사료 내 매리골드 추출물의 첨가 급여가 계란 생산성과 계란 품질 및 난황 내 루테인 함량에 미치는 영향 (The Dietary Effects of Marigold Extracts on Egg Production, Egg Quality and the Production of Lutein Fortified Chicken Eggs)
-
- 한국가금학회지
- /
- 제41권2호
- /
- pp.135-142
- /
- 2014
본 실험에서는 매리골드 추출물의 첨가 수준별 급여가 산란계에서 난 생산성, 난질 및 계란의 보존성 및 난황 내 루테인 함량에 미치는 영향을 조사하였다. 55주령의 Hy-Line 갈색계 189수를 공시하여 모두 7개 처리구에 3반복 반복당 9수씩 완전임의 배치하였으며, 총 6주간 사양 실험을 실시하였다. 옥수수와 대두박 위주의 시판 사료를 급여하는 대조구와 매리골드 추출물을 각각 0.1%, 0.3%, 0.5%, 1.0%, 1.5%, 2.0% 수준으로 첨가한 실험구로 구분하였다. 실험 기간 중의 사료 섭취량, 산란율, 난중 및 일산란량을 조사하였고, 주별로 수집한 계란의 난질 및 난각질을 평가하였으며, 실험 마지막 주에 생산된 계란은 시간 경과별 Haugh unit의 변화와 난황 내 MDA 농도를 측정함으로써 계란의 보존성 평가를 위한 시료로 사용하였다. 사료 섭취량에 있어 각 처리구간 큰 차이가 없었고, 이는 매리골드 추출물이 산란계의 기호성에 미치는 영향이 없었음을 보여준다. 산란율에서는 처리간에 유의차가 인정되는 큰 차이가 없었지만, 매리골드 추출물을 첨가한 모든 처리구에서 대조구보다 높은 경향이 관찰되었다. 난중은 대조구에 비해 매리골드 추출물을 첨가한 처리구에서 증가하는 경향이 있었지만 유의차는 없었다. 일산란량에서는 매리골드 추출물을 0.5% 첨가한 처리구를 제외한 모든 처리구가 대조구에 비해 상대적으로 높았지만, 처리구간 유의차는 없었다. 난질 및 난각질에 미치는 영향 중 난각 강도와 난각 두께에서는 처리구간 큰 차이가 없었다. 난황색은 매리골드 첨가수준에 따라 유의차 있게 개선되는 것을 확인할 수 있었다(p<0.05). Haugh unit에서는 매리골드 추출물을 0.1%, 0.3%, 0.5% 첨가한 처리구가 대조구에 비해 유의차 있는 높은 수치를 보여 주었다(p<0.05). 매리골드 추출물의 수준별 급여가 시간 경과별 Haugh unit의 변화와 난황 내 MDA 농도에 미치는 영향에서, 보존 7일째에 조사한 Haugh unit에서는 유의차가 없었지만 모든 처리구가 대조구에 비해 수치가 높았고, 14일째에 조사한 Haugh unit에서는 대조구에 비해 매리골드 추출물을 0.3%, 1.0% 첨가한 처리구의 값이 유의차 있게 개선되는 경향을 보여주었다(p<0.05). 난황 MDA 농도는 대조구에 비해 매리골드 추출물을 0.5% 이상 첨가한 모든 실험구에서 유의하게 감소하는 결과가 관찰되었다(p<0.05). 난황 내 루테인 함량은 매리골드 추출물의 0.5% 이상 첨가한 처리구에서 매리골드 추출물의 첨가량에 비례하여 유의하게 증가하였다(p<0.05). 이는 매리골드 추출물에 함유되어 있는 루테인 성분이 계란 내에 순조롭게 이행되었다는 것을 뜻하며, 계란 무게를 60 g으로 환산하면, 매리골드 추출물을 2% 급여하였을 때 난황 내 lutein 함량이 최대 1.71 mg/60 g까지 증가함을 알 수 있다. 산란계 사료에 있어 매리골드 추출물의 다량 첨가는 산란율을 비롯한 생산성에 부정적인 영향을 미치지 않았고, 난황색 및 신선도를 포함한 난질 개선 효과가 있었으며, 계란의 유통 및 저장 기간 동안의 신선도 유지와 계란 내 지질 산화를 억제하는 효과가 있으며, 매리골드 추출물의 첨가 수준에 따라 난황 내 루테인 함량이 증가함을 확인할 수 있었다.
