• 제목/요약/키워드: Transfer Die

검색결과 138건 처리시간 0.024초

교잡어, 참돔 (Pagrus major, ♀) × 감성동 (Acanthopagrus schregeli, ♂)의 성장 및 수온변화와 저염분 환경에서의 내성 (Growth and Environmental Tolerances (Water Temperature and Low Salinity) of Hybrid Female Red Sea Bream Pagrus major × Male Black Sea Bream Acanthopagrus schregeli)

  • 김양수;지승철;;;정관식
    • 한국수산과학회지
    • /
    • 제44권3호
    • /
    • pp.276-283
    • /
    • 2011
  • The growth and tolerance for water temperature and salinity were compared among red sea bream Pagrus major (RSB) black sea bream Acanthopagrus schregeli (BSB) and their hybrid ($F_1$), female RSB ${\times}$ male BSB. The growth of the $F_1$ fish did not differ until 27 days after hatching (dAH), after which the most rapid growth was observed until approximately 300 dAH, followed by RSB and BSB. However, the RSB had out grown the $F_1$ fish by approximately 303 dAH. By 480 dAH, the RSB were largest, followed by the $F_1$ and BSB groups. The tolerances for high and low water temperature were significantly different for each species and growth stage. The largest tolerance spectrum was observed in the BSB group, and the tolerance spectrums gradually decreased with increasing final body weight. During the salinity tolerance trials, all of the species started to die following transfer into freshwater (0 psu). BSB showed the highest survival rate when kept in fresh water for an average of 29.9 hours, while the $F_1$ fish were more tolerant than the RSB fish. The fish were increasingly tolerant to fresh water and changes in water temperature as they grew, while the size of the temperature spectrum remained unchanged but shifted to a lower temperature range with growth. Our results demonstrate that $F_1$ performed well in terms of growth compared to parental fish, with higher temperature and salinity tolerances than RSB, and is thus suggested to be a suitable aquaculture species for Korea and northeast China.

Computer Simulation for Die Filling Behavior of Semi-Solid Slurry of Mg Alloy

  • Lee, Dock-Young;Moon, Jung-Hwa;Seok, Hyun-Kwang;Kim, Sung-Bin;Kim, Ki-Bae
    • 한국주조공학회지
    • /
    • 제27권1호
    • /
    • pp.31-35
    • /
    • 2007
  • 본 연구에서는 Mg합금의 반응고성형 공정기술을 개발하기 위하여 여러 가지 전단속도와 냉각속도에 따른 Mg합금의 점도와 딕소트러픽 거동을 분석하였으며, 이를 전산모사연구와 비교 검토하였다. 전산모사연구에서는 미세조직과 공정변수를 고려한 반응고 슬러리의 유변학적 거동을 분석하였다. 반응고 온도영역에서의 Mg합금(AZ91D) 슬러리의 점도는 고상율에 따라 지수함수적으로 증가하였으며, 전단속도가 증가하면 감소하는 경향을 나타났다. Mg합금 슬러리의 유변학적 거동을 정확하게 분석하기 위하여 Carreau 모델을 사용하여 ANYCAST 프로그램에서 고압다이캐스팅용 금형으로의 Mg합금 반응고 슬러리의 충진거동을 모사하였다. 전산모사된 결과는 동일한 조건에서의 실제 실험결과와 잘 일치하였다.

119구급대원의 응급구급활동과 관련한 형법적 책임 (A Criminal Responsibility of Aid by 119 Rescuer)

