• 제목/요약/키워드: Transfer efficiency

검색결과 2,728건 처리시간 0.028초

시설하우스 에너지 절감을 위한 열유동 수치 해석 심층 연구 (Indepth Study of Numerical Heat Transfer and Fluid Flow for Energy Saving of Greenhouse)

  • 신미수;김혜숙;최준호;장동순
    • 대한환경공학회지
    • /
    • 제29권4호
    • /
    • pp.466-471
    • /
    • 2007
  • 본 연구의 목적은 시설하우스에 대한 기본적이면서도 중요한 운전 자료를 얻기 위한 것이다. 특히 시설하우스 에너지 절감을 위해 실용적으로 쉽게 적용할 수 있는 방법에 중점을 두었다. 이러한 목적에 의해 하우스내의 온도분포를 평가하기 위한 방법으로 조직적인 수치해석연구를 수행하였다. 이러한 연구에서 고려한 중요한 변수는 시설하우스의 일반적인 형상과 함께 시설하우스내의 열유동을 조절하는 다양한 배플 조건을 가정하였다. 아울러 난방가열시스템의 배관배치에 따른 열유동 특성과 효율을 상호 비교하였다. 이러한 연구의 결과로 얻어진 몇 가지의 유용한 결론을 정리하였다. 특히 시설하우스 천장에서 내린 배플은 최소한의 시설로서 에너지 효율에 실질적인 기여를 할 수 있었으며 또한 난방배관의 구조는 시설하우스내의 균일한 온도 분포을 얻기 위하여 크게 영향을 미치고 있음을 확인하였다. 기타 본연구의 여러 수치해석 결과들은 물리적인 면에서 의미가 있었으며 실용적인 면에서 시설하우스의 최적 운전조건의 설정에 도움이 된다고 판단하였다.

우 수정란의 배양세포들로부터 송아지 생산을 위한 체계 (Systems for Production of Calves from Cultured Bovine Embryonic Cells)

  • 박세필;;정길생;이훈택;윤산현;임진호
    • 한국가축번식학회지
    • /
    • 제18권4호
    • /
    • pp.299-307
    • /
    • 1995
  • 전능성을 지닌 우 수정란 세포배양기술 체계 확립은 가축육종에 중요한 의의를 지닌다. 이러한 체계는 1) 핵치환에 의한 다수의 클론동물 생산에 대한 기전, 2) 형질전환세포를 선발하기 위한 marker의 사용으로 효과적인 유전자 전이체계와 3) site specific 유전자 전이에 대한 기전 또는 homologous DNA서열 재조합에 의한 결손 등에 대한 기전을 이해하는데 이용될 수 있다. 우 수정란세포의 배양은 배반포 내부 세포괴, 상실배와 16∼20세포기로부터 확립하였다. 이들 모든 세포들은 생쥐 배아간 세포형태와 유사하였으며 배양시 분화와 증식에서 다능성을 나타내었다. 배양체계는 미세소적이나 배양용기, 우 도는 설치류 섬유아 세포주를 단기간 배양 또는 장기간 배양방법을 이용하였다. 유사분열시 요구되는 배양체계나 배양액 그리고 분화 억제에 대한 괄목할만한 장점은 아직 밝혀지지 않고 있다. 현재 16∼20 세포기의 배양세포의 전능성에 대해서는 알려져 있지 않다. 배양된 ICM세포 전능성은 27일간 배양한 ICM 세포로부터 4마리의 산자 생산에 의해 입증되었다.

