• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.395-398
• /
• 2007

Losing a child is one fear parents never want to experiences. Nothing can take away the anguish of it. Unfortunately, it happens all too often. A lost child problem is the social problem that all parents should be worried about. To this, this study applies RFID for lost child prevention. RFID technology is developing to position recognition technology in addition to functions to distinguish a thing. Although RFID is not designed for location sensing, but now it is regarded as a device to facilitate real time location awareness. It is also possible to transfer information in the USN. Those advantages of RFID can be integrated with LBS achieving much synergy. However, such technology is mostly used indoors and outdoor research case is short. Therefore, this study is the preceding study having progressed to actual application. This study verifies technical applied service, and presents a system configuration model. Finally, this paper confirms lost child prevention system utilization possibility.

• 에너지공학
• /
• 제17권3호
• /
• pp.161-166
• /
• 2008

본 논문은 배열회수보일러에서 부분부하 운전이 과열기 열성능에 미치는 영향을 조사하였다. 첫 단계로 가스터빈 최대부하와 부분부하 운전시 배열회수보일러 형태에 따른 가스터빈 배가스의 유동 특성을 전산유체해석을 통해 조사하였다. 다음으로는 수직형 배열회수보일러 과열기 튜브관군의 가스터빈 최대부하와 부분부하 운전 시 온도분포를 전산유동해석 결과를 이용해 계산하였으며, 이 결과와 실제 발전소 측정을 통해 획득한 온도분포 결과를 비교하였다. 마지막으로 부분부하 운전이 과열기 열성능에 미치는 영향을 살펴보았으며, 또한 부분부하 운전시에 유동의 불균일 현상을 제거할 수 있는 장치를 고안하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2464-2472
• /
• 2011

열차주행이 고속화 되고 콘크리트궤도가 건설되고 있는 가운데 레일 체결장치는 저탄성화로 전달하중, 소음, 진동 등을 저감 하려는 추세이다. 따라서 저탄성패드의 적용은 궤도전체의 내구성과 안정성에 미치는 영향이 크다고 할 수 있다. 본 연구에서는 선행연구에서 다룬 패드스프링계수별 정적해석과 실물반복재하시험에 이어 동적응답해석을 추가적으로 수행하였다. 열차바퀴를 실물로 모델링하여 레일위에서 직접 주행시킴으로서 이 때 발생하는 궤도각부의 변형특성을 비교 분석하여 저탄성패드의 스프링계수에 따라 노반으로 전달되는 하중의 저감 효과를 검토하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.274-274
• /
• 2012

We have researched on controlling an electron temperature and a plasma collision frequency to study the effect of collisions on helicon plasmas. So, we have designed and constructed an electron cyclotron resonance (ECR) heating system in the helicon device as an auxiliary heating source. Since then, we have tried to optimize experimental designs such as a magnetic field configuration for ECR heating and 2.45GHz microwave launching system for its power transfer to the plasma effectively, and have characterized plasma parameters using a Langmuir probe. For improving an efficiency of the ECR heating with R-wave in the helicon plasma, we would understand an effect of R-wave propagation with ECR heating in the helicon plasma, because the efficiency of ECR heating with R-wave depends on some factors such as electron temperature, electron density, and magnetic field gradient. Firstly, we calculate the effect of R-wave propagation into the ECR zone in the plasma with those factors. We modify the magnetic field configuration and this system for the effective ECR heating in the plasma. Finally, after optimizing this system, the plasma parameters such as electron temperature and electron density are characterized by a RF compensated Langmuir probe.

• 융복합기술연구소 논문집
• /
• 제10권1호
• /
• pp.13-17
• /
• 2020

Among the factors that must be taken into account when using thermal imaging cameras that are expanding their application to various fields, a basic study was conducted focusing on temperature on the effect of solar radiation on the photographed thermal image. Through all experiments, in order to use an image taken with a thermal imaging camera for an object installed or located outdoors, a separate temperature correction according to the size of solar radiation or a separate device to block the effect of solar radiation must be additionally installed. Since the temperature of the same object may vary in the thermal image taken indoors or outdoors, it is necessary to calibrate it through comparison with other temperatures as a reference point. In the case of measuring the temperature of a glossy surface such as metal indoors with a thermal imaging camera, it was confirmed that an environment that can remove the light reflection effect by the glossy surface must be constructed and photographed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1101-1104
• /
• 2005

As intelligence of robot is developed, consumer of robot changes by ordinary people. Intelligent service robot is produced to a target of ordinary people. It is risen that need the most service robot business. Among the control mobile robot because using network by real time. Do to appear on mobile phone LCD screen being transmitted image from device that acquire transmit of mobile phone user interface development and real time mobile robot in this study. Use the BREW that is Qualcomm's Mobile platform for mobile phone user interface development. Mobile phone JPEG compression function chooses excellent camera phone and display transmit image which send connection setting screen and mobile robot on LCD screen by real time. At the same time, materialize to make screen that can process button input that can control transfer of robot. Also, Relay Server used to help processing of protocol to control direction of mobile robot.