  • 윤상민
    • 한국화재소방학회논문지
    • /
    • 제20권4호
    • /
    • pp.77-90
    • /
    • 2006
  • 119구급대원의 응급구급활동과 관련하여 형사법적으로 문제되는 영역은 크게 세 가지이다. 첫째는 구급 요청을 거절하는 행위이며, 둘째는 요구호자를 이송하지 않는 미이송 행위이고, 셋째는 응급처치행위이다. 이러한 일련의 구급대원의 행위들이 '응급의료에 관한 법률'이나 관련 법규의 규정에 위반되어 이루어진 경우에는 이들 법률들에 규정된 범죄행위가 성립한다. 특히 정당한 이유 없이 구급요청을 거절한 행위는 응급의료법상 응급의료거부죄가 성립하고, 적법한 절차에 의하지 아니한 응급처치는 무단 응급처치죄가 성립한다. 또한 구급요청거절과 미이송 행위 그리고 응급처치나 미응급처치 등으로 인해 요구호자가 사망하거나 상태가 악화된 경우에는 형법상 살인죄나 업무상과실치사죄 또는 중상해죄가 성립할 수 있다. 이처럼 구급대원의 경우에는 구급활동과 관련하여 형사적 책임으로부터 자유로울 수가 없다. 즉 구급대원들도 직무의 소홀과 과실로 인해 발생하는 법익침해적 결과에 대해서는 당연히 형사적 책임을 져야 한다. 그러나 긴급상황에서 불가피하게 국민의 생명과 건강을 침해한 경우에는 이들을 보호할 수 있는 법적 방안도 마련되어야 하며, 특히 열악한 근무환경에서 구급대원에게만 그 책임을 전가할 수 없는 게 현실이다. 현재 구호자보호법 제정문제가 논의되고 있는데, 이 법률에 구급대원의 형사면책부분이 합리적으로 규정되어 궁극적으로 구급대원들이 국민의 생명과 건강을 지키는 파수꾼으로서 그 역할에 충실할 수 있도록 하여야 한다.

양면 마이크로 패턴 차량용 후육 라이트 가이드의 사출성형 패턴 전사성에 관한 연구 (Study of injection molded pattern transferability of double-sided micro-patterned automotive thick light guides)

  • 이동원;김상윤;김지우;김종수;이성희
    • Design & Manufacturing
    • /
    • 제17권4호
    • /
    • pp.42-51
    • /
    • 2023
  • In this study, we investigated the injection molding technology of thick-walled light guides, which are parts that control the light source of automotive lamps. Through injection molding analysis, the gate position that can minimize product shrinkage and deformation was selected, and a mold reflecting the analysis results was manufactured to evaluate the effect of injection speed and holding pressure on transferability during micro-pattern molding through experiments. When designing an injection mold for products with varying thicknesses, it was found that installing the gate on the side of the thicker part was advantageous for reducing volume shrinkage and deformation. It was found that the effect of shrinkage due to thickness may be greater than the position of the gate on pattern transferability. The pattern transfer error decreased as the injection speed and holding pressure increased, and it was found that increasing the injection speed was relatively effective.

부분 악궁 인상채득 후 패턴레진 트랜스퍼코핑을 이용하여 주모형을 재구성한 완전 구강 회복술 증례 (Complete mouth rehabilitation case with reconstructed master cast using pattern resin transfer copings after partial dental arch impression taking: A case report)

  • 이명서;하승룡;이종혁;최유성
    • 대한치과보철학회지
    • /
    • 제62권3호
    • /
    • pp.224-233
    • /
    • 2024
  • 본 증례의 환자는 69세 남환으로 심한 치아 마모로 인하여 수직교합고경 감소 및 전치부의 과개교합을 보였고 심미 및 기능의 회복을 위하여 완전 구강 회복술을 계획하였다. 치질이 부족한 치아들의 치은 연하 마무리선의 존재 및 임시치관의 변연부 적합 불량, 구강 위생 관리의 미흡 등으로 다수 치아의 치은 과증식 및 출혈이 일어났고 부정확한 인상채득이 이루어졌다. 각 악궁을 분할하여 부분 인상을 채득한 후 각각의 작업모형 다이상에서 패턴레진을 이용하여 트랜스퍼코핑을 제작하였고, 구강 내 지대치에 위치시킨 후 픽업인상채득을 통해 하나의 주모형을 제작하여 보철물을 제작하였다. 2차 주모형 상에서 제작된 최종보철물은 인접면 접촉, 변연 적합도, 수직교합고경, 안모, 심미, 교합 면에서 술자와 환자 모두 만족하였기에 이를 보고하고자 한다.