  • PDF

돼지에 있어서 정소 생식세포의 이식 기법 개발 (Development of Techniques for Testicular Germ Cell Transplantation in Pigs)

  • 김병각;이용안;김방진;김기중;민관식;이장희;유재원;김인철;류범용
    • Reproductive and Developmental Biology
    • /
    • 제32권3호
    • /
    • pp.193-198
    • /
    • 2008
  • 본 연구는 돼지에 있어서 정원줄기세포를 포함하는 정소세포를 recipient 돼지의 정소 내로 이식할 수 있는 기법을 개발하기 위하여 시행되었다. 공여세포는 $10{\sim}14$일령의 돼지로부터 채취된 정소에서 효소처리법을 이용하여 회수하였고, recipient의 정소 내로 이식하기 전 형광 마커(PHK26)로 표지하였다. 외과적 수술을 통하여 recipient 돼지부터 정소를 꺼낸 후 초음파 기기와 이식 장치를 이용하여 형광표지된 공여세포를 recipient 정소의 세정관 내로 이식하였다. 14주령의 recipient 정소에 $5{\sim}7ml$의 공여 세포부유액을 주입하여 정소 내 50% 이상의 세정관 내로 새포부유액의 주입이 가능하였고, 세포부유액이 주입된 세정관 내에서 형광표지된 정소세포들이 고루 이식되어짐이 관찰되었다. 본 연구에서 개발한 이식 기법을 이용하여 효율적인 정소세포의 이식이 가능함에 따라 향후 돼지 정원줄기세포의 연구 및 활용법 개발에 획기적인 돌파구가 마련될 것으로 기대된다.

지하수 부존지역에서 최적 지열에너지 활용방식 수치 모의 (Numerical Simulations for Optimal Utilization of Geothermal Energy under Groundwater-bearing Conditions)

  • 김진성;차장환;송성호;정교철
    • 지질공학
    • /
    • 제24권4호
    • /
    • pp.487-499
    • /
    • 2014
  • 최근 지열에너지 활용 증가 추세와 더불어 지하수 부존량이 풍부한 지역에서 수직개방형의 효율이 더 높다는 연구결과가 제시됨에도 불구하고, 국내 지열냉난방시스템의 열교환 방식은 수직밀폐형 방식이 주를 이루고 있다. 따라서, 본 연구에서는 지하수 부존량이 풍부한 지역에서 수직개방형 방식의 효율성을 검증하기 위하여, 수리지질 및 열적 특성을 반영한 최적의 지열에너지 활용 방식을 수치 모의하였다. 1차 모의 결과, 지하수 부존량이 풍부한 지역에서 지열냉난방시스템을 활용하는 경우 수직밀폐형보다 지하수를 직접 이용하는 수직개방형이 더욱 효과적인 것으로 분석되었으며, 수직개방형 중에서는 SCW (standing column well)형 보다는 주입정과 추출정이 분리된 복수관정형에서 지반과 열교환을 통해 얻을 수 있는 주입수와 추출수의 온도차 (${\Delta}$)가 커 더욱 효율적인 것으로 나타났다. 2차 모의에서는 수직개방형 지열에너지 공급방식인 단일관정형, SCW형, 복수관정형을 대상으로 열 이송, 이격거리 및 유량, 지하수 수리경사 등을 고려한 최적의 활용 방식을 검토하였으며, 이를 바탕으로 지열냉난방시스템의 지중 열교환 방식 선정 시 활용할 수 있는 흐름도를 제시하였다. 본 연구결과 제시된 다양한 선정 기준을 기초로 실제 선정 시에는 전체 지열냉난방 시스템에 대한 COP (coefficient of performance) 계산 및 세부적인 타당성 검토가 필요할 것으로 판단된다.

보험진료체계 개편의 효과에 대한 연구 (An Evaluative Analysis of the Referral System for Insurance Patients)