• 전기전자학회논문지
• /
• 제16권3호
• /
• pp.265-273
• /
• 2012

Data stability and leakage power dissipation have become a critical issue in scaled SRAM design. In this paper, an advanced 8T SRAM cell improving the read and write stability of data storage elements as well as reducing the leakage current in the idle mode is presented. During the read operation, the bit-cell keeps the noise-vulnerable data 'low' node voltage close to the ground level, and thus producing near-ideal voltage transfer characteristics essential for robust read functionality. In the write operation, a negative bias on the cell facilitates to change the contents of the bit. Unlike the conventional 6T cell, there is no conflicting read and write requirement on sizing the transistors. In the standby mode, the built-in stacked device in the 8T cell reduces the leakage current significantly. The 8T SRAM cell implemented in a 130 nm CMOS technology demonstrates almost 100 % higher read stability while bearing 20 % better write-ability at 1.2 V typical condition, and a reduction by 45 % in leakage power consumption compared to the standard 6T cell. The stability enhancement and leakage power reduction provided with the proposed bit-cell are confirmed under process, voltage and temperature variations.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1769-1776
• /
• 2016

For on-line partial discharge (PD) monitoring of rotating machines, a novel sensor is proposed, which can be installed on the power lead inside the terminal box of the machine. The sensor has been designed to have high capacitance, and minimal reflection of measured pulses. As a sensitivity of the sensor, transfer impedance $Z_t$ has been measured and compared to conventional coupler-type sensors. A simple method is presented for measuring $Z_t$ of coupler sensors, using a vector network analyzer and a practical lead-cable of rotating machine. Through this method, it became possible to measure the $Z_t$ of coupler sensors including the installation environment of them. The $Z_t$ of the proposed sensor is higher than that of same sized other conventional couplers at frequencies between 30 and 92 MHz. Another sensitivity test has been performed using a PD calibrator as a test pulse source. The proposed sensor has higher measured peak voltage than the conventional coupler type sensors when the same charges were input.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.282.1-282.1
• /
• 2016

The remarkable physical properties of two-dimensional (2D) semiconducting materials such as molybdenum disulfide ($MoS_2$) and tungsten disulfide ($WS_2$) etc. have attracted considerable attentions for future high-performance electronic and optoelectronic devices. The ongoing studies of $MoS_2$ based nonvolatile memories have been demonstrated by worldwide researchers. The opening hysteresis in transfer characteristics have been revealed by different charge confining layer, for instance, few-layer graphene, $MoS_2$, metallic nanocrystal, hafnium oxide, and guanine. However, limited works built their nonvolatile memories using entirely of assembled 2D crystals. This is important in aspect view of large-scale manufacture and vertical integration for future memory device engineering. We report $WS_2$ based nonvolatile memories utilizing functional van der Waals heterostructure in which multi-layered graphene is encapsulated between $SiO_2$ and hexagonal boron nitride (hBN). We experimentally observed that, large memory window (20 V) allows to reveal high on-/off-state ratio (>$10^3$). Moreover, the devices manifest perfect retention of 13% charge loss after 10 years due to large graphene/hBN barrier height. Interestingly, the performance of our memories is drastically better than ever published work related to $MoS_2$ and black phosphorus flash memory technology.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.93-100
• /
• 2014

The packaging with environment-friendly materials become more important issue since the concern for the environment and the disposal of waste such as the packaging materials has increased. Although the paper based packaging such as corrugated box are widely used as a typical environment-friendly packaging stuff, the heat insulation properties of paper packaging did not get many attention. In this study, the heat insulation properties of paper were deeply evaluated to improve the functional properties as packaging material of the cold storage goods. The simple device for evaluating the heat insulation of paper product was developed. Subsequently, the changes in the heat insulation depending on the paper structure and the addition of the inorganic fillers were investigated by using the instrument. The higher basis weight and the less beating time resulted in the bulkier structure and the less efficiency of heat transfer. The addition of the perlite powder as a filler resulted in the great increase in the heat insulation, although the addition of the calcium carbonate decreased the heat insulation potential of paper.