Total Dietary Fiber and Mineral Absorption

  • Gordon, Dennis-T.
    • Journal of Nutrition and Health
    • /
    • 제25권6호
    • /
    • pp.429-449
    • /
    • 1992
  • The consumption of foods rich in TDF should not be associated with impaired mineral absorp-tion and long-term mineral status. In surveys of populations consuming high amounts of TDF e.g Third World populations and vegetarinas gross deficiencies in mineral nutrition have not been noted. If mineral status is low among these groups it is most likely caused by the inadequacy or imbalance of the diet and not by the TDF. The key word is interaction which should be inte-rpreted in dietary imbalances that produce nut-rient deficiencies. There are no strong data to support the concept that TDF inhibits mineral absorption through a binding chelation mechanism. Limited data sug-gest that positively charged groups on polymers such as chitosan and cholestyramine will decrease iron absorption in humans and animals. Because TDF does not contain positively charged groups future research should be directed at the possible role of protein consumed along with TDF and the combination of effects on mineral nutrition Phytic acid is acknowledged as a potent chela-tor of zinc. However its association with zinc and its propensity to lower Zn bioavaiability may enhance the absorption of other elements notably copper and iron. The importance of interactions among nutrients including TDF will gain addi-tional attention in the scientific community. Soluble and insoluble dietary fiber function di-fferently in the intestine. Insoluble fibers accele-rate movement through the intestine. Soluble die-tary fibers appear to regulated blood concentra-tions of glucose and cholesterol albeit by some unknown mechanism. In creased viscosity produ-ced by the SDF in the intestine may provide an explanation of how this class of polymers affects plasma glucose cholesterol and other nutrients. Employing a double-perfusion technique in the rat we demonstrated that viscosity produced by SDF will delay transfer of zinc into the circulatory system. This delayed absorption should not be interpreted as decreased utilization. A great deal of additional research is required to prove the importance of luminaly viscosity produced by SDF on slowing nutrient absorption or regulating bllod nutrient homeostasis. Increased intake of TDF in the total human diet appears desirable. A dietary intake of 35g/day should not be considered to have a negative effect on mineral absorption. It is important to educate people that an intake of more than 35g TDF/day may cause an imbalance in the diet that can adve-rsely affect mineral utilization. Acknowledgments. Appreciation is given to Dr. George V. Vahouny(deceased) who was intense a great competitor in and out of science and who gave the author inspiration Portions of this work were supported by the University of Missouri Ag-ricultural Station and by a grant from the Univer-rch Support Grant RR 07053 from the National Institutes of Health. Contribution of the Missouri Agriculatural Experiments Station Journal Series No. 10747.

  • PDF

고체산화물 연료전지 연료극 및 전해질 미세구조 최적화 (Optimization of anode and electrolyte microstructure for Solid Oxide Fuel Cells)

  • 노종혁;명재하
    • Korean Chemical Engineering Research
    • /
    • 제57권4호
    • /
    • pp.525-530
    • /
    • 2019
  • 고체산화물 연료전지의 성능과 안정성은 전극의 기공률, 기공 분포와 전해질의 치밀도, 두께에 따라 결정 된다. 연료극의 기공률과 기공 분포는 활성면적와 연료 흐름에 영향을 주고, 전해질의 치밀한 미세구조와 두께는 단위전지의 Ohmic 저항에 영향을 준다. 하지만 이를 위해 값 비싼 공정 장비를 이용하거나 여러 단계의 제작 공정이 추가 될 경우 단위전지 제작비가 증가하므로 상업화를 목표로 하는 연구에는 적합하지 않다. 본 연구에서는 위와 같은 문제점들을 해결하기 위하여 상용 소재 기반의 NiO-YSZ 연료극을 선정 후 간단한 혼합 방법 및 일축가압 성형법과 담금코팅(dip coating) 공정을 사용하여 저비용 고효율의 세라믹 공정 기반의 고성능 단위전지를 제작하였다. 연료극의 기공률은 기공형성제로서 사용되는 카본 블랙(CB, carbon black)의 첨가량(10~20 wt%)과 최종 소결온도($1350{\sim}1450^{\circ}C$)를 변경하며 제어하였고, YSZ 전해질의 두께와 미세구조는 담금코팅 슬러리의 고상 분말량(YSZ, 1~5 vol%)을 제어하여 치밀한 박막의 전해질을 구현하고자 하였다. 그 결과 Ni-YSZ 연료극에서 최적의 값으로 잘 알려진 40%의 기공률은 카본 블랙을 15 wt% 첨가하고최종소결온도를 $1350^{\circ}C$로설정함으로써얻을수있었다. 담금코팅을통한 YSZ 두께는 $2{\sim}28{\mu}m$까지 제어가 가능하였고, 3 vol%의 고상분말량에서 치밀한 전해질 미세구조가 형성되었다. 최종적으로 40%의 기공률을 갖는 Ni-YSZ 연료극, $20{\mu}m$ 두께의 치밀한 YSZ전해질, LSM-YSZ 공기극으로 구성된 단위전지는 $800^{\circ}C$에서 $1.426Wcm^{-2}$의 우수한 성능을 얻을 수 있었다.