  • 한달선;김병익;이영조;배상수;권순호
    • Journal of Preventive Medicine and Public Health
    • /
    • 제24권4호
    • /
    • pp.485-495
    • /
    • 1991
  • This study examined the effects of referral requirements for insurance patients which have been enforced since July 1, 1989 when medical insurance coverage was extended to the whole population except beneficiaries of medical assistance program. The requirements are mainly aimed at discouraging the use of tertiary care hospitals by imposing restrictions on the patient's choice of a medical service facility. The expectation is that such change in the pattern of medical care utilization would produce several desirable effects including increased efficiency in patient care and balanced development of various types of medical service facilities. In this study, these effects were assessed by the change in the number of out-patient visits and bed-days per illness episode and the share of each type of facility in the volume of services and the amount of expenditures after the implementation of the new referral system. The data for analysis were obtained from the claims to the insurance for government and school employees. The sample was drawn from the claims for the patients treated during the first six months of 1989, prior to the enforcement of referral requirements, and those of the patients treated during the first six months of 1990, after the enforcement. The 1989 sample included 299,824 claims (3.6% of total) and the 1990 sample included 332,131 (3.7% of total). The data were processed to make the unit of analysis an illness episode instead of an insurance claim. The facilities and types of care utilized for a given illness episode are defined to make up the pathway of medical care utilization. This pathway was conceived of as a Markov Chain process for further analysis. The conclusion emerged from the analysis is that the enforcement of referral requirements resulted in less use of tertiary care hospitals, and thereby decreased the volume of services and the amount of insurance expenses per illness episode. However, there are a few points that have to be taken into account in relation to the conclusion. The new referral system is likely to increase the use of medical services not covered by insurance, so that its impact on national health expenditures would be different from that on insurance expenditures. The extension of insurance coverage must have inereased patient load for all types of medical service organizations, and this increase may be partly responsible for producing the effects attributed to the new referral system. For example, excessive patient load for tertiary care hospitals may lead to the transfer of their patients to other types of facilities. Another point is that the data for this study correspond to very early phase of the new system. But both patients and medical care providers would adapt themselves to the new system to avoid or overcome its disadvantages for them, so as that its effects could change over time. Therefore, it is still necessary to closely monitor the impact of the referral requirements.

  • PDF

응급환자의 방사선영상검사 분포 및 Patient Care (The Distribution and Patient Care in Radiography for Emergency Outpatients)

  • 이환형;강원한
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제19권1호
    • /
    • pp.55-74
    • /
    • 1996
  • This study was carried out to improve service efficiency and to cope with a emergency situation in emergency radiography, through analysis of the radiographic distribution and literature cited about emergency care. Data collection of radiographic distribution was surveyed for 761 emergency outpatients who visit during JAN, 1994 at ER of the general hospital in Pusan city. The results is as follows: Emergency radiography rate of simple radiography was 61.1 %, special radiography 2.5 %, CT 12.6 %, and ultrasonography 6.7 %. In simple radiography rate, a high rate was distributed on male(63.6 %), thoracicsurgery part(90.0%), admission patient(74.9 %), and long stayed patient at ER. In special raiography rate, a high rate was observed in urologic part(28.6%), and in CT rate, observed neurosurgery part(49.2 %) and neurologic part(36.7%). Ultrasonography rate was high for female(8.8 %) and internal medicine part(15.9 %). There are distributed regional radiography rate in radiographic type that chest(55.3 %) is high in the simple radiography, urinary system(1.2%) in the special study, and brain(40.0 %) in the CT. Regional radiography rate according to diagnostic department also was showed highly for head(64.6%) in neurosurgery, chest(90.0%) in thoracic-surgery, abdomen(58.0%) in general-surgery, spine (40.0% ) in neuro-surgery, and pelvis(15.9%), upper extrimity(20.5%), and lower extrimity(31.8%) in orthopedic-surgery each. Mean radiographic case number per patient of simple radiography was sinificant on sex, age, transfer relation in both total and radiographic patients(p<0.05). Mean radiographic case number was highly distributed on male(2.2 case number) in sex, on thirties(2.7) in age, transfered patient(2.7) in patient type, and on neurosurgery(3.4) in diagnostic charged part. Total radiographic case number in regional part was highly distributed on chest(499 case number). Considering the above results, emergency radiographer should take care of the elder patient in emergency radiography and get hold of injury mechanism to decrease possible secondary injury during radiography. Because of high radiography rate of urinary system in special study, radiographer should know well about dealing with contrastmedia administration and related instrument. All radiographer who take charge emergency patient should cope with a emergency situation during radiography, Because head trauma patients is very important in patient care, especilly in CT at night, charged doctor should be always silted with CT room and monitoring-patient. Radiography was reqested by many diagnostic department in ER. Considering that rate of simple radiography is high, special room for emergency radiography should be established in ER area, and the radiographer of this room should be stationed radiologic technician who is career and can implement emergency patient care.

