• 멤브레인
• /
• 제19권4호
• /
• pp.268-276
• /
• 2009

본 연구에서는 기존의 중량법과 광산란법과는 원리와 기술이 다른 입도별 부유물질 측정용 분리막 모듈 및 장치를 개발하기 위한 원리를 수립하기 위한 기초 자료를 확립하고자 하였다. 이러한 목적을 위하여, 이산화규소 및 덱스트란(dextran), 카올린(kaolin), PEG (polyethylene glycol) 부유용액을 대상으로 유리섬유 여과지 GF/C와 GF/A를 분리막 모듈에 장착하여 여과시키면서, 디지털 압력계를 사용하여 막간압력차(TMP, Trans-membrane pressure) 변화를 측정하였다. 모사용액의 농도와 TMP 변화율 기울기의 상관관계식을 TMP 변화 실험 결과로부터 구하여, TMP 변화 기울기로부터 시료의 농도를 예측할 수 있도록 하였다.

• 대한환경공학회지
• /
• 제33권9호
• /
• pp.656-661
• /
• 2011

본 연구에서는 공경 $0.1{\mu}m$, 막여과 유속$3.0m^3/m^2{\cdot}d$의 국산 세라믹 막을 이용하여 음용수를 생산하는 기술에 대해 조사하였다. 세라믹 막의 성능 평가를 위해 $1m^3/d$ 규모의 pilot-scale 실험장치를 제작하였으며, 역세주기에 따른 차압변화와 전오존이 차압변화에 미치는 영향을 조사하였다. 차압상승률은 역세주기에 비례하여 증가하였으나, 전오존 주입을 통해 차압상승률을 낮출 수 있었다. 이 결과는 전오존이 파울링 감소에 효과가 있음을 의미한다. 1 mg/L의 전오존을 주입하고 5 min간 접촉하였을 때, 역세주기 1시간에서 차압상승률은 약 30% 감소하였다. 전오존 접촉시간을 5~15 min으로 변경하면서 운전한 결과, 접촉시간에 따른 차압상승률에는 차이가 없었다. 그러나, 차압상승률은 오존 주입농도가 증가하면 감소하는 경향을 보였다.

• 상하수도학회지
• /
• 제30권1호
• /
• pp.1-8
• /
• 2016

Temperature correction trans-membrane pressure (TC-TMP) is frequently used as a fouling index in membrane water treatment plants. TC-TMP equation is derived based on an assumption that the total membrane resistance (i.e. the sum of the intrinsic membrane resistance and fouling resistance) is not affected by temperature. This work verified the validity of this assumption using microfiltration (MF) and ultrafiltration (UF) membranes with and without fouling. The foulants used in the work were kaolin (inorganic) and humic acid (organic). The intrinsic resistances of MF and UF membranes remains at constant values regardless of temperature change. When the same amount of foulants were accumulated on the membrane, inorganic fouling resistance with kaolin was constant regardless of temperature change while organic fouling resistance with humic acid decreased at higher temperatures, which means that TC-TMP cannot be used as a fouling index when organic fouling occurs in a real field application. Since TC-TMP underestimates the amount of fouling at higher temperatures, more attention should be necessary in the operation of membrane water treatment plant in a hotter season like summer.

• 멤브레인
• /
• 제17권3호
• /
• pp.191-196
• /
• 2007

본 연구에서는 경도 이온의 화학적 침전을 위하여 지하수에 과량의 Lime-Soda ash를 주입하여 플럭(floc)을 형성한 다음 침전과정을 십자흐름(Crossflow) 방식의 관형 세라믹 분리막을 이용한 한외여과(UF) 공정으로 대체하였다. 그 결과 두유 포장팩 세척수로 사용하고 있는 지하수의 총경도를 10 mg/L as $CaCO_3$ 이하로 감소시킬 수 있었다. 한편, TMP(Trans-membrane pressure) 및 유량 변화 실험에서 투과선속(Permeate flux, J) 및 무차원한 투과선속($J/J_0$) 변화를 조사하여, TMP 및 유량이 무기물로 형성된 응집 플럭에 의한 막오염에 미치는 영향을 알아보았다. 그 결과, 본 실험 범위에서 TMP 및 유량 변화가 막오염과 총경도 제거율에 미치는 영향은 거의 없었다.

• Korean Membrane Journal
• /
• 제1권1호
• /
• pp.100-105
• /
• 1999

A novel system to thicken the concentrated colloidal solution from membrane water treat-ment processes was developed. A hollow-fiber microfilter(hydrophilic polyethylene nominal pore size 0.1 ${\mu}$m total surface area 0.42 m2) was installed in an acrylic housing that has an aeration port 5 cm below the membrane and a clarifier in the bottom. The concentrate was uniformly supplied from the top of the housing. Bacuum filtration caused downward flow of concentrate and as a result thickening interface. The addition of poly-aluminum chloride (PAC) resulted in rapid increase of trans-membrane pressure (TMP) and in no improvement of the filtered water turbidity and thickening process. Two types of con-centrate and concentrate turbidity had little effect on the increase of TMP and concentrate thickening. It was observed that for the same height of membrane housing membrane surface area to housing volume (A/V) ratio had significant effect on the increase of TMP. When the housing volume was increased ten times the increasing rate of TMP was three times faster as compared to the original housing. A hydraulic model successfully simulated the formation and sedimentation of thickening interface.