핵치환에 의한 cloning, stem cell, 그리고 효소 telomerase (Mammalian Cloning by Nuclear transfer, Stem Cell, and Enzyme Telomerase)

  • 한창열
    • 식물조직배양학회지
    • /
    • 제27권6호
    • /
    • pp.423-428
    • /
    • 2000
  • In 1997 when cloned sheep Dolly and soon after Polly were born, it had become head-line news because in the former the nucleus that gave rise to the lamb came from cells of six-year-old adult sheep and in the latter case a foreign gene was inserted into the donor nucleus to make the cloned sheep produce human protein, factor IX, in e milk. In the last few years, once the realm of science fiction, cloned mammals especially in livestock have become almost commonplace. What the press accounts often fail to convey, however, is that behind every success lie hundreds of failures. Many of the nuclear-transferred egg cells fail to undergo normal cell divisions. Even when an embryo does successfully implant in the womb, pregnancy often ends in miscarriage. A significant fraction of the animals that are born die shortly after birth and some of those that survived have serious developmental abnormalities. Efficiency remains at less than one % out of some hundred attempts to clone an animal. These facts show that something is fundamentally wrong and enormous hurdles must be overcome before cloning becomes practical. Cloning researchers now tent to put aside their effort to create live animals in order to probe the fundamental questions on cell biology including stem cells, the questions of whether the hereditary material in the nucleus of each cell remains intact throughout development, and how transferred nucleus is reprogrammed exactly like the zygotic nucleus. Stem cells are defined as those cells which can divide to produce a daughter cell like themselves (self-renewal) as well as a daughter cell that will give rise to specific differentiated cells (cell-differentiation). Multicellular organisms are formed from a single totipotent stem cell commonly called fertilized egg or zygote. As this cell and its progeny undergo cell divisions the potency of the stem cells in each tissue and organ become gradually restricted in the order of totipotent, pluripotent, and multipotent. The differentiation potential of multipotent stem cells in each tissue has been thought to be limited to cell lineages present in the organ from which they were derived. Recent studies, however, revealed that multipotent stem cells derived from adult tissues have much wider differentiation potential than was previously thought. These cells can differentiate into developmentally unrelated cell types, such as nerve stem cell into blood cells or muscle stem cell into brain cells. Neural stem cells isolated from the adult forebrain were recently shown to be capable of repopulating the hematopoietic system and produce blood cells in irradiated condition. In plants although the term$\boxDr$ stem cell$\boxUl$is not used, some cells in the second layer of tunica at the apical meristem of shoot, some nucellar cells surrounding the embryo sac, and initial cells of adventive buds are considered to be equivalent to the totipotent stem cells of mammals. The telomere ends of linear eukaryotic chromosomes cannot be replicated because the RNA primer at the end of a completed lagging strand cannot be replaced with DNA, causing 5' end gap. A chromosome would be shortened by the length of RNA primer with every cycle of DNA replication and cell division. Essential genes located near the ends of chromosomes would inevitably be deleted by end-shortening, thereby killing the descendants of the original cells. Telomeric DNA has an unusual sequence consisting of up to 1,000 or more tandem repeat of a simple sequence. For example, chromosome of mammal including human has the repeating telomeric sequence of TTAGGG and that of higher plant is TTTAGGG. This non-genic tandem repeat prevents the death of cell despite the continued shortening of chromosome length. In contrast with the somatic cells germ line cells have the mechanism to fill-up the 5' end gap of telomere, thus maintaining the original length of chromosome. Cem line cells exhibit active enzyme telomerase which functions to maintain the stable length of telomere. Some of the cloned animals are reported prematurely getting old. It has to be ascertained whether the multipotent stem cells in the tissues of adult mammals have the original telomeres or shortened telomeres.

  • PDF