In 1997 when cloned sheep Dolly and soon after Polly were born, it had become head-line news because in the former the nucleus that gave rise to the lamb came from cells of six-year-old adult sheep and in the latter case a foreign gene was inserted into the donor nucleus to make the cloned sheep produce human protein, factor IX, in e milk. In the last few years, once the realm of science fiction, cloned mammals especially in livestock have become almost commonplace. What the press accounts often fail to convey, however, is that behind every success lie hundreds of failures. Many of the nuclear-transferred egg cells fail to undergo normal cell divisions. Even when an embryo does successfully implant in the womb, pregnancy often ends in miscarriage. A significant fraction of the animals that are born die shortly after birth and some of those that survived have serious developmental abnormalities. Efficiency remains at less than one % out of some hundred attempts to clone an animal. These facts show that something is fundamentally wrong and enormous hurdles must be overcome before cloning becomes practical. Cloning researchers now tent to put aside their effort to create live animals in order to probe the fundamental questions on cell biology including stem cells, the questions of whether the hereditary material in the nucleus of each cell remains intact throughout development, and how transferred nucleus is reprogrammed exactly like the zygotic nucleus. Stem cells are defined as those cells which can divide to produce a daughter cell like themselves (self-renewal) as well as a daughter cell that will give rise to specific differentiated cells (cell-differentiation). Multicellular organisms are formed from a single totipotent stem cell commonly called fertilized egg or zygote. As this cell and its progeny undergo cell divisions the potency of the stem cells in each tissue and organ become gradually restricted in the order of totipotent, pluripotent, and multipotent. The differentiation potential of multipotent stem cells in each tissue has been thought to be limited to cell lineages present in the organ from which they were derived. Recent studies, however, revealed that multipotent stem cells derived from adult tissues have much wider differentiation potential than was previously thought. These cells can differentiate into developmentally unrelated cell types, such as nerve stem cell into blood cells or muscle stem cell into brain cells. Neural stem cells isolated from the adult forebrain were recently shown to be capable of repopulating the hematopoietic system and produce blood cells in irradiated condition. In plants although the term