  • PDF

공항 콘크리트 포장 구조해석을 위한 3차원 유한요소 모형 개발 (Development of Three-Dimensional Finite Element Model for Structural Analysis of Airport Concrete Pavements)

  • 박해원;심차상;임진선;조남현;정진훈
    • 한국도로학회논문집
    • /
    • 제19권6호
    • /
    • pp.67-74
    • /
    • 2017
  • PURPOSES : In this study, a three-dimensional nonlinear finite element analysis (FEA) model for airport concrete pavement was developed using the commercial program ABAQUS. Users can select an analysis method and set the range of input parameters to reflect actual conditions such as environmental loading. METHODS : The geometrical shape of the FEA model was chosen by considering the concrete pavement located in the third-stage construction site of Incheon International Airport. Incompatible eight-node elements were used for the FEA model. Laboratory test results for the concrete specimens fabricated at the construction site were used as material properties of the concrete slab. The material properties of the cement-treated base suggested by the Federal Aviation Administration(FAA) manual were used as those of the lean concrete subbase. In addition, preceding studies and pavement evaluation reports of Incheon International Airport were referred for the material properties of asphalt base and subgrade. The kinetic friction coefficient between the concrete slab and asphalt base acquired from a preceding study was used for the friction coefficient between the layers. A nonlinear temperature gradient according to slab depth was used as an input parameter of environmental loading, and a quasistatic method was used to analyze traffic loading. The average load transfer efficiency obtained from an Heavy falling Weight Deflectomete(HWD) test was converted to a spring constant between adjacent slabs to be used as an input parameter. The reliability of the FEA model developed in this study was verified by comparing its analysis results to those of the FEAFAA model. RESULTS : A series of analyses were performed for environmental loading, traffic loading, and combined loading by using both the model developed in this study and the FEAFAA model under the same conditions. The stresses of the concrete slab obtained by both analysis models were almost the same. An HWD test was simulated and analyzed using the FEA model developed in this study. As a result, the actual deflections at the center, mid-edge, and corner of the slab caused by the HWD loading were similar to those obtained by the analysis. CONCLUSIONS : The FEA model developed in this study was judged to be utilized sufficiently in the prediction of behavior of airport concrete pavement.

복합스터드의 압축 좌굴 거동 (Behavior of Hybrid Stud under Compressive Load)

  • 이상섭;배규웅
    • 한국강구조학회 논문집
    • /
    • 제16권5호통권72호
    • /
    • pp.609-619
    • /
    • 2004
  • 유럽을 중심으로 스틸스터드의 약점으로 지목 받고 있는 열교현상을 억제하기 위한 스터드 개선 연구가 활발히 진행되고 있다. 이 연구는 크게 마감재와 접촉 면적을 줄이는 방법, 웨브면에서 열전달 경로를 늘이는 방법, 열전도성이 낮은 소재를 사용하는 방법, 그리고 스터드를 피복하는 방법으로 구분할 수 있다. 비교적 저층의 주거용 건축물을 대상으로 하는 국외의 경우 에너지 소비에 초점이 맞춰져 있지만, 본 연구의 경우 중층화를 대비하여 구조적 성능도 고려하여 아연도금강판(SGC58)과 FRP를 에폭시로 부착하여 150SL 형태의 복합스터드를 개발하였다. 복합스터드의 소재로는 두께 1.0mm과 1.2mm 강판과 두께 4mm(4ply), 6mm(6ply)의 FRP를 적용하였고, 4가지의 접합 상세에 대한 제작 및 실험을 통해 최종적으로 우수한 결과를 보인 2가지를 선택하였다. 이와 같은 과정을 거쳐 개발된 복합스터드의 압축 성능을 확인하기 위해 2가지 접합 상세에 대해 단면 높이인 150mm에 대해 3, 6, 9, 12배 길이에 대해 압축 실험을 계획하였고, 기존 스틸 스터드와 비교하기 위하여 동일 형태의 비교 실험체도 제작하였다. 실험결과, 복합스터드의 최대하중은 강판 두께 1.0mm인 경우 동일 두께의 스틸 스터드보다 평균 1.62배, 1.2mm인 경우 평균 1.46배 증가하였으며, 가력 종료 시점에 이르기까지 일체 거동을 보여 구조적으로 우수함이 입증되었다.