• Membrane and Water Treatment
• /
• 제9권5호
• /
• pp.353-361
• /
• 2018

Fouling characteristics of humic substances on tight ultrafiltration (UF) membrane have been investigated. The tight UF membrane was prepared by blending polysulfone (PSf) in N.N-dimethylacetamide (DMAc) with 25%wt of Polyethylene glycol (PEG400) and 4%wt of acetone. Fouling characteristic of the modified PSf membrane was observed during peat water filtration in different trans-membrane pressure (TMP). It was found that the acetone modified membrane provided 13% increase in TMP during five hours of peat water filtration, where a stable flux was reached within 150 minutes. Meanwhile, the increase of TMP from 10 psig to 30 psig resulted in a fouling resistance enhancement of 60%. Furthermore, based on the fouling analysis, fouling mechanism at the first phase of filtration was attributed to intermediate blocking while the second phase was cake formation.

• 한국물환경학회지
• /
• 제18권2호
• /
• pp.159-168
• /
• 2002

A lab-scale Reverse Osmosis(RO) membrane reactor was installed to investigate the membrane permeability, characteristics of membrane fouling at each conditions, and performance of elimination at different trans-membrane pressure(TMP) in the liquid fertilizer accumulated system. Experimental setup was divided to three different TMP conditions. As a result of experiment, permeability of RO membrane was proportional to the increase of TMP and temperature. After experiment was completed, two types chemical cleaning(remove the organic foulant and inorganic foulant) was done, and recover rate of permeability was each 99.8, 99.7 and 99.7%, respectively. From this experimental data, membrane fouling could be determined that the most of it was recoverable in this system, and major reason of fouling was concentration polarization. Elimination rate of solute substance in the liquid fertilizer indicated very stable(above 99%), except ammonia nitrogen, and the most stable elimination rate was investigated at the highest TMP condition (Run 3).

• 멤브레인
• /
• 제1권1호
• /
• pp.100-100
• /
• 1991

A novel system to thicken the concentrated colloidal solution from membrane water treat-ment processes was developed. A hollow-fiber microfilter(hydrophilic polyethylene nominal pore size 0.1 μm total surface area 0.42 m2) was installed in an acrylic housing that has an aeration port 5 cm below the membrane and a clarifier in the bottom. The concentrate was uniformly supplied from the top of the housing. Bacuum filtration caused downward flow of concentrate and as a result thickening interface. The addition of poly-aluminum chloride (PAC) resulted in rapid increase of trans-membrane pressure (TMP) and in no improvement of the filtered water turbidity and thickening process. Two types of con-centrate and concentrate turbidity had little effect on the increase of TMP and concentrate thickening. It was observed that for the same height of membrane housing membrane surface area to housing volume (A/V) ratio had significant effect on the increase of TMP. When the housing volume was increased ten times the increasing rate of TMP was three times faster as compared to the original housing. A hydraulic model successfully simulated the formation and sedimentation of thickening interface.

• 상하수도학회지
• /
• 제27권1호
• /
• pp.139-146
• /
• 2013

A process diagnosis method for membrane water treatment plant was developed using a constant flux membrane fouling model. This diagnosis method can be applied to a real-field membrane-based water treatment plant as an early alarming system for membrane fouling. The constant flux membrane fouling model was based on the simplest equation form to describe change in trans-membrane pressure (TMP) during the filtration cycle from a literature. The model was verified using a pilot-scale microfiltraton (MF) plant with two commercial MF membrane modules (72 m2 of membrane area). The predicted TMP data were produced using the model, where the modeling parameters were obtained by the least square method using the early plant data and modeling equations. The diagnosis was carried out by comparing the predicted TMP data (as baseline) and real plant data. As a result of the case study, the diagnsis method worked pretty well to predict the early points where fouling started to occur.

• 상하수도학회지
• /
• 제22권4호
• /
• pp.445-448
• /
• 2008

The application of the membrane filtration process has been increased for the drinking water treatment system because of excellent quality of treated water compared with the sand filtration process. The selection of suitable pre-treatment processes and optimum flux according to the characteristics of raw water are important factors for the design of membrane processes. In this study, the most efficient pre-treatment processes for drinking water was selected by investigating the effects of pre-treatment processes on the operational stability of the membrane filtration process. Both lab-scale and pilot-scale experiments were conducted. In the lab-scale test, the effect of pre-treatment processes on the stability of the membrane filtration process was investigated indirectly by comparing the performance of membrane flux for raw water, pre-treated water, and membrane permeated water. In the pilot-scale test, the usefulness of prefiltration processes was assessed by comparing the performance of single membrane process and hybrid coagulation-membrane process. The results indicated that the coagulation process contributed to the stabilization of trans-membrane pressure (TMP) by removing contaminants on membranes, though the pre-filtration process had little effect on the TMP.