우리나라에서 토양(土壤) 온도(溫度)를 정규적으로 관측(觀測)하고 있는 기상청(氣象廳) 산하(傘下) 기상대(氣象臺) 및 관측소(觀測所) 관측(觀測) 노장(露長)의 토양시료(土壤試料)를 채취(採取)하여 토양(土壤)의 열전도(熱傳度) 특성(特性)과 관련이 깊은 토양(土壤)의 용적밀도(容積密度), 토성(土性), 유기물(有機物) 함량(含量) 등 물리적(物理的) 특질(特質)을 분석(分析)하였으며, 토양(土壤)의 열확산(熱擴散) 계수(係數)를 산출(算出)하였다. 기상청(氣象廳) 산하(傘下) 기상대(氣象臺) 및 관측소(觀測所) 토양(土壤)의 물리적(物理的) 특성(特性)을 조사한 결과(結果) 0-10cm의 표토(表土)는 52%가 사양토(砂壤土)였으며, 양토(壤土)와 미사질양토(微砂質壤土)가 38%, 그리고 식양토(埴壤土) 및 미사질식토(微砂質埴土)가 10%이었다. 이들 토양(土壤)의 열특성(熱特性)과 관계가 깊은 용적밀도(容積密度)는 사토(砂土)가
회동저수지의 호저퇴적물에 대하여 미량원소의 심도별 변화와 존재형태 및 이들의 상관관계에 대해서 알아보고자 하였다. 회동저수지의 5개 지점에서 깊이 21-41cm의 코어와 간극수를 채취하였다. 회동저수지 퇴적물 내 미량원소의 평균 총함량은 Zn
순환식 수막시스템의 적정 수온을 결정하는데 필요한 기초자료를 제공하기 위하여 딸기를 토경재배하고 있는 실험온실에서 외부온도, 수막용수의 수온 및 야간시간대에 따른 처리방식별 온실 내부 환경변화를 비교 분석하였다. 대조구는 무수막 온실이고, 처리구는 수온이
동해에서의 해양-대기 열교환량을 1961년부터 1990년까지의 선상관측자료와 1976 년부터 1985년까지의 일본기상처 부표자료를 이용하여 구하였다. 그리고 이 결과와 해 양상층부 200m 내의 열용량의 계절변화로부터 해양내부의 열유동량을 계산하였다. 겨 울에는 유입되는 단과복사량과 방출되는 장파오복사량의 크기가 비슷해 복사에 의한 열방출량은 적지만 열속과 자멸속이 강하여 전 해역에서 대기로 많은 열량을 방출한 다. 유효열방출량의 공간적인 변화폭은 100 Wm/SUP -2/이상이며, 최대의 열방출량은 쓰가루해협 부근에서 일어나고 대한해협과 울릉분지역등 남부역이 높은 방출량이 나타 난다. 특히 남서 해역의 강한 열방출이 겨울에 동해 중층균실수의 형성에 영향을 주는 것으로 보인다. 여름에는 강한 태양복사와 낮은 난류속의 영향으로 전해역에서 120~ 140 Wm/SUP -2/의 비슷한 크기로 해양이 가열된다. 해양내부의 열유동은 일본연안에서 양의 값을 나타내 여름의 강한 대마난류에 의한 열량의 유입을 보이며, 그 크기는 해 면을 통해 흡수한 열량보다 커서 여름에는 대마난류에 의한 열유입이 중요함을 보여준 다. 한국연안에서는 음의 값으로 수온이 낮은 북한 한류계수의 남하를 나타낸다. 봄과 가을은 3월과 100월에 각각 최소, 최대를 나타낸다. 유효열교환량의 연변화폭은 남서 해역의 경우 약 580 Wm/SUP -2/이다. 해표면을 통한 연평균 유효열교환량은 모든 해역 에서 음의 값으로 대기중으로 열량을 방출하며, 그 크기는 쓰가루해협부근에서 -130 Wm/SUP -2/로 강하고 대한해협과 울릉분지역에서도 이웃하는 해역보다 많은 열량을 방 출한다. 위도 35
Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.
이 연구에서는 전기화학적 임피던스분광법(Electrochemical Impedance Spectroscopy, EIS)을 활용하여 콘크리트 속 철근 부식의 개시, 전파 및 이로 인한 콘크리트의 손상을 관찰하기 위한 실험을 수행하였다. 먼저, 직경 25mm, 높이 70mm 원주형 콘크리트 실험체 중심에 지름 5mm의 탄소강봉을 매입한 실험체를 제작하였다. 실험체에 사용된 콘크리트는 물-시멘트 비 0.4, 0.5, 0.6을 갖는 세 가지 배합을 제작하였다. 촉진부식시험을 수행하여 위하여 철근 콘크리트 실험체는 0.5M NaCl 수용액에 침지한 후 0C, 13C, 65C, 130C의 네 가지 수준의 전하량을 인가하였다. 이 연구에서는 부식촉진 및 이 과정에서 EIS의 주기적 모니터링을 자동화하여 실험의 효율을 향상시켰다. 이 연구의 실험 결과를 통하여 EIS 주요 특성인자를 활용하여 콘크리트 속 철근의 부식상태를 효과적으로 평가할 수 있음을 확인하였다. 전하이동저항(Rc)값은 전하인가량이 0C에서 13C로 증가함에 따라 급격히 감소하여 대략 10kΩcm2 값을 나타내었다. 하지만 부식개시 이후 전하인가량을 13C에서 130C로 증가하였을 때 Rc값의 민감도는 현저히 감소하는 것을 확인하였다. 한편 이중층용량값(Cdl)값은 전하인가량이 0C에서 130C로 증가함에 따라 대략 50×10-6μF/cm2 에서 250×10-6μF/cm2 수준으로 선형비례관계를 보였다. 이러한 결과는 Cdl 모니터링을 통하여 부식물질에 팽창에 따라 유발된 콘크리트 내부 손상의 진전을 효과적으로 평가할 수 있음을 보여준다. 이 연구의 결과는 EIS를 활용하여 콘크리트 속 철근 부식의 확산 및 이에 따른 콘크리트 손상의 실시간 모니터링을 위한 매입형 센서 및 EIS 신호 분석방법의 고도화를 위한 기본 데이터를 제공하는데 의미가 있다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70