녹색꽃양배추 (Brassica oleracea L. var. italica)의 약배양 효율증진과 약유래 계통의 특성 (Factors Affecting Efficiency of Anther Culture and Phenotypic Characteristics of Anther -derived Progeny in Broccoli)

  • 남시춘;윤광현;백기엽
    • 식물조직배양학회지
    • /
    • 제26권3호
    • /
    • pp.189-195
    • /
    • 1999
  • 녹색꽃양배추의 약배양에 영향을 미치는 제 조건을 규명하고 다양한 유전적인 특성을 가진 품종들을 대상으로 다수의 계통을 유기하여 신품종 육성 소재로 이용하고자 실험한 결과는 다음과 같다. 배지시험 결과 B5배지에 NAA 0.1 mg/L + 2.4-D 0.1mg/L + 당 10% 처리구에서 배상체 발생율이 가장 높았으며 액체배지가 고체배지보다 5배 정도 배발생에 효과적이었다. 약접종 직후 35$^{\circ}C$ 고온처리 일수에 따른 시험에서는 1일처리가 가장 효과적이었으며 시일이 경과할수록 배상체 발생율이 현저히 저하되었다 품종간 배상체 유기율은 Green valient 2.8%에서 Haisi의 21%까지 차이가 심하였으나 이배체율은 62~74%로 품종간 큰 차이를 나타내지 않았다. Rokguray와 Haisi두 품종 약유래 계통의 포장특성 검정결과 초장, 엽수, 측지수, 화뢰의 지름은 다양한 변이를 보였으며 두 품종에서 유기된 계통들 중 조숙이며 초장이 크고 화뢰의 지름이 큰 계통과 중만생이며 엽수가 많고 화뢰의 지름이 작은 계통을 각각 5계통, 7계통을 선발하여 F$_1$육성 소재로 이용하였다.

  • PDF

배지응고제의 종류와 농도에 따른 벼 약배양 효율 (Effects of Gelling Agent Brands and Concentration on Rice Anther Culture)

  • 양세준;오병근
    • 식물조직배양학회지
    • /
    • 제25권5호
    • /
    • pp.295-299
    • /
    • 1998
  • 벼 약배양 배지에 첨가되는 배지응고제의 종류와 농도가 캘러스형성 및 식물체재분화에 미치는 영향을 구명하기 위하여 실험한 결과는 다음과 같다. 배지응고제인 Bacto agar(Difco, 04140-01), Agrose(Sigma, Type 1) 0.4% 처리에서 각각 39%, 55%의 캘러스형성율을 보였으나 농도가 높아질수록 캘러스 형성율이 현저하게 감소하였다. Gelrite(Kelco, 143364)의 0.2~0.8%처리에서는 농도에 따른 차이가 인정되지 않았으며 0.6% 처리에서 44%의 캘러스 형성율을 보였다. 고농도 배지응고제 처리에서 형성된 캘러스는 생장이 늦은 반면 작고 단단하며 백색에 가까운 배발생적인 특성을 보였다. 식물체재분화율은 고농도 배지응고제 처리에서 형성된 캘러스에서 양호하였으며, 또한 고농도 배지응고제가 첨가된 식물체분화배지에서 높았다. 저농도 배지응고제 처리에서 형성된 약치상후 60일된 캘러스는 식물체 재분화율이 급격히 감소하였다. 치상된 약에 대한 최종적인 식물체분화 효율을 향상시키기 위해서는 0.6∼0.8% Gelrite 첨가배지에서 형성된 캘러스를 1.6% Bacto agar 및 Agarose 또는 0.8% Gelrite 식물체분화배지에 이식할 것을 추천한다.

  • PDF