact heat transfer coefficient is usually applied to get acceptable temperature distribution of tool. For contact heat transfer coefficients between die and workpiece, accurate values were evaluated with different pressure and lubricants conditions. But convection heat transfer coefficients have not been investigated for forging lubricants. In this research, convection heat transfer coefficients for cooling by emulsion lubricants are suggested by experiment and Inverse method. To verify acquired convection and contact heat transfer coefficients, tool temperature was measured for the comparison between measured tool temperature and analysis results. To increase analysis accuracy, repeated analysis scheme was applied till temperature of the tool got to be in the steady-state conditions. Verification of heat transfer coefficients both contact and convection heat transfer coefficients was proven with good accordance between measurement and analysis.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.937-940
• /
• 2004

• Journal of Digital Convergence
• /
• v.16 no.8
• /
• pp.129-136
• /
• 2018

This study analyzed technology application field and technology transfer type related to the 4th industrial revolution using frequency, visualization, and association analysis of text mining of Big Data. The analysis was conducted between the last three years (2015 - 2017) registered with the NTB of KIAT transfer technology database was utilized. As a result of analysis, First, First, transfer technologies called core technologies of the Fourth Industrial Revolution are a lot of about robots, 3D, autonomous driving, and wearables. Second, as the year go by, transfer technolgy registration such as IoT, Cloud, VR is increasing. Third, the results of the association analysis of technology transfer type are as follows. IoT and VR showed preference for technology trading and licensing, autonomous driving technology trading, wearable licensing, robots preferring technology cooperation, licensing, and technology trading.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.4
• /
• pp.1055-1089
• /
• 2013

These days, the environment surrounding university has been changing rapidly and largely. Especially, the academic entrepreneurship for university spin-offs and wealth creation is being emphasized. And therefore, the importance of industry-academy-research institute cooperation for technology transfer and commercialization is increasing more and more. According to that, government have made various legal system and support the university activities for their autonomous and practical technology use, and one of that core means is to make university establish the special organization for technology transfer and commercialization, and support its activities systematically. This paper aims to study legal system on the special organization for university technology transfer and commercialization in korea. Especially, it is layed emphasis to search the problems and find out the improvement ways about the special organization. For this purpose, the legal system and necessity of special organization in university and other research institute are reviewed in domestic and abroad, the type and operation methodology of special organization in the existing laws are investigated in korea, the operation effects of several organization are analyzed, and lastly the improvement methods for activating the organization are studied and suggested.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.1
• /
• pp.105-114
• /
• 2015

An empirical analysis study applied to evaluate the effect of critical factors for technology transfer. The research aims to suggest ways of political support in order to facilitate technological transfer and commercialization of public research institute'technology. Based on previous researches, it is determined that five critical factors which effect on technology commercialization. These critical factors are used to derive the order of priority, attribute of the success, and failure factors. The result of this research emphasized on both roles of technology introduction motivation and type of technology transfer. In order to collect data for this research, it is carried out that survey and field study toward to technology user such as manufacturing companies which have contracted with institute A. This research has a meaning in aspects of verification of previous hypothesis through scientific approach and new findings of a significant factor that motivation determines the success or failure of technology commercialization.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.161-161
• /
• 2000

The clean mobile robot for wafer transfer is AGV that carry each wafer to each equipment. It has wafer handling technology, wafer ID recognition technology, position calibration technology using vision system, and anti-vibration technology. Wafer loading/unloading working accuracy is within ${\pm}$1mm, ${\pm}$3$^{\circ}$. By application of this AGV, we can reduce the manufacturing tack time and bring cost down of equipment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.635-642
• /
• 2010

Experimental investigations have been carried out to examine the evaporative heat transfer characteristics of R-134a with the channel-bending angle (CBA) in microchannel heat exchangers. In this study, we examined the effects of evaporation temperature and Reynolds number of R-134a on the evaporative heat transfer characteristics of R-134a in microchannel heat exchangers with CBAs of $120^{\circ}$, $150^{\circ}$, and $180^{\circ}$ under counterflow conditions. Experimental results show that the evaporative heat transfer rate and evaporative heat transfer coefficient increased with an increase in the Reynolds number of R-134a. Further, the evaporative heat transfer rate corresponding to CBAs of $120^{\circ}$ and $150^{\circ}$ increased to values greater than the evaporative heat transfer rate corresponding to $180^{\circ}$ by approximately 17.1% and 13.3%, respectively, for evaporating temperatures in the range $4.9-14.9^{\circ}C$. The evaporative heat transfer coefficient was affected by the channel angle with increasing evaporative heat transfer coefficient at small channel bending angle.

• Information Systems Review
• /
• v.6 no.1
• /
• pp.123-139
• /
• 2004

It is needed to transfer the technology actively which has already developed to improve a up-to-date technology and foster the technological innovation. The technology transfer also can bring about a commercial success. To promote the technology transfer, it is needed to develop a new technology valuation model for a specific technology from a objective point of view, as well as to equip an institution such as the technology transfer center. The technology valuation from a objective point of view is of importance as the basic information for the price negotiation between a technology-buyer and a technology-seller. This paper takes aim at investigating a new technology valuation model and developing a technology valuation system for promoting the technology transfer. A new technology valuation system is developed as a Web-enabling base. Using this users are able to estimate the value of a specific technology on a real time efficiently.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.5
• /
• pp.261-272
• /
• 2022

Agriculture and the rural sector play a crucial part in Vietnam's socio-economic growth. The study's goal is to see how technology transfer from young intellectual research activities affects the economic evolution of Vietnam's agriculture and rural sector in the 4.0 technology era. The research has used a quantitative method through analysis of linear structural model SEM, with a survey scale including 480 samples that are managers in departments and branches in agriculture and rural sector in the provinces in Vietnam. Research results show that technology transfer from research activities of the young intellectual has a direct and positive impact on economic development in agriculture and rural sector. This level of impact will increase with the participation of the intermediary factors such as awareness of managers, trust, and mechanisms in the mobilization and use of resources. These results contribute to both theoretical and practical aspects when proving the impact of technology transfer from the research activity of the young intellectual to the economic development in the field of agriculture and rural sector in the 4.0 era and the mediating role of awareness of managers, trust and mechanisms in the mobilization and use of resources.